







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Frisco, TX: What It Takes, What It Costs
Door installation in Frisco, TX typically runs $650 to $2,400 per door installed, and most single-door projects are finished in one day with the old slab hauled off. Entry systems with sidelights, transoms, or custom sizing land at the higher end and can take two to three days once painting and trim are complete. Call (844) 560-0925 for a free on-site estimate, and we’ll walk your door opening, check your HOA’s approved styles, and give you a written number before anyone swings a hammer.

How We Run a Door Installation, Stage by Stage

Door work looks simple until you open up a wall and find a rough opening that’s out of square or a header that was framed for a 32-inch door when you want a 36. Here’s the sequence we follow on every Frisco door installation so there are no surprises mid-job.
Stage 1: Measure and HOA check (day 1, about 60 minutes)
We measure the rough opening, the jamb depth, and the swing direction. At the same time we pull your subdivision’s architectural guidelines so we know what door styles, colors, and glass configurations are approved before you fall in love with something the ARC will reject. This is where most out-of-town crews create problems: they quote a door that never had a chance of passing review.
Stage 2: Order and lead time (1 to 4 weeks, depending on the door)
A stock steel or fiberglass door can arrive in under a week. A custom-sized wood entry with a specific stain and glass insert runs three to four weeks. You decide the material, finish, hardware, and whether you want a storm door or a screen. We confirm the order against the approved HOA spec one more time before it ships.
Stage 3: Demo and prep (day of install, 1 to 2 hours)
We pull the old door, trim, and threshold, then inspect the framing and sill for rot, water damage, or settling. On Frisco’s clay-soil slabs, a slightly racked opening is common and gets shimmed and squared before the new unit goes in. We protect the floors and seal off the rest of the house so dust doesn’t travel.
Stage 4: Set, shim, and seal (2 to 4 hours)
The new door gets set plumb and level, shimmed at the hinge side, and anchored. We insulate the gap, seal the exterior with backer rod and caulk, and check that the door latches cleanly and swings without rubbing. On exterior doors we pay close attention to the threshold and weatherstripping, because North Texas wind-driven rain finds every gap.
Stage 5: Trim, hardware, and walkthrough (1 to 2 hours)
We reinstall or replace casing, set the lockset and deadbolt, adjust the strike plate, and clean up. You walk the door with us, test the swing and lock, and get the written workmanship guarantee in hand. Most jobs wrap in a single visit; the two-day ones are entry systems with sidelights or jobs that need paint and trim work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
Every door decision comes down to a trade-off between cost, look, and how it holds up against Frisco’s heat and hail. Here’s what we walk through with homeowners.
- Steel entry doors: The most common pick for front doors in Frisco’s newer subdivisions. Strong, secure, and takes paint well. Ranges roughly $650 to $1,400 installed. Dents show, so hinge-side protection matters on a busy entry.
- Fiberglass entry doors: Mimics wood grain, resists dents and moisture, and handles sun exposure better than steel over time. Runs about $900 to $1,800 installed. The better choice for a west-facing door that bakes all afternoon.
- Solid wood doors: The premium look, with real grain and weight. Real wood needs refinishing every few years in Texas sun. Expect $1,400 to $2,400 installed for a quality unit.
- Interior doors (hollow or solid core): Hollow-core is light and inexpensive, around $250 to $450 installed. Solid-core cuts sound transfer and feels more substantial, roughly $350 to $650 installed. We match door style and trim to the rest of the house.
- Glass and finish: Sidelights, transoms, and decorative glass add $400 to $1,200. Low-E glass helps with heat gain and is worth it on any sunny elevation. Hardware and finish choices range from $50 to $350.
What Door Installation Costs in Frisco, TX
For a standard single exterior door, expect $650 to $2,400 installed, including the door, labor, hardware, and cleanup. Interior doors land at $250 to $650 each. A full entry system with sidelights and a transom can run $2,400 to $5,500. Here’s what pushes a job from the low end to the high end.

- Door material and grade: Stock steel versus a custom fiberglass or wood unit can swing the number by $1,000 or more.
- Opening condition: Rot, settling, or a rough opening that doesn’t match standard sizing adds framing and prep time. On Frisco’s expansive clay soil, a racked opening is not unusual and needs squaring before install.
- Size and configuration: A standard 36-inch door is the cheapest path. Sidelights, transoms, double doors, and arched openings add both material and labor.
- Relocating structure or utilities: Widening an opening means header work; moving a light switch or adding wiring means an electrician, which changes the scope.
- Finish work: Paint, stain, trim upgrades, and a storm or screen door add to the final line.
Your written estimate will list the door model, labor, hardware, disposal, and any framing or finish work. It won’t include painting by a separate trade unless you ask us to quote it, or repair to a rotted subfloor we find after demo without documenting it first. We give you upfront pricing, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Frisco Homes Specifically Do to a Door Installation
Frisco’s built environment shapes this job in ways that don’t show up in a generic door quote. Almost every home here is 1990s-or-newer construction in a master-planned subdivision, which means the door work is new-build replacement, builder-grade upgrade, or infill remodel rather than repair of old housing stock. The upside is predictable framing and standard sizing; the catch is that nearly every subdivision is HOA-governed, and exterior projects from front doors to trim colors often need architectural review approval on top of the city permit. An out-of-town crew that skips that step hands you a violation notice.
We spend time up front getting the approved door style, color, and glass configuration in writing, and we keep repair and replacement panels matched to the original builder spec so your entry reads as a coherent set rather than three different doors. In neighborhoods off the Dallas North Tollway and around The Star, where townhomes and newer single-family builds sit close together, quiet operation matters too – we adjust hinges and strikes so a door closes without a slam that carries into the next unit. Clay soil movement and spring hail also mean we check the threshold and weatherstripping every time, because a door that seals poorly lets in wind-driven rain and drives up your cooling bill. We cover 75034, 75035, and 75033 as part of our service across Frisco, and this is one project homeowners often pair with Cabinets & Countertops in Frisco when they’re refreshing the whole entry level. If you’re planning a bigger scope, it’s worth looking at the Windows & Doors in Frisco page for how doors fit alongside windows, and our Windows & Doors hub lays out the full service.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Frisco

A standard single door installs in one day, usually three to five hours on site. Custom entry systems with sidelights or doors needing paint and trim take two to three days, and lead time for a custom unit runs one to four weeks. Call (844) 560-0925 for a timeline on your specific door.
Replacing a door in the same opening typically doesn’t require a separate permit, but changing the size of the opening or altering the wall structure does, and your HOA may still require architectural approval regardless of the permit. We confirm both before ordering. Call (844) 560-0925 and we’ll sort out what your project needs.
Yes – most door replacements go into the existing opening with no structural or plumbing work at all. Widening an opening for a larger door means header work and possibly electrical if a switch is in the way. We tell you which path your project is on before you commit, and the estimate reflects it.
Single exterior doors run $650 to $2,400 installed, interior doors $250 to $650 each, and full entry systems with sidelights $2,400 to $5,500. Material grade, opening condition, and finish work drive the final number. Call (844) 560-0925 for an exact quote – estimates are free.
Every door we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That sits alongside the manufacturer’s warranty on the door unit itself. We put the workmanship guarantee in writing at the walkthrough.
Get a Free Door Installation Estimate in Frisco
A door is one of the few upgrades that changes how a house feels every single day, and in Frisco’s HOA-heavy subdivisions it has to clear review before it ever ships. Call (844) 560-0925 and a live person answers any hour, any day. We’ll measure the opening, check your subdivision’s approved styles, and hand you a written, upfront number with our 730-Day Done Right Promise behind the work. Background-checked, uniformed technicians on every job.
Written by the team at Groundwork Construction Co.












