







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveway Paving and Resurfacing in University Park, TX
Asphalt driveway paving in University Park typically runs $3,500 to $9,000 for a new installation, and resurfacing an existing drive usually lands in the lower half of that range. Most drives here are done in two to three days once the base is ready, with a short cure before you park on it. Call (844) 560-0925 for a free on-site estimate.

How we handle asphalt driveways and resurfacing, start to finish

Asphalt is a sequenced job, and the order matters as much as the material. Here’s what actually happens from day one.
Day 1: Layout and demo
We walk the drive with you and mark the edges, slope and any tie-ins to the garage slab or street apron. Old asphalt, broken concrete or failing base gets removed and hauled off. Because University Park lots are tight, we plan dumpster and equipment placement around your side-yard clearance and street parking before we start, not after. You confirm the final footprint and finish at this stage.
Day 1-2: Base prep and grading
This is where an asphalt drive lives or dies. We grade for drainage away from the garage and house, then compact a crushed-stone base in lifts. On the blackland clay common around 75225, proper base depth and compaction is the difference between a drive that lasts and one that cracks in two summers. You’ll see the base before anything goes on top of it.
Day 2: Paving
Hot asphalt is laid, raked to the final grade and rolled while it’s still workable. Edges get shaped and compacted. You decide at this point whether you want a plain finish or a slightly heavier surface course. The drive looks finished but isn’t ready to drive on yet.
Day 3 and beyond: Cure and walkthrough
Fresh asphalt needs to set. We walk the finished drive with you, explain the cure window before you park on it, and confirm the drainage lines up with what we planned. Any touch-ups get noted on the spot and scheduled. Your workmanship is covered under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Asphalt isn’t one product. These are the decisions that shape both the look and the number:
- New installation vs. resurfacing. A full tear-out and rebuild costs more but fixes a failing base. Resurfacing (an overlay) is faster and cheaper, but only works if the existing base is sound and the cracks are surface-level, not structural.
- Base depth and stone grade. A heavier compacted base handles North Texas clay movement better; it’s the single biggest driver of longevity and adds to the price.
- Surface course thickness. A standard course is fine for most residential drives. A heavier lift holds up better under repeated loads and hot summers.
- Drainage and slope. Getting water to sheet away from the garage and foundation is non-negotiable on a tight lot. Adding a channel drain or adjusting grade is a real line item.
- Edge treatment. Clean asphalt edges or a bordered edge; the border looks sharper and keeps the asphalt from raveling at the perimeter.
If your project grows into a wider hardscape, our Driveway & Pavers in University Park page covers the full scope, and homeowners often pair an asphalt drive with Chain Link Fence in University Park along a side yard.
What asphalt driveways and resurfacing cost in University Park, TX
Expect $3,500 to $9,000 for a new asphalt driveway in University Park, and roughly $250 to $700 for a seal coat refresh. Where you land depends on five things:

- Size and footprint. A short single-car drive sits at the low end; a long double drive pushes the top.
- Existing condition. Sound base means resurfacing; failed base means tear-out and rebuild, which adds cost.
- Base and drainage work. Regrading, added base depth or a channel drain moves the number up.
- Access. Tight side yards and street staging on a narrow lot take more coordination and time.
- Surface and edge finish. A heavier course and finished edges cost more than a plain lay.
Your written estimate breaks out demo, base, paving and cleanup line by line. Upfront pricing, no surprises: the number you see is the number you pay, with 0% financing for 18 months and $1,000 off projects over $10,000 available. What’s not included by default is any repair to the garage slab or foundation beneath the drive, which we quote separately if we find an issue.
See the difference
Before
After
Before
After
Before
AfterWhat University Park homes do to this job
University Park is a built-out, landlocked Park Cities enclave where building happens by tear-down and rebuild, not new subdivision work. That shapes asphalt work here directly. On the 50- and 60-foot-wide lots common in 75225, side yards are often near zero-lot-line tight, so staging, dumpster placement and equipment access routinely spill onto the street and need coordination with the town. Many drives we work on sit between occupied million-dollar homes and a rebuild next door, so timing and cleanup matter. The blackland clay under this ZIP expands and contracts with wet-dry cycles, which is why base prep gets real attention here rather than a quick skim. Most homes we see are 1920s-1950s brick and Tudor cottages or newer custom builds on the same narrow lots, and the failure we run into most is a drive that cracked because the base gave way under the clay, not because the asphalt wore out. We cover all of University Park, and if your plans include a back structure, our ADU Site Prep & Utilities in University Park work often runs alongside drive access planning.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Asphalt Driveways & Resurfacing in University Park

A typical asphalt drive here takes two to three days from demo to finished surface, plus a short cure before you drive on it. Tight lots and street staging can add a day. Call (844) 560-0925 for a timeline on your specific drive.
Whether a permit is required depends on your project, and we confirm the current town requirements before work starts. Anything touching the street apron or right-of-way gets checked first. Call (844) 560-0925 and we’ll walk you through what applies to your lot.
Only if the existing base is sound; if the cracks are structural, an overlay won’t last. We check the base during the estimate and tell you honestly which path makes sense. Call (844) 560-0925 for a free assessment.
New asphalt paving runs $3,500 to $9,000, resurfacing sits toward the lower end, and a seal coat is $250 to $700. Size, base condition and access drive the number. Call (844) 560-0925 for an exact quote; estimates are free.
Every job is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, not damage from later digging or vehicle loads. Call (844) 560-0925 with any warranty question.
Get a free asphalt driveway estimate in University Park
We’ll come out, check your base and drainage, and hand you a written line-item estimate for asphalt driveways and resurfacing in University Park, with financing and current offers spelled out. Call (844) 560-0925 and a live person answers, any hour, any day. Our technicians have up to 12 years of experience and arrive background-checked and in uniform.
Written by the team at Groundwork Construction Co.












