







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Dallas, TX: What It Costs and How Long It Takes
Asphalt driveway paving in Dallas typically runs $3,500 – $9,000, and a full resurfacing (overlay) usually lands between $2,000 and $5,500 depending on square footage and how much base repair is needed. Most residential driveways take two to three working days from tear-out to a drivable surface, with a short cure window before you park on it. Call (844) 560-0925 and we’ll walk your driveway, measure it, and put a line-item number in writing – free, no pressure.

How We Take a Dallas Asphalt Driveway From Torn-Up to Drivable

The sequence below is the real one, not a sales outline. Here’s what actually happens and what you’ll be deciding along the way.
Day 1, morning: tear-out and base inspection
We strip the old surface down to the base and get a look at what’s underneath – which matters more in Dallas than most people expect, because the clay under your driveway tells us whether a simple overlay will hold or whether the base needs reworking. This is usually a two-to-four-hour job on a standard residential drive. You’ll decide at this point whether we’re resurfacing or doing a full replacement, because the base inspection is what settles that question honestly. If the base is sound and the subgrade is stable, resurfacing saves you real money. If it’s not, a resurfacing that fails in a year is the more expensive choice.
Day 1, afternoon: grading, drainage, and base correction
We re-grade for positive drainage away from the house and correct soft spots in the base. Dallas’s expansive clay moves, and a driveway that puddles after rain is a driveway that will fail early. On most jobs this is the second half of day one. This is also where we set the final slope so water runs to the street or a drain rather than toward your slab.
Day 2: hot-mix asphalt placement
Fresh hot-mix goes down in lifts, raked and screeded to grade, then compacted with a roller in multiple passes. Compaction is the whole ballgame – a driveway rolled properly will outlast one that just got smoothed over. We’re using hot-mix because it’s what holds up to Dallas heat and traffic. Placement and rolling on a typical two-car driveway runs most of a full day. You’ll decide the finish thickness here if you haven’t already – 2 inches is standard for resurfacing, 3 inches or more for a new full-depth pour.
Day 2 – 3: edges, transitions, and cleanup
We finish the apron at the street, tie in any sidewalk or garage approach, clean the joints, and sweep the site. Any widening, curbing, or edge restraint goes in during this window. This is where a driveway either looks finished or looks patched, so we don’t rush it. You’ll be walking the job with us before we pack up.
After: the cure window
Asphalt needs to cool and set before regular traffic. We keep cars off for a short cure period and keep heavy loads off longer, and we tell you exactly when each is fine. We’ll also flag the first hot week – freshly laid asphalt can soften slightly in direct summer sun while it’s still curing, which is normal and not a defect.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Dallas Asphalt Job
Most of the real decisions on an asphalt driveway come down to four of these. Here’s the honest trade-off on each.
- Resurface (overlay) vs. full replacement: An overlay is cheaper and faster and works great when the base is solid – call it $2,000 – $5,500 for a typical drive. A full replacement ($3,500 – $9,000) is the right call when the base is failing or the old surface is deeply cracked. The trade-off is up-front cost against how many years you get before you’re back here.
- Hot-mix vs. cold-patch: Hot-mix is what we use on real driveways – it compacts and binds properly and holds up to Dallas heat. Cold-patch is a temporary fill you use to get through a season, not a finished surface. Skip it if you want the driveway to last.
- Thickness and base depth: A 2-inch overlay over a sound base suits a maintenance resurface. A 3-inch-plus full-depth pour with a compacted aggregate base is what you want on a new or heavily loaded driveway, and it costs more because of the material and the excavation. It’s the difference between a driveway that lasts and one that cracks in the first hard freeze.
- Drainage and edge detail: Proper slope, a defined edge, and curbing where the drive meets landscaping keep water out of the base. This is where a lot of cheap jobs cut corners, and it’s exactly why they puddle and fail. Budget for it up front.
- Sealcoat timing: Fresh asphalt shouldn’t be sealed immediately – it needs to cure first. We’ll tell you when, and we keep sealing as its own separate, smaller job so you’re not paying for it inside a paving quote that doesn’t need it.
What Asphalt Driveways & Resurfacing Costs in Dallas, TX
Resurfacing in Dallas generally runs $2,000 – $5,500, and a full asphalt driveway paving job runs $3,500 – $9,000. A full driveway replacement – tear-out plus new base and surface – is $5,000 – $14,000. Sealing, when it’s time, is $250 – $700. Those ranges are real, and they hold because they’re anchored to square footage, base condition, and access. Here’s what actually moves the number:

- Size: Square footage is the biggest single driver. A single-car drive and a long two-car drive are not the same job.
- Existing condition: A sound base supports an overlay; a failing base means tear-out, re-grading, and new aggregate – the jump from resurfacing to replacement pricing.
- Base and subgrade work: Dallas clay doesn’t sit still, so soft spots and drainage correction add cost. We’d rather fix it than pave over it.
- Access and haul-off: Tight lots, gates, and long hauls for old material add labor and disposal.
- Drainage and edge detail: Curbs, drains, and transitions to garage or sidewalk are real line items, not freebies.
Your written estimate will itemize tear-out, base work, material and thickness, drainage, and cleanup, and it holds – upfront pricing, no surprises. What it won’t include is anything we haven’t scoped, like a surprise utility line or a landscaping repair you ask for mid-job; we bring those to you before we touch them. Call (844) 560-0925 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas Homes Specifically Do to an Asphalt Driveway
Dallas construction is defined by expansive black-clay soil that swells and shrinks with the wet-dry cycle, and your driveway sits right on top of it. After a dry Texas summer the clay shrinks and cracks open, then the fall rains swell it back – which is why driveway cracking and heaving show up in clusters here, and why the base inspection on day one matters so much. The housing stock makes it interesting too: 1920s – 40s pier-and-beam bungalows in East Dallas and Oak Cliff sit blocks from 1950s – 70s shallow-slab ranch homes and a steady wave of infill townhomes, so within one neighborhood we’re paving next to wildly different ground conditions. When we work in the 75379 – 75382 ZIPs, we plan drainage and base depth around that reality rather than paving blind. If the driveway is part of a bigger project, the wider scope lives on our Driveway & Pavers in Dallas page, and homeowners often pair this with Chain Link Fence in Dallas when they’re redoing the front of the property at the same time. We handle Dallas and the surrounding neighborhoods, including Highland Park and University Park.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in Dallas

Most residential asphalt driveways take two to three working days from tear-out to drivable surface, plus a short cure window before regular traffic. A resurface is often quicker than a full replacement because there’s less base work. Call (844) 560-0925 and we’ll give you a realistic timeline for your specific driveway.
It depends on whether you’re changing the footprint or the street apron, since work that touches the right-of-way or alters drainage can trigger a permit and inspection. A straight resurface in the same footprint usually doesn’t. We’ll tell you up front what your job needs and pull any required permits before work starts – no guesswork left to you.
Yes, if the base is sound and the existing surface is still mostly intact. The day-one base inspection is what decides it – a failing base means a resurface won’t last, and we’ll say so. Call (844) 560-0925 for a free estimate and an honest answer on which path is right for your driveway.
Resurfacing in Dallas generally runs $2,000 – $5,500, while a full asphalt driveway paving job is $3,500 – $9,000 and a full replacement is $5,000 – $14,000. Size, base condition, and drainage detail move the number. Call (844) 560-0925 for an exact line-item quote – estimates are free.
Every asphalt driveway we pave is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (844) 560-0925 to schedule your free estimate and see it.
Get a Free Asphalt Driveway Estimate in Dallas
If your Dallas driveway is cracked, puddling, or just past its prime, the next step is a free on-site estimate. Call (844) 560-0925 – a live person answers, any hour. We’ll measure the drive, check the base, and hand you a written line-item quote with upfront pricing, so you know exactly what you’re paying before anything gets torn up. No pressure, no surprises.
Written by the team at Groundwork Construction Co.












