







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Fairview, TX: What It Takes and What It Costs
Concrete driveways and concrete work in Fairview typically run $4,500 to $12,000 for a new pour, and most residential driveways are finished in about 5 to 8 working days from demo to drivable surface. A full replacement with tear-out of the old slab lands closer to $5,000 to $14,000. Call (844) 560-0925 for a free on-site estimate with a written, line-item number before anyone touches your slab.

The Problem We See Most in Fairview Is a Builder-Grade Slab Built Quick

Fairview is a small, affluent Collin County town where almost every concrete job is tied to new custom-home construction or a major renovation on a large wooded lot. The housing stock here is mostly large, relatively new single-family homes on one-plus-acre parcels, and the concrete under them was poured by builders working on a schedule. That’s where the trouble starts.
We get called out to Fairview driveways that are five to ten years old with hairline cracking, spalling at the apron, poor drainage that pools water against the garage slab, or a pour that was too thin for anything heavier than a sedan. On brand-new custom builds, the finish and the grading are the two things that get rushed, because the driveway is the last thing anyone notices on a walkthrough.
That’s the work we do here: fix it right the first time, or pour it right the first time. Either way, the number gets quoted upfront, the crew is background-checked and in uniform, and the finished pour sits under our 730-Day Done Right Promise. If it’s not right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How We Pour a Concrete Driveway in Fairview, Stage by Stage
Stage 1: Site walk and layout (day 1). We measure the driveway footprint, check slope and drainage away from the garage and foundation, and confirm where the expansion joints and control joints will fall. On wooded acreage lots, this is also where we flag root zones and setbacks. You decide the width, the finish, and the edge treatment before we order material.
Stage 2: Demo and subgrade prep (days 1-2). Old slab comes out, soil gets compacted, and we set the subbase at the right depth. This is the stage most fast pours skip, and it’s the stage that decides whether your Fairview driveway cracks in year three or holds for twenty. You’ll want to be available if we hit buried irrigation, a utility stub, or unknown fill under the slab.
Stage 3: Forming and reinforcement (days 3-4). Forms get set to grade, rebar or mesh goes in, and we confirm drainage fall. On Fairview’s blackland clay, the ground moves with wet and dry cycles, so getting the subgrade and the reinforcement right matters as much here as it does on the house foundation.
Stage 4: Pour and finish (day 5). The concrete goes in, gets screeded and floated, and the finish you chose (broom, exposed aggregate, saw-cut) gets applied. This is the day we watch the weather closely. North Texas summer heat can pull moisture out of a fresh pour fast, and we schedule around it.
Stage 5: Cure and drive-on (days 6-8). We pull forms, backfill edges, and let the slab cure. Most driveways are drivable in roughly 7 days with light use, and fully cured at 28 days. We walk the finished slab with you and hand over the warranty in writing.
The Options You’ll Choose Between for Concrete Work in Fairview
- Standard broom finish. The workhorse. Good grip, low cost, sits at the low end of the $4,500-$12,000 range. It’s what we recommend for most Fairview driveways unless you want a particular look.
- Exposed aggregate. Pebble surface, excellent traction, hides surface imperfections. Adds roughly 10-20% to the pour. Ideal if you’re worried about slickness in wet conditions.
- Saw-cut with a decorative pattern. A scored grid that reads like large pavers. Keeps the budget reasonable and still gives the drive some structure.
- Thickness and reinforcement. Standard residential is 4 inches over compacted subbase with mesh or rebar. If you park a heavy truck or have a long run, 5 to 6 inches with rebar is worth the upcharge.
- Base prep depth. 4 inches of compacted base is typical; deeper base costs more but pays back on a lot that drains poorly or sits on expansive clay. This is the single biggest variable in whether a Fairview pour holds.
- Drainage and grading. A swale, a channel drain, or a re-graded apron. Cheap insurance against water finding your garage door threshold.
If the concrete work is part of a bigger outdoor scope, we handle it as part of a full Driveway & Pavers in Fairview project. On outdoor structures and finish-out, we also see a lot of Fairview homeowners pair this with Door Installation in Fairview once the apron and entry are fresh.
See the difference
Before
After
Before
After
Before
AfterWhat Concrete Driveways & Concrete Work Costs in Fairview, TX
A new concrete driveway in Fairview runs $4,500 to $12,000. A full replacement with demo of an existing slab runs $5,000 to $14,000. Driveway sealing as routine maintenance runs $250 to $700. Here’s the line-item reality behind those numbers:

| Line item | Fairview range |
|---|---|
| New concrete driveway pour | $4,500 – $12,000 |
| Full driveway replacement (demo + new slab) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What pushes a Fairview job to the high end:
- Size and length. A long run out to a large wooded lot costs more than a short drive to a two-car garage.
- Existing slab condition. Thick, badly reinforced concrete is harder and slower to remove.
- Subgrade and drainage work. Fixing poor drainage, hauling in fill, or re-grading adds to the number.
- Finish and thickness. Exposed aggregate, decorative patterns, or 6-inch reinforced pours all sit at the top of the range.
- Permit scope. Where the driveway ties into a right-of-way or alters drainage, plan review adds time and cost.
Your written estimate includes demo, haul-off, base prep, reinforcement, pour, finish, joint cutting, and cleanup. It doesn’t include landscape repair, sprinkler relocation, or driveway widening beyond the drawn footprint. Those get line-itemed separately so there are no surprises.
What Fairview Homes Specifically Do to This Job

Fairview is nearly built out, so most of the concrete work here is either on a tear-down/infill lot or on a large custom home going up for the first time. The soil is the story. North Texas blackland clay expands and shrinks dramatically with our wet and dry cycles, and that movement gets telegraphed straight into a driveway slab if the subgrade and drainage aren’t handled seriously. We see callbacks on Fairview driveways where the water was never graded off-site, and the slab pays for it a few seasons later.
Because most of the local housing stock is large custom homes on one-plus-acre lots, driveways here run longer than in a typical subdivision. That means more joints, more grade to manage, and a higher chance a poor pour shows up at the apron where water collects. On wooded lots, root zones and setbacks also shape where a driveway can go. We plan around mature trees instead of cutting through them, and we schedule pours around summer heat and the spring hail window. We cover all of Fairview, and the team is up to 12 years experienced on pours exactly like these. If your project includes an accessory structure or detached garage, homeowners often pair this with ADU Site Prep & Utilities in Fairview so the driveway and utility trenches get planned as one scope.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Fairview
Most Fairview concrete driveways take 5 to 8 working days from demo to drivable, with full cure at 28 days. Weather, slab size, and permit scope are the three things that stretch that window. Call (844) 560-0925 for a schedule built around your specific lot.
Usually yes if the work touches the right-of-way, changes drainage, or is part of a larger permitted scope. A straight replacement within the existing footprint often doesn’t need one, but we confirm against the Town’s requirements before any pour. Call (844) 560-0925 and we’ll walk through what applies to your address.
Yes, when the base is sound we can overlay or add to the existing slab. When the base has failed, a tear-out and fresh pour is the only fix that lasts. We tell you which one you’re looking at in the estimate, not after the work starts.
New pours run $4,500 to $12,000, and full replacements run $5,000 to $14,000. Size, subgrade, finish, and permit scope are what move the number. Call (844) 560-0925 for a free written quote with the price locked in.
Every concrete job we finish in Fairview is covered by the 730-Day Done Right Promise. If it’s not right, we come back and make it right. No fine print, no conditional language. Call (844) 560-0925 to book the estimate.
Get a Free Concrete Estimate in Fairview

Concrete is one of those jobs you only want to do once. Call (844) 560-0925 and we’ll set up a free on-site estimate at your Fairview property, measure the footprint, walk the drainage, and put a written number in your hands with no pressure and no change orders. A live person answers, 24/7. For the wider outdoor scope, our Driveway & Pavers service covers everything that ties into the pour.
Written by the team at Groundwork Construction Co.












