







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Highland Park, TX: What the Job Actually Involves
Door installation in Highland Park runs $1,200 to $6,500 for a single entry or interior door, and $8,000 to $20,000+ when you’re replacing a carriage-house door, a set of French doors, or a full run of custom wood doors on a 1920s Tudor. Most single-door installs take one day; a custom wood entry with new framing, finish matching, and hardware can run three to five days. Call (844) 560-0925 and we’ll set a free on-site estimate so you’re pricing a real number, not a guess.

How a Door Installation Comes Together, Stage by Stage

Doors in Highland Park homes rarely go in like doors anywhere else. The house is usually 90 to 110 years old, the opening isn’t square, and the trim has to match something a millwork shop cut decades ago. Here’s the sequence we actually run.
1. Site measure and opening assessment (day 1, 1 – 2 hours)
We measure the rough opening in three places top, middle, and bottom, because a century-old pier-and-beam frame has moved. We check the header, the jack studs, and whether the existing threshold sits level. You decide at this stage whether we’re matching the existing trim profile or replacing it.
2. Material and hardware selection (day 1 – 3)
This is your heaviest decision point. Solid wood versus engineered core, paint-grade versus stain-grade, and the hardware finish all get locked here. We bring samples so you’re choosing against the actual light in your foyer, not a catalog photo.
3. Demo and prep (day 1 of install, 2 – 4 hours)
Old door and trim come out, and we inspect what’s behind them. In Highland Park that often means finding shims from a previous remodel, a rotted sill, or a header that needs sistering. If structural repair is needed, you get a written change order before we proceed.
4. Set, shim, and seal (same day, 2 – 3 hours)
The door gets set plumb, shimmed at the hinges and strike side, and checked for swing and latch. We foam and seal the perimeter, then verify weatherstripping contact along all four sides.
5. Trim, finish, and final walkthrough (day 2 – 5)
Casing, hardware, and finish go on last. You walk the door with us, checking operation, latch alignment, and finish. The work is covered by our 730-Day Done Right Promise, so if something settles or sticks six months in, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Solid wood vs. engineered core: Solid wood (oak, mahogany, knotty alder) matches the character of a 1920s Colonial or Tudor and takes stain beautifully, but it’s heavier, needs seasonal adjustment, and costs more. Engineered core is more stable in North Texas humidity swings and cheaper, but it won’t match historic detailing as convincingly.
- Paint-grade vs. stain-grade: Paint-grade MDF or poplar runs less and hides minor imperfections. Stain-grade hardwood shows grain and costs more, and it’s what most Highland Park restorations call for.
- Carriage-house and garage-entry doors: These are a signature Highland Park choice. Custom wood carriage doors with matching hardware run $4,000 to $12,000+ installed, and they need precision fitting because the tolerances are tighter than a standard overhead door.
- Smart locks and integrated hardware: Keypad and app-controlled locks are common on premium entries. We coordinate the wiring and finish so the hardware looks original, not bolted on.
- Prehung vs. slab: Prehung is faster and cheaper; slab replacement lets you keep original casing and is the right call when the trim is historic.
What Door Installation Costs in Highland Park, TX
Entry and interior door installation in Highland Park runs $1,200 to $6,500 for a standard unit; custom wood entries, French doors, and carriage-house doors land at $8,000 to $20,000+. Four things push the number up or down:
- Door size and type: A standard 36-inch interior door sits at the low end. Oversized, arched, or paired doors move up fast.
- Existing opening condition: Square, sound framing keeps the job simple. Rotted sills, a sagging header, or a pier-and-beam frame that’s shifted adds structural repair.
- Trim and finish matching: If the casing has to be replicated to match a 1925 profile, expect millwork and finish labor to add 20 – 40%.
- Permit scope: A simple like-for-like swap usually needs no permit. Changing the opening size or adding a new opening triggers Town of Highland Park plan review.
Your written estimate itemizes the door, hardware, trim, labor, and any structural repair. What it won’t include unless we flag it: paint touch-up beyond the door itself, or landscape repair if we have to stage materials through a tight alley lot.

See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Specifically Do to This Job
Highland Park is its own permitting jurisdiction. The town administers its own plan review, inspections, and design review rather than deferring to Dallas codes, and it’s stricter than most of North Texas on lot coverage and impervious cover. That matters for door installation because a new opening, an enlarged carriage-house door, or an addition that relocates an entry can trigger plan review and design scrutiny before anyone touches the wall. The town’s tree-preservation rules add another layer: on alley-accessed lots off Beverly and Armstrong, there’s almost no room to stage a door crate, so we sequence deliveries tightly and don’t leave materials blocking the alley.
The housing stock drives the work. Most of what we see is 1910s – 1930s Tudor, Colonial, Mediterranean, and Prairie homes on tight lots, plus teardown-rebuilds and large additions. Century-old framing and pier-and-beam foundations mean openings are rarely square, and North Texas expansive clay soils keep those foundations moving. We check for that before we set a door, because a door that’s plumb today can stick next spring if the frame is shifting. If your project is part of a full Windows & Doors in Highland Park scope, we coordinate the door schedule with the rest of the exterior work.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Highland Park

A standard single-door installation takes one day; custom wood entries and carriage-house doors run three to five days once materials are in. Call (844) 560-0925 for a timeline specific to your opening.
A like-for-like swap usually doesn’t require a permit, but a new opening or a size change does, and the Town of Highland Park runs its own plan review. We pull the permit and pass inspection as part of the job.
Usually yes, a straight replacement stays inside the existing opening. If the header is compromised or you want a wider opening, that’s structural work and we’ll scope it in writing before starting.
Standard units run $1,200 to $6,500 installed; custom wood and carriage-house doors run $8,000 to $20,000+. Call (844) 560-0925 for an exact quote, and estimates are free.
Every door installation is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right, and you get it in writing.
Homeowners often pair a new entry with Cabinets & Countertops in Highland Park during a larger renovation, and a Garage Conversion ADU in Highland Park often calls for matching doors on the new structure. Our Windows & Doors service covers the full exterior scope, and we work throughout Highland Park and the surrounding area.
Get a Free On-Site Door Installation Estimate in Highland Park
We’ll come out, measure the opening, and give you a written line-item quote with the door, hardware, trim, and labor spelled out. No surprises, no change orders unless we find something structural and you approve it first. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Call (844) 560-0925 to schedule your free estimate. A live person answers around the clock.
Written by the team at Groundwork Construction Co.












