







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Murphy, TX: What It Takes and What It Costs
Asphalt driveways and resurfacing in Murphy run $3,500 to $9,000 for a full new asphalt drive, and a resurfacing over an existing sound base typically costs a fraction of that. A straightforward residential drive is usually two days of work: tear-out and base prep on day one, then binder and finish course on day two. Sealing, which is a separate line item at $250 to $700, comes later. Call (844) 560-0925 for a free on-site estimate.

From Tear-Out to Topcoat: How We Build a Murphy Asphalt Drive

Every asphalt job is a base job first. The black top is only as good as what sits under it, and North Texas clay punishes shortcuts.
Stage 1: Site check and drainage plan (day 1, 1 to 2 hours)
We walk the drive, measure the slope, and check where water goes now. On Murphy’s lots, which are tight and fully built out, the usual problem is a low spot near the garage apron or a downspout that dumps onto the pavement. You decide the tie-in points and whether the new drive keeps the same footprint or widens.
Stage 2: Tear-out and haul-off (day 1, half a day)
We remove the old surface and any failed base material. This is the noisy stage, and on a narrow suburban lot the dumpster and material pile have to sit in the driveway or on the street. You decide staging location before we start so nobody is blocked in for the day.
Stage 3: Base prep and compaction (day 1, rest of the day)
We bring in crushed stone, grade it, and compact it in lifts. This is where a Murphy drive earns its lifespan, because expansive clay beneath a slab or base will move with the wet-dry cycle. You decide on the base depth once we see what the tear-out reveals.
Stage 4: Binder and finish course (day 2)
Hot asphalt goes down in two lifts, rolled and compacted while it’s still workable. Most residential drives here get 2 to 4 inches total. You decide the finished edge treatment: tucked to the yard, flush to a curb, or bordered. That border detail often pairs with fence work, and homeowners frequently combine it with a Chain Link Fence in Murphy to define the property line.
Stage 5: Cure and sealing schedule (day 2 onward)
Keep vehicles off for the first few days and heavier loads off longer. Sealing waits several months for a new drive so the asphalt can cure. We give you a written timeline so you know exactly when to park on it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Asphalt Options and the Honest Trade-Offs
- Full-depth new asphalt: $3,500 to $9,000. The right call when the old drive is cracked through or the base has failed. Longest lifespan, highest cost, two full days of work.
- Resurfacing (overlay): a sound base gets a new top course without full tear-out. Cheaper and faster, but it only works if the base is solid. On a drive already spider-cracked from clay movement, an overlay just hides the problem for a season.
- Base depth and stone grade: a thicker compacted base costs more up front and holds up far better on clay. This is the single biggest lifespan decision on the job.
- Edge treatment: tuck-in, flush curb, or a paver border. Borders add cost but stop edge raveling, which is the most common early failure we see.
What Asphalt Driveways & Resurfacing Costs in Murphy, TX
A typical Murphy asphalt driveway runs $3,500 to $9,000. A full driveway replacement lands $5,000 to $14,000. Sealing alone is $250 to $700.
Four things move that number:

- Size and slope: a longer or steeper drive means more material and more base work.
- Existing condition: failed base or deep cracking pushes toward full replacement rather than overlay.
- Access and staging: tight lots in Murphy mean careful staging, which affects labor.
- Base depth and edge detail: premium base and bordered edges cost more and last longer.
Our written estimate is line-item: tear-out, base, asphalt, haul-off, and any border. What it typically does not include is sealing (priced separately) or landscaping repair along the edges. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy Homes Specifically Do to This Job
Murphy is a small, largely built-out Collin County suburb, ZIP 75094. Nearly all the work here is renovation and infill on lots subdivided and built out in the 1980s through 2000s. That means we’re working on an occupied home in a tight, fully developed neighborhood, fitting crews, dumpsters, and material staging onto narrow suburban lots with no vacant parcels to absorb the mess. The housing stock, brick-veneer slab homes with composition roofs, sits on expansive blackland clay that swells and shrinks with the wet-dry cycle. That clay movement is why so many Murphy drives heave and crack at the apron and along the edges. We plan base depth around it and warn you when a simple overlay won’t hold.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Murphy

Most residential drives take two working days: tear-out and base prep on day one, binder and finish course on day two. Larger or steeper drives can run to three days. Call (844) 560-0925 for a firm timeline after we see the site.
Often yes, and HOA rules apply in many Murphy neighborhoods. We confirm what your city and HOA require before work starts and pull permits where needed. Call (844) 560-0925 to sort out the paperwork.
Only if the base is still sound. If the drive is spider-cracked or heaving from clay movement, an overlay won’t last and full replacement is the smarter spend. We tell you which one you’re looking at in the estimate. Call (844) 560-0925 to schedule it.
A full asphalt driveway runs $3,500 to $9,000, and resurfacing over a sound base costs less than full replacement. Call (844) 560-0925 for an exact quote, and estimates are free.
Every job is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Call (844) 560-0925 with any questions.
Get a Free Asphalt Estimate in Murphy
Call (844) 560-0925 for a free on-site estimate on asphalt driveways and resurfacing in Murphy. A live person answers around the clock. We’ll measure the drive, check the base and drainage, and hand you a written line-item quote with no surprises. It’s part of our full Driveway & Pavers in Murphy scope, and you can see the whole range on our Driveway & Pavers page. We cover all of Murphy, and some homeowners pair the job with ADU Site Prep & Utilities in Murphy when they’re adding a structure.
Written by the team at Groundwork Construction Co.












