







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt driveways & resurfacing in Highland Park, TX: what it costs and how long it takes
Asphalt driveways & resurfacing in Highland Park, TX typically runs $3,500 – $9,000 for new asphalt paving, and a straightforward full replacement lands between $5,000 and $14,000 depending on access, base condition, and how much of the old surface has to come out first. Most of these projects take two to four working days from demo to the day you can park on it, plus a short curing window before heavier vehicles. Call (844) 560-0925 and we’ll quote your specific driveway – the on-site estimate is free.

How a Highland Park asphalt job actually runs, day by day

Asphalt work on a tight, fully built-out lot is a sequencing problem before it’s a paving problem. Highland Park alleys and side streets off Beverly and Armstrong leave almost no room for a dump truck and a roller to pass each other, so how the job is scheduled matters as much as how it’s poured. Here’s what we walk you through:
- Day 1 – assessment and demo. We strip the existing surface and inspect the base beneath it. On century-old lots this is the moment of truth: soft spots, tree root intrusion, or old gravel base that has to be recompacted or replaced. You’ll decide at this stage whether to patch and cap or take it down to the base.
- Day 1 – 2 – grading and base prep. We re-grade for drainage and shape the sub-base with crushed stone, then compact it in lifts. This is where impervious-cover limits and how the water leaves your lot come into play. If the driveway ties into a garage slab or alley apron, we set the grades now, not later.
- Day 2 – 3 – paving and rolling. Hot-mix asphalt goes down in one or more lifts and gets rolled while it’s workable. Fine-grain mixes give a cleaner finish; coarser mixes hold up better under heavy loads. You’ll choose the lift thickness and mix here, and that choice is a big part of the price.
- Day 3 – 4 – edges, transitions, cleanup. We finish the edges, tie into aprons and thresholds, clean the site, and stage material out before the roller leaves. This is when we confirm the finished grade actually sheds water where you want it to.
- After curing – the return visit. Asphalt keeps firming up for days to weeks. We flag when you can walk on it, when you can park on it, and when the surface is ready for seal coat. Sealing itself is a separate line item and a separate job from the paving you just had done.
You’ll make three real decisions across the job: repair-and-cap versus full replacement, base depth and mix, and how the finished grade ties into your garage, alley apron, or street. Each one shows up in the written estimate before you commit, so there are no surprises mid-project. Our technicians have up to 12 years of experience on this kind of work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that shape your new asphalt surface
Most homeowners land on a few real options. Here’s the honest read on each:
- Full replacement vs. resurfacing. A full tear-out and repave gives you a fresh base and a driveway that lasts, at the higher end of the range. Resurfacing over a sound base costs less but only works if the base is holding – if it isn’t, the overlay fails early. We test before we recommend.
- Lift thickness and mix grade. Standard residential asphalt is fine for cars; heavier mixes and thicker lifts cost more but suit trucks, trailers, and heavier traffic. Ask for the mix spec in writing.
- Drainage and grade. On flat or sloping Highland Park lots, getting water away from the garage and foundation can drive the price more than the asphalt itself. A properly graded base is a safety net against foundation and flooding problems later.
- Edging and transitions. Clean concrete or stone edging holds the asphalt edge together and keeps the driveway looking sharp. It’s a modest add that pays back over the years.
- Aprons and alley tie-ins. How the driveway meets the alley or street affects both cost and how the town reviews your project. We handle the grade at that transition carefully.
The one thing we’d steer you away from is choosing asphalt purely on lowest price – a thin base and thin lift is a resurfacing bill waiting to happen in two or three years.
What asphalt driveways & resurfacing cost in Highland Park, TX

For Highland Park, the working range is $3,500 – $9,000 for new asphalt paving, $5,000 – $14,000 for a full driveway replacement, and $250 – $700 for a seal coat done as a separate maintenance job. What pushes a job toward the top of that range:
- Size and length. A long alley-access run off a lot like your typical Highland Park side street uses more tonnage and more time than a short front-entry drive.
- Base condition. Soft spots, tree roots, or a failing gravel base mean excavation and recompaction, which adds cost fast.
- Access and staging. Limited room for equipment on tight, fully built-out lots means careful scheduling and sometimes smaller loads – a real line item, not overhead.
- Drainage work. Re-grading or adding drainage to protect the foundation adds cost but prevents bigger bills down the road.
- Edging, aprons, and tie-ins. Custom transitions and edging are modest adds that make the finished job last.
Your written estimate lists demo, base prep, tonnage and mix, edging, cleanup, and disposal line by line. What it won’t include unless we flag it: major drainage rerouting, retaining or replacing a failing base, and any work the town requires after review. Call (844) 560-0925 for an exact quote – estimates are free and there’s no change-order guessing once we start.
See the difference
Before
After
Before
After
Before
AfterWhy Highland Park homes make this a different job
Highland Park administers its own municipal plan review, zoning, and permitting rather than running on Dallas codes despite being entirely surrounded by Dallas. That means your asphalt project is reviewed against the town’s own lot-coverage and impervious-cover limits, and on lots with mature trees the tree-preservation rules can force a re-survey before any equipment moves. We plan for that review up front rather than discovering it mid-job.

The housing stock reinforces it. These are mostly 1910s – 1930s Tudor, Colonial, Mediterranean, and Prairie homes on tight lots, often with teardown-rebuilds and additions going up around them. Century-old pier-and-beam foundations and older garages mean driveways tie into structures that have already moved. Add North Texas expansive clay that swells and shrinks with wet-dry cycles, and the base under your asphalt is doing more work than the asphalt itself – which is why we over-build the base rather than pour over a bad one. If your project is part of a full Driveway & Pavers in Highland Park plan, we coordinate the asphalt with the rest of the hardscape so one crew doesn’t undo the other.
Asphalt driveways & resurfacing questions we hear in Highland Park

How long does an asphalt driveway take in Highland Park?
Most asphalt driveways in Highland Park take two to four working days from demo to final cleanup, then a short curing window before you park on it. Tight-lot access off streets like Beverly or Armstrong can stretch the schedule slightly because equipment moves are slower. Call (844) 560-0925 and we’ll give you a firm timeline for your address – estimates are free.
Do I need a permit for asphalt work in Highland Park?
Often yes, because the Town of Highland Park runs its own permitting and review, and driveway work that touches impervious cover or drainage usually requires a review. We pull the permits and handle the inspections as part of the job, so you’re not chasing the town yourself. Call (844) 560-0925 to talk through your project.
Can you resurface without tearing out the whole driveway?
Sometimes, but only if the base underneath is sound and the existing surface is stable. If it isn’t, a resurfacing job fails early and costs you more than doing it right the first time. We test the base before we recommend one path or the other. Call (844) 560-0925 for a free assessment.
What does asphalt driveways & resurfacing cost in Highland Park?
New asphalt paving runs $3,500 – $9,000, a full replacement $5,000 – $14,000, and a seal coat $250 – $700. The variables that matter most are size, base condition, access, drainage, and edging. Call (844) 560-0925 for an exact written quote – it’s free and line-itemed.
Is the work backed by a warranty?
Yes – every asphalt job we do is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s backed in writing and it’s one of the longest workmanship guarantees in the residential construction space. Calls are answered by a live person around the clock. Call (844) 560-0925 to book your estimate.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Get a free asphalt estimate for your Highland Park driveway
We’ll come to your property, walk the existing driveway and base, and give you a written, line-itemed estimate for asphalt driveways & resurfacing in Highland Park at no charge. Call (844) 560-0925 and a live person picks up – we’ll ask about your lot access, your timeline, and what’s under the surface so the quote you get is the number you pay. If your project is part of a bigger plan, homeowners often pair this with Chain Link Fence in Highland Park or ADU Site Prep & Utilities in Highland Park, and we’ll scope it all in one visit. For the full wide-angle on our Driveway & Pavers work, or to see how we handle an asphalt-only job, call today.
Written by the team at Groundwork Construction Co.












