







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Fairview, TX: What the Job Actually Involves
Exterior door installation in Fairview, TX runs roughly $1,800 to $6,500 per door, with most single-door replacements landing between $2,500 and $4,000. The job means removing the old slab and frame, checking and shimming the rough opening, flashing and sealing the new unit, and hanging and tuning the hardware. A straight replacement takes one day. Call (844) 560-0925 for a free on-site estimate with line-item pricing before anything is ordered.

How We Install a Door in Fairview, Start to Finish

Door work goes sideways when the rough opening gets ignored. On Fairview’s custom homes, that opening is usually square and true. On the tear-down infill lots, it sometimes isn’t. Here’s the sequence we run.
Stage 1: Measure and inspect (day 1, about an hour)
We measure the rough opening, check it for plumb and square, and look at the wall assembly behind the trim. That’s where we find the rot, the missing header, or the framing that shifted. You decide the material and swing direction at this stage, because both drive the order.
Stage 2: Order and lead time (typically 2 to 5 weeks)
Stock Therma-Tru fiberglass units are usually ready in days. Custom sizes, wood doors, and sidelight configurations take longer. You pick the glass package and finish here. We don’t order until you’ve signed the line-item estimate, so nothing gets charged that you didn’t approve.
Stage 3: Tear-out (the morning of install, 1 to 2 hours)
The old door, frame, and threshold come out. We cut back the interior and exterior trim and expose the framing so we can see what we’re working with. If there’s damaged sheathing, you get a call before we do anything about it.
Stage 4: Set, flash, and seal (2 to 4 hours)
The new unit goes in plumb and level, shimmed at the hinges and lock side. We flash the opening, seal the sill, and insulate the gap. This is the part that keeps North Texas rain and wind out of your wall cavity, and it’s where cheap installs fail.
Stage 5: Trim, hardware, and test (1 to 2 hours)
Interior and exterior trim go back on, the lockset and deadbolt get installed, and we test the swing and latch against the strike plate. You walk the door with us, open and close it, and approve the work before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Fairview Door
A door is a wall panel with a lock in it, until you start pricing it. Then it’s a spec sheet. Here’s the honest trade-off on the choices that actually move your quote.
- Fiberglass (Therma-Tru and similar): the hardest value to beat for exterior entry. It doesn’t split, warp, or take finish the way wood does. Suits Fairview’s sun-facing doors that bake all afternoon. Roughly the middle of the price range.
- Steel: the lowest entry price and the most secure core for a solid door. It dents, and it will need repainting. Fine for a garage entry, less so for your front door.
- Wood (solid core, oak or mahogany): the premium pick. Real weight, real grain, and real upkeep. Needs sealing and refinishing on a schedule, and Fairview’s dry summers will test it.
- Glass package: impact-rated laminated glass costs more but holds up against the spring hail that runs through Collin County every year. Plain glass is cheaper and more fragile.
- Sidelights and transoms: they add light and curb appeal, and they add cost per opening. Decide early because they change the rough opening dimensions.
- Smart locks and deadbolts: a great pairing on a new door, since the door is already off the wall and the wiring, if any, is exposed.
What Door Installation Costs in Fairview, TX
Most Fairview exterior door installations land between $1,800 and $6,500 per door, and that spread comes down to a few variables:

- Size and configuration: a standard 36-inch single slab is base price. A double door or a unit with sidelights can double or triple it.
- Wall condition: a rotted sill or compromised sheathing behind the trim adds framing and repair time. On Fairview’s newer homes this is rare, but on tear-down infill builds where an older structure survived, we see it.
- Material grade: steel to wood moves the number by a few thousand dollars on its own.
- Permit scope: like-for-like replacement usually doesn’t require a permit, but an added opening or a change to the rough opening does, and that adds inspection time and cost.
- Interior finish: if you want drywall patched and painted, that’s not in a base door install quote. It’s a separate line, and we’d rather show it to you than hide it.
What a written estimate includes: the door unit, tear-out and disposal, flashing and sealing, trim reinstallation, standard hardware, and the labor. What typically sits outside it: finish painting, drywall repair beyond trim, custom hardware, and any structural framing repairs found once the wall opens. Our pricing is upfront, no surprises. If a line isn’t listed, it isn’t charged.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview Homes Specifically Do to This Job
Fairview is nearly built out. Almost all the construction here is new custom-home building on the acre-plus wooded lots, or major renovation on the homes that already stand, plus the tear-downs and lot-by-lot infill that come with a town this small and affluent. That shapes the door work. The homes are newer, so a straight replacement is one day and the rough openings are usually square. But on wooded lots the doors face the trees, and the sun and shade cycles here load exterior finishes hard. The other factor is the blackland clay under every foundation in the 75002. Clay soils expand and shrink, and a settled wall racking the door frame is the most common callback we get on a door. We check the opening against the wall, not just the door against the casing, and we tell you before install whether the frame is going to move on you.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Fairview

A standard single exterior door install is one day, typically 4 to 7 hours of on-site work, with the order lead time of 2 to 5 weeks happening before the truck rolls. Custom sizes and sidelights can stretch the install to two days. Call (844) 560-0925 for a free estimate and a firm schedule.
A like-for-like replacement at the same size usually doesn’t need a permit, but widening an opening, adding a new door in a wall, or changing the structure of an opening does. We confirm the scope at the free estimate and pull any permits that are required. Call us to walk through it.
Yes, in most Fairview homes a same-size replacement touches only the door, trim, and framing immediately around the opening. Moving plumbing or electrical only comes up if you’re relocating the door or adding one where a wall currently sits. That’s a bigger line item and a different conversation, and we’ll flag it at the estimate.
Our workmanship is backed by the 730-Day Done Right Promise: if the install isn’t right, we make it right, for two full years. The door unit itself also carries the manufacturer’s warranty, which we walk you through. Call (844) 560-0925 to schedule your free estimate.
Often, yes. If you’re replacing the front entry, homeowners frequently pair this with Cabinets & Countertops in Fairview during a wider makeover, or a Garage Conversion ADU in Fairview where a new exterior door becomes a required opening. It’s part of a full Windows & Doors in Fairview scope when a whole wall is getting updated. Call for a scope review and a line-item estimate.
Get a Free Door Installation Estimate in Fairview
A new door is a straightforward job. Getting a straight answer about it shouldn’t be hard. Call (844) 560-0925 and a live person answers, any hour, any day. We’ll measure the opening, show you the material choices, and hand you a written line-item estimate, free. Our technicians have up to 12 years of experience and back every install with the 730-Day Done Right Promise. Windows & Doors and Fairview service, start to finish.
Written by the team at Groundwork Construction Co.












