







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Frisco, TX: What the Job Actually Involves
Most Frisco cabinets & countertops projects land between $14,000 and $45,000, and the big swing comes down to whether you’re replacing boxes only or rebuilding the whole run with new countertops, an island, and a backsplash. A straight cabinet swap with new countertops usually finishes in two to three weeks once materials are on site. Call (844) 560-0925 and we’ll walk you through what your kitchen actually needs before you commit to a number.

If you’re pricing this out, you already know the kitchen is the room that dates first and sells slowest. A 2004 build off Preston Road with honey oak uppers and a beige laminate top is the most common call we get in Frisco, and it’s rarely just a cosmetic problem. Doors sag, drawers stick, and the countertop has taken fifteen years of Texas heat cycling.
How We Run Cabinets & Countertops From Demo to Final Caulk

The sequence matters more than most homeowners expect. Cabinets and countertops are two different trades that have to hand off cleanly, and skipping a step is how you end up with a countertop that doesn’t fit the boxes or a dishwasher that won’t slide back in. Here’s the actual order.
Stage 1: Measure, decide, and lock the layout (day 1, about 2 hours)
We template the existing run, check wall plumb and floor level, and confirm the appliance openings. You decide box material, door style, finish, and whether the sink stays put. This is also where we flag anything that will push the job into a permit scope, like moving a gas line for a new range position. Nothing gets ordered until this is signed off.
Stage 2: Order and lead time (2 to 5 weeks, no crew on site)
Stock cabinets arrive in about two weeks; semi-custom runs four to five. Countertops get templated only after the boxes are set, so the stone doesn’t get cut against a guess. You’ll pick slab or quartz color during this window, and we confirm the sink and faucet are on hand before demo day.
Stage 3: Demo and prep (1 to 2 days)
Old boxes and countertops come out, we cap or relocate the plumbing and electrical as scoped, and the walls get patched and primed where the old backsplash came off. If the floor wasn’t level, this is when it gets addressed. A dishwasher or disposal that’s staying gets disconnected and set aside rather than tossed.
Stage 4: Cabinet set and countertop template (2 to 3 days, then a 5 to 10 day gap)
Boxes go in, get shimmed and leveled, and the doors and drawers go on. Then the countertop fabricator templates the actual installed cabinets. That gap is normal and it’s the step homeowners get impatient with, but cutting stone before the boxes are final is how seams land in the wrong place.
Stage 5: Countertop install, sink set, and punch list (1 to 2 days)
Stone goes down, the sink and faucet get set, and we run the final caulk lines and check every door and drawer for swing and alignment. You walk the job with us before we call it done. Most Frisco cabinets & countertops jobs finish in that three-week window, longer if you’re waiting on a custom slab.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on Cabinets & Countertops
This is where the budget lives. The honest trade-offs:
- Stock vs. semi-custom boxes: Stock is faster and cheaper but limited to standard widths, so you’ll likely use filler strips. Semi-custom lets you hit the ceiling and fit odd corners, and it costs meaningfully more per linear foot. KraftMaid sits in that semi-custom tier and is a solid middle path.
- Plywood vs. particleboard boxes: Plywood holds up better around the sink and in North Texas humidity swings. Particleboard is cheaper and fine for uppers, riskier for base cabinets under a wet zone.
- Quartz vs. granite vs. laminate: Quartz is the default for a reason – it doesn’t need sealing and holds color. Granite is a natural slab, so every piece is different, and it wants resealing. Laminate is the budget play and honestly fine if you’re selling in a few years. Cambria quartz is one of the brands we work with most.
- Slab thickness and edge profile: A 3cm slab with a eased edge is standard; a thicker-looking built-up edge or a waterfall island adds cost and weight.
- Undermount vs. drop-in sink: Undermount is cleaner and easier to wipe, but the countertop has to be cut and finished for it, which is a fabrication cost.
Prefab or modular construction brands like Cover and Dvele come up occasionally when a homeowner is weighing a panelized addition against a traditional stick-build, but for a straight cabinets & countertops job the decision stays inside the four points above.
What Cabinets & Countertops Costs in Frisco, TX
Expect $14,000 to $45,000 for a full cabinets and countertops replacement in Frisco, with most jobs landing in the low-to-mid $20s. Here’s how the line items break down:

| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island | $3,000 – $10,000 |
| Full project (cabinets + tops + island) | $14,000 – $45,000 |
What pushes a job to the high end: custom or semi-custom boxes across a large run, relocating the sink or range (which means moving plumbing or gas), a structural change like removing a wall, and premium stone with a fabrication-heavy edge. A like-for-like swap in a standard subdivision kitchen with stock boxes sits near the bottom of the range.
A written estimate from us covers demo, disposal, cabinet set, countertop template and install, and the final punch list. It typically does not cover appliance replacement, reframing, or moving electrical that wasn’t in the original scope. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Frisco Homes Specifically Do to This Job
Frisco is one of the fastest-growing large cities in the country, and almost all of the housing stock here is post-1990s master-planned development. That means nearly every cabinets & countertops call we take is a builder-grade upgrade on a 15-to-30-year-old kitchen, not a repair on century-old boxes. The typical culprit: oak or maple fronts with a laminate top from the original build, in a subdivision off Eldorado Parkway or out toward 75035, where the doors have finally given out.
The other thing that shapes this job is the HOA layer. Nearly every newer Frisco subdivision is HOA-governed, and while interior cabinets & countertops generally don’t need architectural approval, the moment a project touches an exterior wall, a window, or an addition footprint, that approval sits on top of the city permit. We build that review time into the schedule so it doesn’t stall the job. Frisco’s clay soil matters too: on a large kitchen island or a load-bearing run, we check the slab and floor for movement before setting boxes, because a foundation that’s shifting will rack cabinet doors out of alignment within a year.
If the project is bigger than the kitchen, homeowners often pair this with Kitchen Remodeling in Frisco for the full scope, or loop in our Kitchen Remodeling team for the layout work. We cover the whole of Frisco, from 75034 through 75035 and 75033.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Frisco

Most jobs run two to three weeks from demo to final walkthrough, with a five-to-ten-day gap between cabinet set and countertop install while the stone gets fabricated. Custom slab selections can add another week. The clock doesn’t start until materials are on site, so lead time is the real variable.
Usually not if you’re swapping cabinets and countertops in place. You’ll need one if the scope moves plumbing, gas, electrical, or a load-bearing wall. We pull the permits and coordinate the inspection when the job crosses that line, and we’ll tell you up front whether your project does.
Yes, and that’s the most common path. Keeping the sink and range where they are avoids plumbing and gas work and keeps you in the lower half of the range. Moving them is doable, but it’s the single biggest cost jump on this job.
The full range is $14,000 to $45,000, with cabinet installation alone at $4,000 to $13,000 and countertops at $2,000 to $6,500. Call (844) 560-0925 for an exact quote on your kitchen – estimates are free and we put the line items in writing.
Every cabinets & countertops project we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform.
Get a Free Cabinets & Countertops Estimate in Frisco
Call (844) 560-0925 to schedule a free on-site estimate for cabinets & countertops in Frisco. A live person answers, day or night. We’ll measure your kitchen, walk through the material options with real numbers, and hand you a written line-item quote with no surprises – plus $1,000 off projects over $10,000 and 0% financing for 18 months if you need to spread the cost. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co.












