







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Highland Park, TX: What the Job Actually Costs and Involves
A paver driveway in Highland Park, TX runs $7,000 – $18,000 for a typical residential drive, and most projects take seven to twelve working days from demo to final compaction. The job means tearing out the old surface, building a properly compacted base over North Texas clay, setting the pavers on a sand bed, and cutting in the edges and transitions. Call (844) 560-0925 and we’ll walk your drive and put a written number in front of you.

From First Cut to Final Compaction: How We Build a Paver Driveway

The sequence matters more than any single material choice, especially on Highland Park’s tight lots where there’s nowhere to stage a pallet of pavers while the base is being built. Here’s the order of operations we follow, and what you’ll be deciding at each stage.
Day 1: Demolition and protection
We pull the old concrete, asphalt, or existing pavers and haul it out the same day, usually four to six hours on a standard two-car drive. Before the first swing, we photograph and protect the lawn edge, the alley approach, and any adjacent hardscape. You’ll confirm the demo limits and where the dumpster sits, because on a Highland Park lot that’s often the single biggest logistical decision of the project.
Days 2 – 3: Excavation and base build
We excavate to a depth set by your paver thickness plus base plus bedding, then lay and compact the aggregate base in lifts, checking grade every pass. This is the stage that decides whether your driveway is still flat in five years or rutted where the clay moved beneath it. You’ll pick base depth during the estimate, and it’s the variable we refuse to shortcut.
Days 4 – 6: Setting, cutting, and pattern work
Bedding sand goes down, pavers get laid, and the field is cut at every transition: aprons, walkway tie-ins, expansion joints against the garage slab. A decorative border or a herringbone field takes longer than a running bond, and you’ll lock in the pattern before we order material, not after it lands.
Days 7 – 9: Edging, compaction, and polymeric joint sand
Edge restraint is set in concrete along the open sides, the field gets plate-compacted, and polymeric sand is swept and activated into the joints. That sand is what stops weeds and keeps the pavers from walking, and it needs a dry window to cure.
Final walkthrough and handoff
We walk the finished drive with you, note any settlement or joint issues, and hand over care instructions. Within days of the driveway being done, many homeowners turn to the front of the house and start planning Door Installation in Highland Park so the entry matches the new paving.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Most of the decisions on a Highland Park paver driveway come down to five or six real choices. Here’s the honest trade-off on each.
- Concrete pavers: the value and durability standard, roughly $7 – $12 per square foot installed, with a color range that runs from plain gray to tumbled stone-look. They hold up to North Texas freeze-thaw and hail better than most people expect, and a chipped paver can be swapped individually. This is what we recommend for most drives.
- Clay brick pavers: the choice that matches Highland Park’s Tudor and Colonial stock, with a color depth concrete can’t match. Higher cost and more careful installation, but the look is right for the architecture and it ages gracefully.
- Travertine and stone: a premium surface for the home that’s going to be seen from a circular drive. Beautiful, but softer against dropped weight and the wrong pick for a household with heavy trucks.
- Permeable systems: open-joint pavers over a graded base that lets water through. Worth considering where lot-coverage and drainage limits are tight, and they cost more than a standard base.
- Pattern and border: herringbone reads traditional, running bond reads clean and modern, and a soldier-course border frames the whole thing. Borders add cost but finish the edge.
If your project grows into a full Driveway & Pavers in Highland Park plan, we’ll price the whole scope together so the material order and the base work line up.

What Paver Driveways Cost in Highland Park, TX

The installed range is $7,000 – $18,000, and the number that lands on your estimate depends on a handful of variables we can measure on site.
- Square footage: a single-car drive sits near the bottom of the range; a wide three-car with an apron and turnaround pushes toward the top.
- Removal and haul-off: old concrete demo and disposal adds cost that a bare lot doesn’t carry.
- Base depth and soil prep: expansive clay may need deeper excavation, geotextile, or over-excavation and replacement before compaction.
- Material grade: concrete pavers sit at the low end, clay brick and travertine at the high end.
- Access and staging: alley-accessed lots with no room for equipment or pallet drops take longer and cost more in labor.
A written estimate itemizes demo, base, bedding, pavers, edging, polymeric sand, and haul-off, with the square footage and paver type spelled out. What it typically doesn’t cover: unforeseen utility relocation, foundation work on an adjacent structure, or landscape repair beyond basic sod at the edges. Upfront pricing means the number you see is the number you pay, and projects over $10,000 take $1,000 off with 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhy Paver Driveways Behave Differently in Highland Park
Highland Park runs its own municipal plan review, zoning, and permitting rather than answering to Dallas codes, even though Dallas surrounds it entirely. That matters for a driveway: the town’s lot-coverage and impervious-cover limits can cap how much new hardscape you’re allowed to add, and those limits get checked before a shovel goes in. Nearly every project here is a remodel, addition, or teardown-rebuild on a fully built-out lot, so neighbor scrutiny and design review are part of the deal. The housing stock is 1910s – 1930s Tudor, Colonial, Mediterranean, and Prairie homes on tight lots, which means the paver detail usually has to read consistent with the architecture. Add North Texas heat, expansive clay that shifts with wet-dry cycles, and spring storm season, and you get drives that settle unevenly if the base wasn’t built right the first time. Alley-accessed lots off streets like Beverly and Armstrong leave almost no staging room, so deliveries and sequencing get managed as tightly as the construction itself. We serve all of Highland Park with this work.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Highland Park

Most paver driveways in Highland Park take seven to twelve working days, depending on size and access. A small drive with clean demo can finish closer to a week, while a large drive with old concrete to remove and difficult alley staging runs longer. Weather and the polymeric sand cure window can extend it. Call (844) 560-0925 for a timeline specific to your drive.
Often yes, because the Town of Highland Park administers its own permits and enforces lot-coverage and impervious-cover limits on new hardscape. Whether your project crosses that threshold depends on the square footage and what’s already paved on the lot. We handle the permit and inspection process as part of the job. Call (844) 560-0925 and we’ll tell you what your project scope likely triggers.
Sometimes, if the existing slab is sound, well-drained, and the height allows a paver layer on top without blocking the garage or drainage. On most Highland Park drives the concrete is cracked or settled, and in that case overlay just transfers the problem upward. We inspect the slab and give you the honest call. Call (844) 560-0925 to schedule the inspection.
Paver driveway installation in Highland Park runs $7,000 – $18,000 installed. Size, material grade, base depth, removal of the old surface, and staging access all move the number. Call (844) 560-0925 for an exact quote – estimates are free, and you get a written line-item breakdown rather than a verbal ballpark.
Every paver driveway we build is covered by the 730-Day Done Right Promise. If the base settles, a joint fails, or the workmanship isn’t right, we make it right for two full years. The pavers themselves also carry the manufacturer’s material warranty. Call (844) 560-0925 to review the details before you sign anything.
Get a Free Paver Driveway Estimate in Highland Park
We’ll walk the drive, check the base and drainage, measure the square footage, and hand you a written itemized estimate at no charge. Our technicians have up to 12 years of experience, calls are answered by a live person 24/7, and the workmanship is covered by the 730-Day Done Right Promise. Call (844) 560-0925 to set up your free estimate, or pair the project with Cabinets & Countertops in Highland Park if the whole house is on the list. For the broader scope, see our Driveway & Pavers service.
Written by the team at Groundwork Construction Co.












