







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Murphy, TX: What It Costs and How Fast It Goes In
A chain link fence in Murphy, TX typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are finished in one to two working days once the layout is staked. That covers posts, rails, mesh, concrete footings, a walk gate, and haul-off of the old fence if there is one. The number climbs when you’re fencing acreage, running through limestone-heavy clay, or adding drive gates. Call (844) 560-0925 and we’ll walk the property line with you and put a fixed number in writing before any post goes in the ground.

How a Chain Link Fence Goes In, Start to Finish

Chain link is one of the few exterior projects where the schedule is genuinely predictable. Here’s the actual sequence we run in Murphy, and where you’ll be asked to make a call.
Stage 1 – On-site estimate and layout (day of the quote). We measure the run, check where the property pins fall, and confirm utility locates before anyone digs. This is where you decide fence height (4, 5, or 6 feet), mesh gauge, and gate placement. If your line runs near a pool, an AC condenser, or a shared fence with a neighbor, we flag it now, not on install day.
Stage 2 – Utility locate and permit check (1 to 3 business days). Texas law requires a locate before excavation, and we schedule it. In Murphy we also check whether your HOA has a submittal requirement, because plenty of the subdivisions here do. You’ll get a straight answer on whether a city permit applies to your height and location.
Stage 3 – Demo and post setting (day 1 on site). Old fence comes out first, and we haul it. Then we auger post holes to depth, set terminal posts in concrete, and let them cure. Line posts go in the same day. On a typical 150- to 200-foot residential run, this is a full day of work.
Stage 4 – Rails, mesh, and gates (day 2). Top rail and tension wire go up, mesh gets stretched and tied off, and the walk gate and any drive gate get hung and adjusted. This is the stage that separates a fence that stays tight for fifteen years from one that sags by year two – the stretch matters more than the parts.
Stage 5 – Walkthrough and cleanup (end of day 2). We tension-test every section, confirm the gates latch clean, rake the disturbed soil, and leave the yard the way we found it. You sign off on the finished fence, and the work is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link isn’t a single product. Here’s what the decision points look like and where the honest trade-offs sit.
- Mesh gauge – 11.5 vs. 9 vs. 6. 11.5-gauge is the light residential standard and the cheapest at the low end of the range. 9-gauge is heavier and resists bending from dogs and kids far better. 6-gauge is commercial grade and rarely worth the premium on a residential lot.
- Vinyl-coated vs. galvanized. Galvanized is the budget choice and dulls to gray over time. Black or green vinyl-coated mesh runs a few hundred dollars more across a typical run but looks cleaner and holds color against North Texas sun.
- Height – 4, 5, or 6 feet. 4 feet works for a boundary marker, 5 is the common HOA-friendly middle, and 6 feet is what most people want for dog containment. Confirm your HOA’s cap before you commit to 6.
- Gates. A standard walk gate is usually included in the base number. Drive gates, double gates, and self-closing or self-latching hardware push the job toward the top of the range.
- Top rail vs. top tension wire. Top rail is stiffer and standard on most residential work; tension wire is the lighter, cheaper option and shows more sag over time.
What Chain Link Fence Costs in Murphy, TX
For a typical Murphy residential lot, expect $3,500 to $9,000. A straightforward 150-foot 4-foot galvanized run with one walk gate sits near the bottom. A 300-foot 6-foot vinyl-coated run with a drive gate and a corner lot’s worth of terminal posts pushes toward the top. Here’s how the number breaks down.
| Line item | Typical range |
|---|---|
| Standard residential run (150-200 ft, 4-5 ft height) | $3,500 – $6,000 |
| Extended or corner-lot run with multiple terminals | $6,000 – $9,000 |
| Drive gate or double gate addition | $600 – $1,800 added |
| Old fence demo and haul-off | $250 – $700 added |
Five things move the number: total linear footage, fence height and gauge, how many gate openings you need, whether old fence has to come out, and whether the run crosses anything that requires a different post depth or a corner brace. A written estimate from us lists each of those as a separate line, so you can see exactly what’s driving the total. What’s included: posts, concrete, rails, mesh, ties, walk gate, labor, and cleanup. What typically isn’t: HOA submittal fees, and any landscaping repair beyond raking.

See the difference
Before
After
Before
After
Before
AfterWhat Murphy Homes Specifically Do to This Job
Murphy is a small, mostly built-out Collin County suburb, and nearly all the work here is renovation or infill on lots that were subdivided and built out between the 1980s and 2000s. That changes how a chain link fence job actually runs. You’re working an occupied home in a tight, fully developed neighborhood, fitting crews, a dumpster, and material staging onto a narrow suburban lot with no vacant parcel to absorb the mess. We plan the staging and the gate alignment around where your driveway and AC pad sit, not around an open field.
The soil is the other factor. Murphy sits on North Texas blackland prairie with expansive clay that swells and shrinks through the wet-dry cycle. That matters to a fence – post holes need to be augured deep enough that heaving clay doesn’t push a terminal post out of plumb, and we set footings with that in mind. It’s the same soil condition that makes foundation work and piering so common on the slab-on-grade homes here, and it’s why we don’t shortcut post depth to save a day.
If your fence is part of a wider exterior project, homeowners often pair this with Door Installation in Murphy or site work that ties into ADU Site Prep & Utilities in Murphy when a backyard is getting laid out around a new structure. For the broader scope, see our Fence Installation in Murphy page. And if you’re comparing chain link to other materials, our Fence Installation service page covers the full range.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Murphy

Most residential chain link fences in Murphy go in over one to two working days once utility locates and any HOA approval are done. The estimate and layout happen on the quote visit, and the permit or locate wait is typically one to three business days before install day.
It depends on the height and whether an HOA covers your subdivision – plenty of Murphy HOAs require an architectural submittal for any new fence. We check both before we dig, and if a city permit applies to your run, we’ll tell you up front so the schedule isn’t a surprise.
A standard Murphy backyard chain link run lands in the $3,500 to $9,000 range, with most single-lot jobs falling between $3,500 and $6,000. Height, gauge, gate count, and whether old fence has to come out are the main variables. Call (844) 560-0925 for an exact number – the estimate is free and on-site.
No – the number you see on the written estimate is the number you pay. We list posts, concrete, mesh, gates, demo, and cleanup as separate line items so nothing gets added mid-job. If we find something that genuinely changes the scope, we stop and talk to you before proceeding.
Every job we run is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. The term runs two full years rather than the standard one year most contractors offer. It’s in writing, not a verbal handshake.
Get a Free Chain Link Fence Estimate in Murphy
If you’re planning a chain link fence in Murphy, the first step is a free on-site estimate. Call (844) 560-0925 and we’ll schedule a visit, walk the property line with you, and hand you a fixed line-item quote with no surprises. Live person answers every call, day or night. Reach out and we’ll get your fence on the calendar.
Written by the team at Groundwork Construction Co.












