







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Farmers Branch, TX: What It Costs and How Long It Takes
A chain link fence in Farmers Branch, TX typically runs $3,500 to $9,000 for a standard residential lot, and most installs are finished in one to three days once the layout is set and utilities are marked. That range covers galvanized or vinyl-coated chain link with posts, rails, gates and a tensioned fabric run. Call (844) 560-0925 with your lot size and we’ll put a real number in writing, not a ballpark over the phone.

Key takeaways:
- Chain link is the cheapest way to fully enclose a Farmers Branch yard, usually far below wood or vinyl for the same footage.
- Most residential jobs here land in the $3,500 – $9,000 range; a small side-yard enclosure can come in lower, a full half-acre with two gates sits at the top.
- The variables that move price are total linear feet, gate count and width, height (4 ft vs 6 ft), coating, and whether we’re pulling old fence and concrete.
- Permits and inspections in ZIP 75234 are handled through the City of Farmers Branch process, and we manage that paperwork for you.
How we build a chain link fence here, stage by stage

A chain link fence looks simple from the street. It still has a real sequence, and skipping a step is why fences lean or sag within a couple of seasons. Here’s the order we work in and where you make decisions.
Stage 1 – On-site measure and layout (about an hour). We walk the property line with you, confirm what’s getting enclosed (whole yard, a dog run, a pool barrier, a side gate for the trash cans), and stake the posts. This is where you decide height and gate placement, and it’s the meeting that sets the price. If there’s an existing fence, we note what has to come out and whether the posts are set in concrete.
Stage 2 – Utility marking and permitting (one to five business days). Before anyone digs a post hole, we call for underground utility locating so we don’t hit a gas line, irrigation run or buried electrical in a Farmers Branch backyard. If the scope needs a permit, that goes to the City of Farmers Branch now, not after the holes are dug. You don’t have to chase the inspection; we schedule it.
Stage 3 – Demo and prep (half a day to a day). Old fence comes down, and posts set in concrete get pulled and hauled off. On tight infill lots the crew plans staging and alley access up front so we’re not blocking a neighbor’s drive or crushing a tree root zone that matters to you.
Stage 4 – Set posts and stretch fabric (one to two days). Terminal posts at corners and gates get concrete footings sized to the soil and fence height, with line posts set to string line so the top rail is dead straight. The fabric gets stretched and tensioned, and gates get hung and adjusted so they latch cleanly and swing square. This is the bulk of the labor.
Stage 5 – Final walkthrough (about 30 minutes). We walk the whole run with you: tension, gate swing, post plumb, clean site. You sign off, and the fence is covered under our 730-Day Done Right Promise. If something isn’t right later, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on a chain link fence
Chain link has fewer decisions than a wood or vinyl project, but the ones you make matter for how long it lasts in North Texas.
- Galvanized vs vinyl-coated fabric. Bare galvanized is the budget path and holds up fine, but it shows rust streaks over time. Vinyl-coated (black or green most often) costs more per foot and looks cleaner against landscaping. On a lot with mature trees, coated chain link reads less like a kennel and more like a fence.
- Height: 4 ft vs 6 ft. Four-foot is enough to mark a boundary and keep a dog in on a calm street. Six-foot is the norm for privacy-adjacent enclosures and pool barriers, and it costs more because of taller posts, more fabric and deeper footings.
- Post gauge and diameter. Heavier-gauge posts resist bending and stay straight through clay soil movement. The cheap version is thin-wall tubing that kinks if a car backs into it.
- Gate style and width. A standard walk gate vs a double swing gate for a truck or trailer changes hardware and price. If you’ll drive through to a detached garage or alley, plan the gate width now, not later.
- Top rail and tension wire. A top rail keeps the fabric from sagging under weight. For taller runs, a tension wire at the bottom holds the fabric straight to the ground.
- Barbed or privacy slats. Slats add privacy to a chain link run at a modest cost; barbed top is usually only for commercial or utility applications.
Because this is often part of a full Fence Installation in Farmers Branch project, we can mix materials. Plenty of homeowners run chain link along the back property line where it’s unseen and put a different fence along the street-facing side.
What a chain link fence costs in Farmers Branch, TX
The typical Farmers Branch chain link job lands between $3,500 and $9,000. A small side-yard enclosure can come in under that; a full lot with two gates and a demo sits at the top or slightly above. Here’s roughly how the money splits:
| Line item | Typical range |
|---|---|
| Fabric and posts (per linear foot) | $15 – $28 |
| Walk gate (3 – 4 ft) | $250 – $600 each |
| Double drive gate | $600 – $1,400 |
| Old fence removal and haul-off | $300 – $900 |
| Concrete post footings | Included in most quotes |
| Permit (if required) | Varies by scope |
What pushes a job to the low end: a straight, square lot with clear access, no demo, and a single walk gate. What pushes it to the high end: lots of corners and jogs, a double drive gate, a sloped or heavily landscaped property line, old posts stuck in concrete, and heavier post gauge. Trees and roots slow the crew down on the older streets more than most people expect.

Every written estimate from us is line-itemized: footage, gates, hardware, demo and permit. The number you see is the number you pay. No change orders after we start because we “found something.” Our Fence Installation service runs on this same upfront-pricing approach.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch lots and soils do to chain link work
Farmers Branch is basically built out, which shapes how fence work goes here. Most of the yards we work in are in the established post-war subdivisions off the 75234 core, where the original one-story ranches sit on modest lots and neighbors on both sides are often living beside an active demo-and-rebuild. That means tight-lot staging, alley access, and tree protection are routine parts of the job, not afterthoughts. Contractors who only build in new suburbs aren’t used to squeezing a crew and materials into a fifty-foot lot between two houses.
The soil matters just as much. North Texas black clay swells when it’s wet and shrinks when it dries, and that movement is the quiet enemy of every fence post. We set footings deep enough and size the concrete right so a chain link run doesn’t tilt or pull out of plumb after a wet spring and a dry summer. And on the older properties, the original pier-and-beam remnants and dated utility runs mean the utility-locate step before digging isn’t a formality – it’s how we avoid cutting an old irrigation line nobody remembered was there.
We handle fence work across Farmers Branch and the surrounding streets, and we know the City of Farmers Branch permitting and inspection process for fence scope. If your project also involves utility trenching for a backyard structure, homeowners often pair this with ADU Site Prep & Utilities in Farmers Branch so the digging happens once.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Farmers Branch

Most residential chain link fences take one to three days on site once the layout is set, plus a few business days if a utility locate or permit inspection is needed before digging. A simple straight run can wrap up in a single day. Call (844) 560-0925 with your lot size and we’ll tell you the real window.
Whether a permit is required depends on the fence height, location, and whether it’s a pool barrier, and we confirm that through the City of Farmers Branch before we dig. We handle the permit and inspection if one applies, so you’re not chasing paperwork. Call (844) 560-0925 and we’ll tell you what your specific fence needs.
Yes. We call for underground utility locating before any digging, and we route posts to avoid irrigation and buried lines wherever the layout allows. On tight lots we plan staging so heavy equipment doesn’t churn up the grass. If a line has to be rerouted, we flag it in the estimate, not mid-job.
A typical residential chain link fence in Farmers Branch costs $3,500 to $9,000 depending on footage, height, gate count and whether we’re removing an old fence. Small side-yard enclosures come in lower; full lots with drive gates sit at the top. Call (844) 560-0925 for an exact quote – estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on posts, gates and tension. Call (844) 560-0925 and we’ll walk you through what’s covered before you commit.
If you’re also replacing exterior doors while the fence goes in, homeowners often pair this with Door Installation in Farmers Branch so we handle the exterior envelope in one visit.
Get a written chain link fence estimate in Farmers Branch
Call (844) 560-0925 to schedule a free on-site estimate for a chain link fence in Farmers Branch. A live person answers around the clock, and on the visit we measure the property line, confirm gate placement and height, and hand you a line-itemized written quote with permits and demo spelled out. No pressure, no vague “it depends” number. Upfront pricing, backed in writing.
Written by the team at Groundwork Construction Co.












