







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Plano, TX: What It Takes
Concrete driveways and concrete work in Plano generally run $4,500 – $12,000 for a full driveway installation, and a straightforward drive is typically poured and finished in three to five working days. Age matters here more than square footage: Plano’s 1970s – 1990s subdivisions are hitting the point where slabs have cracked, settled, or scaled, so most of the work we schedule is replacement, not a fresh pour. Call (844) 560-0925 to schedule a free on-site estimate and we’ll measure your actual drive before we quote it.

The compliance layer comes first, and it decides more than the concrete does
Plano is a built-out, master-planned suburb, which means almost nothing here is a blank lot. The work is renovation and replacement inside established subdivisions, and that means two sets of rules run at the same time: Plano’s own permitting and inspection process, and the HOA architectural review that governs what your drive can look like from the street. In the older core around 75023 and 75075, that second layer is often the slower one. Approvals for a driveway replacement are common, but the review board wants to see material and finish, the apron and approach, and how the pour meets the sidewalk or alley, and some communities have opinions about scoring, staining, and joint patterns.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How we run a concrete driveway job, start to finish
Every stage below is a real checkpoint. Here’s what happens and when, and what you’re deciding along the way.
Stage 1: Site visit and measure (1 day)
We walk the existing drive, measure the run and width, check slope and drainage away from the foundation, and look at the base underneath. If the drive crosses a sidewalk or alley approach, we photograph that too, because those are the details the review board and the city inspector both look at. You’ll leave this visit knowing the material options and whether your HOA needs a submission before anything is scheduled.
Stage 2: Permits and architectural review (1 – 3 weeks, runs in parallel)
We pull the required permits and prepare the HOA submission where your community requires one; most Plano HOAs want a material sample, a drawing or photo of the finished look, and sometimes a finish-color chart. Approval timelines vary by association, so this stage is the wild card on the schedule. We submit early and don’t order concrete until both sides sign off.
Stage 3: Demo and base prep (1 – 2 days)
The old slab comes out, along with any failed base. We re-grade and compact the subgrade and form the new drive to the approved dimensions, with slope set away from the house. On the mature-tree lots in 75023 and 75075, root systems sometimes dictate a slightly narrower driveway or a different forming approach, and that gets settled here rather than mid-pour.
Stage 4: Pour, finish, and cure (2 days plus curing time)
The pour itself is a morning’s work for a typical residential drive, then finishers cut control joints and apply the finish you selected. Concrete cures rather than dries; we keep traffic off it for the period we specify in writing, and heavy vehicles stay off longer. You’ll want your cars parked elsewhere for a week. This is the stage where homeowners most often ask us to shift a date, so we schedule it with a weather buffer.
Stage 5: Inspection and walkthrough (1 day)
Once curing is complete, we meet the inspector and walk the finished drive with you: joints, finish consistency, drainage pitch, and the transition at the apron and any alley approach. Anything that doesn’t match what we committed to gets corrected under our 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction.
The options you’ll choose between
Concrete is not one product. What you pick here drives both the price and how the drive looks in ten years:
- Standard broom finish, 4-inch slab: the default for most Plano drives. Good grip, low cost, and the finish most HOAs approve without a second look. It shows tire marks and stains sooner than textured options.
- Exposed aggregate: a rougher, warmer surface that hides dirt and holds up well to North Texas sun. Costs more and takes a bit more care with the finishing crew.
- 5- to 6-inch slab with rebar: the right call where the drive takes heavy vehicles or sits over problem soil. It’s the upgrade we most often recommend for 1970s – 1990s slab-foundation homes.
- Integral color and scoring: pigment mixed into the concrete or joints scored in patterns. It reads well from the street and stays within most community color requirements; ask your HOA before choosing a tone.
- Widened apron and turnaround: a common request on tight Plano lots where backing out is awkward. It adds square footage and often triggers a second look from the review board, so plan the drawing early.
Most of our Plano customers choose broom finish over a reinforced slab, then add scoring or a subtle color once the HOA approves it.

See the difference
Before
After
Before
After
Before
AfterWhat Concrete Driveways & Concrete Work costs in Plano, TX
Plan on $4,500 – $12,000 for a full concrete driveway installation here, with driveway replacement of an existing slab landing at $5,000 – $14,000 once demolition and base work are included. Where your number falls depends on five things:
- Square footage and width. A single-car width over a short run sits near the low end; an extra-wide drive with a turnaround pushes toward the top.
- What’s under it. Failed base, root intrusion, or a drive poured over the old slab adds removal and haul-off cost.
- Thickness and reinforcement. Mesh to rebar and 4 inches to 6 inches is a meaningful jump in material.
- Finish and color. Broom is the baseline; exposed aggregate and integral color add labor and time.
- Permits and HOA submission. Required permits, inspections, and any engineering or drawing work for the review board are part of the written quote.
A written estimate from us is line-item: demo, haul-off, base prep, forming, concrete volume, reinforcement, finish, permit, and cleanup. Items we quote separately because they’re not always needed include drainage corrections, sidewalk or apron replacement, and any grading tied to foundation work.
What Plano homes specifically do to this job
North Texas black-clay expansive soil is the single biggest driver of concrete failure here. That clay swells when wet and shrinks hard in a dry summer, and it works on a driveway the same way it works on a slab foundation. We see the typical pattern most in the older 75074 and 75023 neighborhoods, where 1970s and 1980s drives are showing offset joints, heaved panels, and cracking that started at the soil and worked up. Summers are hot enough that we pour early and shade the fresh slab, and hard freezes add a freeze-thaw cycle that finished concrete has to be air-entrained to survive. HOA review is the second constant: replacement drives need approval on material, finish, and sometimes color, and we prepare the submission. If your drive ties into a larger exterior project, homeowners often pair this with ADU Site Prep & Utilities in Plano when a detached unit is going in and needs its own access, or with Door Installation in Plano when the drive and entry are being refreshed together.
Serving Plano, TX – Our Local Coverage Area
We serve Plano and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Plano
A typical Plano driveway is demolished, poured, and finished within three to five working days, then needs curing before you park on it. The permit and HOA review stage is the variable: some associations approve a replacement in days, others take several weeks. We schedule the pour with a weather buffer for spring hail season and summer heat.
Most driveway replacement and new concrete work in Plano requires a permit and inspection through the city, and your HOA likely requires separate architectural approval. We handle both submissions and schedule the inspection before the job closes. Call (844) 560-0925 and we’ll tell you what your specific street requires.
Yes. A driveway replacement stays on the surface, so foundation and plumbing are not disturbed unless the base work uncovers a problem. Where we find a settled or cracked panel tied to soil movement, we’ll document it and flag whether a structural look is warranted before we pour over it.
In almost every case, yes, and we prepare the submission to make sure it does. Standard broom finish in a neutral tone is approved in most Plano communities, and exposed aggregate or integral color may need a sample and a color chart. We submit before we order concrete so you’re never ripping out a driveway the board won’t accept.
Our concrete driveways are covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, not damage from vehicles, trees, or normal surface wear. We walk the finished drive with you and put the terms in writing.
Get a free estimate for concrete work in Plano

We’ll come to your property, measure the drive, check the base, and give you a line-item written quote with the permit and HOA submission accounted for. No surprises, no change orders for things we should have seen on day one. Call (844) 560-0925 to schedule your free estimate; a live person answers around the clock, and we’ll answer everything on the first call. This work is part of our wider Driveway & Pavers service, and you can see the full picture on Driveway & Pavers in Plano. Prefer to call later? Start with our Plano service-area page and we’ll take it from there.
Written by the team at Groundwork Construction Co. of Carrollton.












