







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Murphy, TX: What the Job Really Costs and How Long It Takes
Replacing cabinets and countertops in Murphy, TX typically runs $14,000 to $45,000, with most single-room projects landing in the middle of that band and finishing in two to four weeks once materials are on site. Cabinet installation alone sits at $4,000 – $13,000; countertop installation at $2,000 – $6,500. The bigger variable is what’s behind the old boxes. Call (844) 560-0925 and we’ll walk your kitchen, measure, and put real numbers in front of you.

How We Run a Cabinet and Countertop Job, Stage by Stage

Cabinet and countertop work has a fixed order, and skipping a stage is how kitchens end up with counters that don’t sit level or doors that rub. Here’s the actual sequence we follow.
1. Measure, template, and lock the layout (days 1 – 3)
We take field measurements and confirm the cabinet run, drawer stack heights, and appliance openings. You decide door style, finish, and whether the sink stays put. If you’re changing the sink location or moving the range, that decision has to happen here, not after the boxes are ordered, because it changes the plumbing and electrical scope.
2. Order and lead time (3 – 6 weeks, running in the background)
Stock cabinets arrive in about a week. Semi-custom runs three to five weeks. Fully custom can stretch past eight. Countertops get templated only after the base cabinets are set, so the slab isn’t ordered yet at this point. You’ll sign off on the cabinet order and the countertop material before anything is cut.
3. Demo and prep (1 – 2 days)
We pull the old cabinets, shut off and cap the plumbing, and check what the wall is actually doing. In Murphy’s older slab homes this is where we find out whether the floor is flat enough for a level cabinet run or needs shimming and patching first. We also open the wall where the new layout needs an outlet or a supply line.
4. Cabinet set and countertop template (2 – 3 days, then a gap)
Base and wall cabinets go in, get shimmed level, and are fastened to studs. The countertop fabricator templates the installed boxes, which usually means a second visit a few days later to set the slab or the laminate top. Sink cutouts, faucet holes, and any island overhang get confirmed at template time.
5. Countertop set, final connections, punch list (1 – 2 days)
The countertop goes down, the sink and faucet get connected, and we run the final check: drawers, doors, alignment, silicone at the backsplash seam. You walk the job with us before we call it done, and everything is covered by our 730-Day Done Right Promise. If a door sags in month eight, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Most of the budget lives in three decisions: cabinet construction, countertop material, and whether the layout changes. Here’s the honest trade-off on each.
- Stock vs. semi-custom cabinets. Stock is fastest and cheapest, but you’re limited to standard widths and you’ll likely need filler strips. Semi-custom lets you hit odd wall lengths and pick interior organizers. Custom buys you exact dimensions and premium finishes at the top of the range.
- Plywood vs. particleboard boxes. Plywood holds screws better and survives a slow leak. Particleboard is common at the low end and fine in a dry kitchen, less forgiving if a supply line drips behind a cabinet.
- Quartz vs. granite vs. laminate. Quartz is non-porous, needs no sealing, and handles North Texas humidity well. Granite is natural and heat-tolerant but wants resealing. Laminate is the budget pick and has gotten genuinely good, but it won’t take a hot pan.
- Full-overlay vs. inset doors. Full-overlay is the standard, more forgiving, and less expensive. Inset doors sit flush in the frame and look sharper but demand a level cabinet and tighter tolerances.
- Keep the layout vs. move the sink. Keeping plumbing where it is saves real money. Relocating the sink or range means new supply and drain lines plus electrical, which adds cost and time.
On finishes, we work with KraftMaid cabinetry and Cambria surfaces among our brand partners, so you can see and touch the actual product rather than picking from a swatch book.
What Cabinets & Countertops Cost in Murphy, TX
Plan on $14,000 – $45,000 for a full cabinet and countertop replacement in Murphy, and expect the number to land at the low end only when the layout stays put, the boxes are stock, and the countertop is laminate or a modest quartz.
Five things push a job toward the top of that range:

- Kitchen size and cabinet count. A galley is not a 14-foot L with a peninsula. More boxes, more doors, more money.
- Existing condition. Out-of-level floors, water damage behind the sink, or crumbling drywall add prep days.
- Moving plumbing or electrical. A relocated sink or range is the single biggest line-item jump.
- Material grade. Custom cabinetry and a full slab of premium quartz can double the material cost over stock and laminate.
- Permit scope. A straight swap may not need one; moving plumbing or gas does.
Our written estimate is line-itemed: cabinets, countertop material and fabrication, demo, installation, and permits. What it typically doesn’t include is appliance cost, new flooring, and backsplash tile, which has its own page. Upfront pricing means the number you see is the number you pay, and projects over $10,000 get $1,000 off with 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy Homes Specifically Do to This Job
Almost all of our cabinet and countertop work in Murphy happens inside an occupied home on a fully built-out lot, and that shapes the job as much as the material does. Murphy’s housing stock is 1980s to 2000s single-family brick-veneer homes on slab-on-grade, which means the cabinets we’re pulling are usually original or one generation old and the layout was built around appliances of that era. That often shows up as a cabinet run that sits a little proud because the slab has moved over the decades, or a sink base with soft spots from a slow drip nobody caught.
The bigger local wrinkle is staging. There are no vacant parcels to park a dumpster on, so on streets off Murphy Road and around the older subdivisions we’re fitting a dumpster, a material delivery, and the crew onto a narrow driveway without blocking your neighbor. Plan on a tighter, faster demo day and a set delivery window for the cabinet truck.
If the kitchen project grows into a layout change or a bump-out, that scope belongs under Kitchen Remodeling in Murphy, and some homeowners pair this work with a Garage Conversion ADU in Murphy or a New Detached ADU in Murphy when they need the added living space. We cover the whole of Murphy, ZIP 75094, and the surrounding Collin County neighborhoods. For a full scope project, start with our kitchen remodeling service.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Murphy

Most jobs take two to four weeks from demo to final walkthrough, with three to six weeks of lead time before that for materials. Custom cabinetry stretches the timeline; stock keeps it tight. Call (844) 560-0925 for a schedule based on your specific selections.
A straight replacement of same-location cabinets and tops usually doesn’t require a permit; moving plumbing, gas, or electrical does. We confirm the requirement against your scope before work starts and pull what’s needed so inspections pass. Call (844) 560-0925 and we’ll tell you which side of the line your project falls on.
Yes. Keeping the sink, range, and wall layout in place is the standard approach and the cheapest one. You get new boxes, new doors, and new counters over the existing footprint. Moving the sink is doable but adds plumbing and drywall work and moves the number up. Call (844) 560-0925 to talk through whether the current layout works.
Expect $14,000 – $45,000 for a full kitchen, with cabinets at $4,000 – $13,000 and countertops at $2,000 – $6,500 within that total. Kitchen size, material grade, and any plumbing relocation are what move it. Call (844) 560-0925 for an exact quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise, so if a door misaligns or a seam fails, we make it right. The countertop material itself carries its manufacturer’s warranty on top of that. Call (844) 560-0925 with questions about coverage on your job.
Get a Free Cabinet and Countertop Estimate in Murphy
We’ll come out, measure your kitchen, note what’s behind the existing boxes, and hand you a written line-item estimate for cabinets and countertops in Murphy. No pressure, no vague bid, no change-order surprises. Call (844) 560-0925 to schedule your free estimate. A live person answers, and the number you see is the number you pay.
Written by the team at Groundwork Construction Co.












