







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Murphy, TX: What This Job Actually Takes
Paver driveways in Murphy, TX typically run $7,000 – $18,000 for a standard two-car approach and take 3 – 5 working days from demolition to the final sweep of joint sand. The wide swing in price comes from square footage, base depth, and paver grade, not from mystery add-ons. If your current driveway is cracked ruts or bare dirt, we’re replacing the whole base, not laying pavers over a failing slab. Call (844) 560-0925 to schedule a free on-site estimate and get a line-item number in writing.

How We Build a Paver Driveway, Stage by Stage

There’s no such thing as a paver driveway installed in an afternoon. Here’s the real sequence, so you know what to expect and what decisions land on you.
- Stage 1 – Site walk and layout (day 1, 1 – 2 hours). We mark the driveway footprint, note the slope away from the garage, and confirm where the expansion joint to the street and the transition to any sidewalk will fall. You approve the layout before anything gets cut.
- Stage 2 – Demolition and haul-off (days 1 – 2, 4 – 8 hours). We break out the old concrete or asphalt and load it into a dumpster parked on the driveway apron. On the tight lots Murphy is known for, staging the dumpster and material pallets is its own small logistics puzzle. You don’t decide anything here, but expect noise and a couple of days without driveway access.
- Stage 3 – Excavation and base prep (days 2 – 3, full day). This is the stage that decides whether your pavers last 30 years or 8. We dig down 6 – 10 inches, compact a crushed-stone base in lifts, and verify the grade sheds water. No base, no warranty. We don’t skip this to hit a cheaper number.
- Stage 4 – Setting and cutting (days 3 – 4, full day). Pavers go down over a compacted bedding layer, with edge restraint on the sides and the pattern you chose. You’ll pick the pattern and the color blend before day one, not on the morning of install.
- Stage 5 – Finish and inspection (day 5, half day). We cut the border course, sweep polymeric joint sand into the gaps, compact the surface, and clean up. You walk the job with us and sign off. Any settling or shifting in the next two years is covered under the 730-Day Done Right Promise.
Most paver driveway jobs land in a single week. If we’re pulling a permit for the approach or dealing with a large lot, add 3 – 5 days for review before we start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Pavers aren’t one product. Here’s what actually changes the look and the price:
- Concrete pavers vs. clay brick. Concrete pavers are the workhorse: $7 – $14 per square foot installed, tough against freeze-thaw and North Texas sun, and available in dozens of shapes. Clay brick runs higher and suits the more traditional brick-veneer homes common in Murphy, but it’s heavier and slower to install.
- Standard vs. premium grade. Manufacturer tier matters. A mid-tier paver from a brand like Belgard will outlast an economy line, and the color won’t chalk out after a decade. You’ll pay 15 – 25% more for premium and see it in year 15.
- Pattern. Running bond is the cheapest and fastest. Herringbone and basketweave carry better structural interlock and hold up better under tires, but they add 10 – 15% to labor.
- Base depth. A residential paver driveway needs 6 – 8 inches of compacted base; heavier use (RVs, trucks) pushes that to 10 – 12 inches. Deeper base is the single best investment in longevity.
- Edge restraint. Concrete curb versus plastic edge. Concrete costs more and holds a driveway together for decades. Plastic is fine for a walkway, less so under car load.
What Paver Driveways Cost in Murphy, TX

Murphy paver driveway pricing sits between $7,000 and $18,000 for a typical two-car setup. Here’s what’s moving that number:
| Variable | Effect on price |
|---|---|
| Square footage (24×24 vs. 24×40) | Adds $3,000 – $8,000 |
| Base excavation depth (6″ vs. 12″) | Adds $1,500 – $3,500 |
| Paver grade (economy vs. premium) | Adds 15 – 25% to material |
| Pattern complexity | Adds 10 – 15% to labor |
| Existing driveway condition and haul-off | Adds $500 – $2,000 |
What’s included in a written Groundwork estimate: demolition, haul-off, excavation to spec, compacted base, bedding, pavers, edge restraint, polymeric sand, cleanup, and the workmanship warranty. What’s typically excluded: driveway widening onto a setback line, drainage tie-ins to storm inlets, and any permit fees the city of Murphy assesses. Those get quoted separately so there are no change orders halfway through. No-hassle upfront pricing means the number you see on the estimate is the number you pay.
Every job we start is covered by the 730-Day Done Right Promise – if the base settles or a paver course shifts within two years, we come back and fix it. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so a $14,000 driveway can go in without draining your savings.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy Homes Specifically Do to This Job
Murphy is a small, largely built-out Collin County suburb. Most of the housing stock went up between the 1980s and 2000s – brick-veneer, slab-on-grade, wood-frame homes packed onto tight suburban lots in neighborhoods around McMillen Road and the winding residential streets off Murphy Road. That matters here because there are no vacant parcels to absorb the mess. Every paver driveway job we run in Murphy happens on an occupied home in a fully developed neighborhood, and it’s on us to fit a dumpster, a material pallet, and equipment into a driveway apron that barely accommodates two cars. Scrape into the neighbor’s setback, and you’ll hear about it from them, not the HOA. Speaking of which: many Murphy neighborhoods have deed restrictions requiring approval for a driveway material change from concrete, so check your HOA covenants before demo day.

Then there’s the soil. Murphy sits on North Texas blackland prairie with expansive clay that swells in wet springs and shrinks in summer drought. That clay is why paver driveways here need a deeper compacted base than a contractor from out of state would recommend, and why we can’t lay pavers over a slab with visible stair-step cracking – the movement will telegraph right through. If you’re rolling this into a Driveway & Pavers in Murphy plan, which might include walkways and patio edges, we schedule it as one base-prep phase so excavation happens once.
We also handle plenty of paver driveway work in the 75094 ZIP area and the surrounding Murphy neighborhoods. If your project runs beyond the driveway – say a new entry door or a kitchen refresh at the same time – homeowners often pair this with Door Installation in Murphy or Cabinets & Countertops in Murphy, and we coordinate the trades so you’re not living in a construction zone twice. For the broader range of what we build, see our Driveway & Pavers service.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Murphy

A typical paver driveway in Murphy takes 3 – 5 working days once we start. Demo and excavation eat the first two days, base prep is a full day, and setting and finishing take the last two. Add 3 – 5 days on the front end if your HOA needs to approve the material or the city needs to review an approach permit. Call (844) 560-0925 for a scheduling window specific to your lot.
Most Murphy residential driveway replacements don’t require a full building permit if the footprint stays the same and the approach to the street isn’t altered. Widen the driveway or change how it meets the curb, and you likely will need one. We look at the scope on the estimate, flag it in writing, and pull what’s needed. Estimates are free; call (844) 560-0925 to get an exact read on your property.
Sometimes, but only if the existing slab is intact with no cracking, no settling, and proper drainage. In Murphy’s clay, a 20-year-old slab rarely meets that bar. Layering pavers over a compromised base is the fastest way to throw $7,000 at a driveway that looks wrong in three years. We check the slab on-site and tell you honestly which scenario you’re in.
Murphy paver driveways run $7,000 – $18,000, with the low end for a standard two-car approach and mid-grade pavers and the high end for larger footprints, deeper base, or premium pavers. The variables are size, base depth, paver grade, pattern, and how much old material has to haul off. Call (844) 560-0925 for an exact quote – estimates are free.
Our workmanship is backed by the 730-Day Done Right Promise – if the base settles or a course shifts within two years, we come back and make it right. Manufacturer product warranties on the pavers themselves vary by brand, and we hand you the paperwork at final walkthrough. Call (844) 560-0925 to talk through warranty specifics on your project.
Get a Free Paver Driveway Estimate in Murphy
Call (844) 560-0925 and a real person picks up, any hour, any day. We’ll ask about your driveway size, what’s there now, and whether your HOA has restrictions. Then we set a time to walk the property, measure, check the base, and hand you a line-item estimate in writing – typically within a couple of days of the visit. No pressure, no change orders. Just a number you can count on for paver driveways in Murphy.
Written by the team at Groundwork Construction Co.












