







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Fairview, TX: What the Job Actually Takes
Cabinets & countertops in Fairview, TX typically run $14,000 to $45,000 for a full kitchen’s worth of cabinetry and stone, with most of that landing in the $22,000 to $32,000 range once you account for the finish grade this town builds to. Plan on four to seven weeks from demo to final caulk on a full swap, longer if the layout moves. Call (844) 560-0925 for a free on-site estimate, and we’ll put real line items in front of you instead of a lump sum.

How the work actually runs, day by day

Custom-home buyers in Fairview tend to expect a precise sequence, and they’re right to. Here’s the one we run. Each stage has a decision sitting on it, and the homeowner owns that decision, not us.
Stage 1: Measure and verify (day 1). We template the existing space, check wall plumb and floor level, and photograph the plumbing and electrical rough-in behind the current cabinets. On acreage lots with slab work, we also note any crack pattern in the slab. The decision here is whether the layout stays put or moves. Moving a sink or range is a real cost, and we price it before anyone swings a hammer.
Stage 2: Demo and prep (days 2-3). Cabinets come out, the substrate gets exposed, and we repair what the old install hid: soft drywall, out-of-square corners, old valve bodies. This is where surprises live, and it’s why we don’t quote blind. The homeowner’s decision at this stage is whether to upgrade the wall finish behind the uppers.
Stage 3: Cabinet set (days 4-6). Boxes go in, level, shimmed, and scribed to the wall. Crown and filler get fit to the actual ceiling, not the nominal one. Your decision: door style and finish confirm before the order drops, which is why we lock this at least six weeks ahead of install on semi-custom lines like KraftMaid.
Stage 4: Template and stone fabrication (days 7-14, calendar time). Once cabinets are set, the countertop gets templated. That template goes to the fabricator, and slabs get cut. Real quartz and natural stone take a week or two of shop time, and that’s not something anyone should rush. Your decision: slab selection and edge profile, which you’ll want to make in person at the slab yard, not from a photo.
Stage 5: Countertop set, backsplash, punch (days 15-21). Stone goes down, seams get placed where they read least, and the sink gets undermounted and sealed. Then the small stuff: toe kicks, caulk, hardware pulls, touch-up. We walk it with you and fix anything on the list before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between, and what each one really costs you
The cabinet and countertop choices are where Fairview budgets either hold or blow past the top of the range. Here’s the honest read on each.
- Semi-custom cabinets (KraftMaid and similar): The sweet spot for most of this town. You get real plywood boxes, dovetail drawers, and a finish you can order in a specific paint or stain. Lead time runs six to ten weeks. The trade-off is cost and waiting, but the hardware and box quality outlast stock cabinets by a decade or more.
- Stock or ready-to-assemble boxes: Cheaper and faster, often in a week. Particleboard boxes and stapled joints hold up fine in a guest kitchen and poorly in a busy family one. If you’re flipping or furnishing a secondary space, they make sense. If you’re staying put, they usually don’t.
- Quartz (Cambria, Silestone, and the like): Non-porous, no sealing, consistent pattern. It’s the default in Fairview for good reason. The trade-off is that quartz won’t tolerate a hot pan set down directly, and the seam color can vary slab to slab, so review the actual slab before cutting.
- Natural granite or marble: Granite is tougher and more forgiving than most people think. Marble is beautiful and will etch from lemon juice and red wine. If you cook hard and want stone, granite. If it’s a showpiece kitchen, marble is a legitimate call and you should know the maintenance it brings.
- Edge profile and thickness: A standard eased edge is included in most fabricator pricing. A mitered or built-up edge adds cost and visual weight. Three-centimeter slab is standard; two-centimeter with a built-up edge can read as thick for less money.
What Cabinets & Countertops costs in Fairview, TX
Here’s the range, by line item, from real jobs in this market:
| Line item | Fairview range |
|---|---|
| Cabinets & countertops, full kitchen | $14,000 – $45,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island | $3,000 – $10,000 |
| Backsplash | $800 – $2,500 |
Four things push a Fairview job toward the top of that range. First, size: a 12-foot run of uppers and lowers costs a fraction of an L-shaped layout with an island. Second, existing condition: out-of-square walls or a floor that’s settled require shimming and scribing that add labor hours nobody sees. Third, moving plumbing, gas, or electrical: relocating a sink or range easily adds several thousand. Fourth, material grade and slab choice: a premium quartz or a rare granite can swing the countertop line by 40%.

A written estimate from us lists cabinets, stone, fabrication, install labor, demo, and disposal as separate lines. What it doesn’t cover unless we quote it in: moving a gas line, adding an outlet, structural changes, or painting. If you’re weighing a wider scope, our Kitchen Remodeling in Fairview page covers the full project.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview homes specifically do to this job
Fairview is a small, affluent Collin County town, ZIP 75002, where almost all construction work is new custom-home building or major renovations on large wooded lots rather than repairs to older housing stock. The town is nearly built out, so contractors here spend as much time on tear-downs and lot-by-lot infill as on new subdivision work. That changes this job in a specific way: nearly every kitchen we touch was built in the last twenty years to a high finish standard, which means the existing cabinets are often good boxes with a dated door and the countertop is often the first thing a homeowner upgrades. On wooded acreage lots we plan around mature trees and setbacks, and post-construction foundation movement from North Texas blackland clay is a common callback, so we check for out-of-level floors and slab cracks before setting a single cabinet. An out-of-level floor telegraphs into cabinet doors that don’t sit flush, and a countertop templated off a moving slab will show it at the seam. We also cover the surrounding towns, and our Fairview service-area page lays out what we handle locally.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Fairview

Four to seven weeks from demo to final walkthrough on a full kitchen, with cabinet lead time eating most of it. Install itself is roughly two weeks of on-site work; the rest is fabrication and waiting on doors and stone. Call (844) 560-0925 and we’ll give you a real calendar, not an estimate.
Straight cabinet and countertop swaps usually don’t require a permit, but moving plumbing, gas, or electrical does. Because Fairview is nearly built out and much of the work here is custom-home and renovation, the town inspects carefully when a permit is pulled. We pull permits where the scope requires them and pass inspection before we close out. Call (844) 560-0925 to talk through your scope.
Yes, and that’s the most common job we run in Fairview. Keeping the sink and range in place saves several thousand dollars and cuts weeks off the schedule. If you want a different layout, we’ll tell you upfront what the plumbing and electrical move adds before you commit. Call (844) 560-0925 for an exact number.
Most full kitchens here land between $14,000 and $45,000, with the typical job in the low-to-mid $20s to low $30s. Island work, premium stone, and layout changes push it higher; keeping the footprint cuts it. Every quote is line-item and fixed, with no change orders unless you ask for one. Call (844) 560-0925 for a free estimate.
Every cabinets & countertops project is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential space. If something isn’t right, we make it right. The number you see is the number you pay, backed in writing. Call (844) 560-0925 to get started.
Some Fairview homeowners pair this with a bigger addition, and we handle those too: Garage Conversion ADU in Fairview and New Detached ADU in Fairview are both jobs we run in this town, and our Kitchen Remodeling service covers the wider scope when a swap turns into a full rebuild.
Get a free on-site estimate for Cabinets & Countertops in Fairview
We’ll measure your space, walk the existing cabinets and stone, and hand you a written line-item estimate with the real ranges for what you’re considering. That’s the whole call. No pressure, no guessing, and a live person answers (844) 560-0925 whenever you call. If you’re ready to price the job and see honest numbers, reach out today. Our technicians have up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












