







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in University Park, TX: What You’re Actually Signing Up For
Paver driveways in University Park typically run $7,000 – $18,000 for a standard two-car approach, and most jobs are finished in 4 to 7 working days once materials land. The number that matters more than the price is access: on a 50-foot lot in 75225, the job is won or lost in how you stage it. Call (844) 560-0925 and we’ll walk your driveway and your lot line before anyone quotes a number.

How We Build a Paver Driveway Here, Stage by Stage

The sequence below is what a real paver driveway job looks like on a tight Park Cities lot. Timelines assume normal weather and a driveway in the 400 to 600 square foot range.
Stage 1: Layout, access plan, and demo (day 1)
We mark the excavation limits against the setback line before a single shovel moves, because on these lots the side yard is often three feet and the paver edge has to respect it exactly. Existing concrete or asphalt comes out, and the spoil has to leave the same day or sit in a dumpster on the street. That dumpster placement is a decision you’ll make with us on day one, and it usually requires a call to the town for a right-of-way permit.
Stage 2: Excavation and subgrade (days 1 – 2)
We dig to roughly 9 to 11 inches depending on the paver thickness and base spec, then proof-roll the subgrade. On North Texas blackland clay this is where the job earns its money: the clay moves with every wet-dry cycle, so a driveway built on an unprepared subgrade will heave and settle within a couple of seasons. You’ll decide here whether we go with a standard compacted base or add a geotextile separation layer, which is a modest upcharge that pays for itself on expansive soil.
Stage 3: Base, edge restraint, and bedding (day 2 – 3)
Crushed stone base goes in lifts of about 4 inches, each one plate-compacted and checked for grade. We set the edge restraint in concrete, not spikes, because spike-restrained edges creep on clay. The homeowner decision at this stage is drainage: where the water sheets off the driveway and whether it needs a channel drain at the garage apron. On a lot where the driveway runs straight to a 1920s garage, water management is not optional.
Stage 4: Paver laying, cuts, and compaction (days 3 – 5)
Pavers go down in the pattern you picked, cut tight at the garage apron, the sidewalk, and any radius. We run a plate compactor over the field after laying and again after joint sand. Expect to hear it, and expect your neighbors to as well; that’s the nature of a built-out enclave where houses sit close together.
Stage 5: Joint sand, cleanup, and walkthrough (days 5 – 7)
Polymeric or regular joint sand goes in, the site gets washed down, and we walk the finished driveway with you. Any cut pavers you don’t love get swapped before we leave. That final walk is also when we hand over the material spec sheet and the warranty terms in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Paver Driveway
- Concrete pavers vs. clay brick pavers. Concrete pavers are the workhorse: 2 3/8-inch thickness, molded edges, and a color range from tumbled gray to warm tan. They hold up well to DFW sun and are the lower-cost option. Clay brick pavers cost more but match the Tudor and period revival brick on many University Park homes, which matters if you’re trying to look original rather than new.
- Thickness and traffic. Standard 60mm pavers handle cars and light trucks. If you park a heavy SUV or a boat trailer, 80mm is the honest spec, and it adds to the base depth as well.
- Pattern. Herringbone is the strongest interlock and the most common look here. Running bond and basketweave cost the same to lay but behave differently under turning tires. Herringbone is what we’d recommend for a driveway you plan to keep 30 years.
- Permeable vs. standard. Permeable pavers with open joints and a drainage bed let stormwater infiltrate instead of sheet-flowing to the street. They cost more per square foot and require specific base grading, but they help if your lot floods or the town asks about runoff.
- Color and finish. Tumbled, shot-blast, and smooth finishes all exist. Tumbled hides tire marks better. Smooth looks cleaner on day one and shows every drop of oil.
- Edge restraint and drainage. Concrete-set edge restraint and a channel drain at the garage apron. Skip either on clay and you’ll be repairing settlement.
- Brand matters less than the spec sheet. We work with brands like Belgard for pavers when the palette fits, and systems from Mighty Buildings and Boxabl come into play when a homeowner is pairing a driveway with a detached ADU project. The material brand is a distant second to the base prep underneath it.
What Paver Driveways Cost in University Park, TX
Plan on $7,000 – $18,000 for a paver driveway in University Park. Here’s what moves the number up or down:
- Square footage. A single-car approach sits at the low end; a long two-car driveway with an apron and a walkway extension pushes the high end.
- Existing surface and demo. Tearing out 4 inches of old concrete costs more than tearing out asphalt, and hauling it off a tight lot adds dumpster fees.
- Base prep and soil conditions. If the subgrade is soft clay that needs over-excavation or a geotextile layer, that adds to the job. We can’t know until we proof-roll, which is why we don’t quote from a photo.
- Paver grade. Clay brick and premium concrete pavers cost meaningfully more per square foot than standard concrete pavers.
- Permit and staging scope. Right-of-way permits for dumpsters and materials on a 50-foot lot are a real line item here, not a rounding error.
A written estimate from us spells out demolition, base depth, paver type, edge restraint, drainage, and disposal line by line, so you can compare apples to apples against another bid. What usually isn’t included in any paver driveway quote: moving irrigation lines, relocating utilities, or repairing the garage apron slab if it’s failed. We flag those separately before work starts so there are no change orders halfway through. Our quotes are upfront pricing with no surprises: the number you see is the number you pay. Call (844) 560-0925 for a free estimate on paver driveways in University Park, and we’ll put the full scope on paper.

See the difference
Before
After
Before
After
Before
AfterWhat University Park Homes Specifically Do to This Job
University Park is a built-out, landlocked Park Cities enclave where the only way to build is tear-down and rebuild, which means a paver driveway here is rarely a standalone project. Most of the jobs we do in 75225 sit on 50- and 60-foot lots next to occupied million-dollar houses, and the discipline is squeezing a real driveway onto a lot where the setback line and lot-coverage limit, not the building code, decide the footprint. That cuts two ways. It means the driveway has to respect a side yard that’s often only three feet wide with zero-lot-line-style clearance, and it means staging, dumpsters, and material drops routinely spill onto the street and require coordination with the town. The original housing stock, 1920s to 1950s brick bungalows and Tudor cottages, has driveways sized for cars that were narrower than what’s in your garage today, so most projects involve rethinking the approach rather than replacing it in kind.
Then there’s the ground. North Texas blackland clay expands and contracts with every wet-dry cycle, and on a narrow lot that movement shows up as edge creep and settlement at the garage apron within a couple of years if the base isn’t built right. The dense tree canopy over SMU-area streets adds shade and debris, which means less sun-drying and more organic matter working into the joints. A paver driveway built without geotextile separation, concrete-set edge restraint, and proper joint sand will show all of it. That’s the local reality, and it’s why we don’t quote paver driveways in University Park from a satellite photo.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in University Park

Most paver driveways in University Park take 4 to 7 working days from demo to final walkthrough, weather permitting. The tightest part isn’t the laying, it’s the staging: on a narrow lot with limited street access, material deliveries and dumpster placement have to be sequenced carefully, and a rainy stretch can add a day or two. Call (844) 560-0925 and we’ll give you a realistic schedule for your specific lot.
Yes, if the work touches the right-of-way, the sidewalk, or the apron at the street, you’ll need town approval before we start. Interior lot driveways that don’t touch public infrastructure often move forward without a separate building permit, but the town’s review of lot-coverage and setback lines applies regardless. We handle the paperwork and coordinate with the town so you’re not the one chasing signatures. Call (844) 560-0925 to talk through your specific property.
Sometimes, yes, and sometimes that’s a mistake. If the existing slab is sound and the grade allows, an overlay can add 2 to 3 inches of pavers and base on top, which shortens the timeline. On the expansive clay here, though, a cracked or settled slab will telegraph through the new pavers within a season or two, so we usually recommend full removal. We’ll tell you honestly which one your driveway needs after we look at it. Call (844) 560-0925 for a free on-site assessment.
A paver driveway in University Park typically runs $7,000 – $18,000, and the variables that matter most are square footage, existing surface and demo cost, paver grade, base prep for clay soil, and any right-of-way permits needed for staging. A standard concrete paver job on a two-car driveway sits in the middle of that range; clay brick or premium pavers with a channel drain pushes toward the top. Call (844) 560-0925 for an exact written quote, and estimates are free.
Every paver driveway we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. That’s one of the longest workmanship guarantees in the residential construction space, and it covers the labor and installation, not just the material. The paver manufacturer’s product warranty is separate and we hand you the paperwork at the final walkthrough. Call (844) 560-0925 if you have questions about what’s covered.
Ready for a Number You Can Plan Around?
We’ll walk your lot, check the base and the setback line, and put a line-item paver driveway estimate in your hands with no pressure and no vague ranges. Calls are answered by a live person around the clock, so you can reach us at (844) 560-0925 whenever you’re ready to talk. If the project grows into a wider hardscape, that’s part of a full Driveway & Pavers in University Park scope, and homeowners often pair this with Door Installation in University Park once the approach is redone.
Where We Work

Our Driveway & Pavers team serves homeowners across University Park and the surrounding Park Cities, including 75225 and the blocks around SMU. We also work with homeowners on Cabinets & Countertops in University Park when a renovation runs from the driveway to the kitchen. Every technician is background-checked and arrives in uniform, and every job is backed in writing.
Written by the team at Groundwork Construction Co.












