







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Garland: What the Job Really Involves
Cabinets & Countertops in Garland typically run $14,000 – $45,000 for a full tear-out and replacement, and a standard kitchen takes three to five weeks from demo to final caulk – the cabinets alone land at $4,000 – $13,000 and the countertops at $2,000 – $6,500. Call (844) 560-0925 for a free on-site estimate. Most of the homes we work in here are 1950s – 70s ranches, and that build era shapes every part of the job, from how the boxes are scribed to the walls to whether the old counters come out in one piece or five. We measure, quote in writing, and tell you what we find in the wall before anyone swings a hammer.

How We Run a Cabinet and Countertop Job, Stage by Stage

There’s a real sequence to this work, and skipping a step is how a “two-week job” turns into two months of callbacks. Here’s what actually happens.
Stage 1: Template and field measure (day 0, about 2 hours)
Before anything gets ordered, we measure the actual room, not the plan. In Garland’s older stock, that means checking for out-of-square corners, bowed walls, and floor dips that will show up under a new countertop. You’ll need to decide your cabinet line and door style by this point, because lead times start at order. KraftMaid is a partner line we stock through, and its lead times are usually four to six weeks.
Stage 2: Demo and prep (days 1 – 2)
Old cabinets and counters come out, along with the backsplash and any damaged drywall. This is where surprises live. We check the shutoffs under the sink, confirm the range hood vent is actually venting outside, and level the floor if it won’t sit true. You don’t have to decide anything here – this is us finding out what we’re really working with.
Stage 3: Rough-in and wall work (days 2 – 4)
If the layout changes, this is when plumbing and electrical get moved, and if any wall is load-bearing, it gets framed and inspected. Cabinets that go back where the old ones were skip most of this. You’ll confirm final outlet and switch placements at the walk-through on day 2.
Stage 4: Cabinet install (days 5 – 7)
Base and wall boxes get set, shimmed, and screwed to studs. Crown and light rail go on. Doors and drawers get hung and adjusted. This is the stage that makes or breaks the look, and it’s hand work, not a hydraulic lift and a wave. You’ll want to be reachable for the appliance fit check on the last day of install.
Stage 5: Template, fabricate, and set the countertops (days 8 – 18)
Once the boxes are final, the countertop fabricator templates with a laser or physical jig. Slab fabrication runs seven to ten business days. Then the tops get set, the sink gets undermounted and sealed, and the final plumbing connection happens. You’ll pick the slab edge profile before templating – after that it’s locked. Most jobs in Garland land in the three-to-five-week window end to end, and the countertop lead time is the one variable that can push a good schedule out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between (and What Each Really Costs You)
Every kitchen has three real decisions: cabinet construction, countertop material, and whether the layout changes. Here’s the honest version of each.
- Stock/ready-to-assemble cabinets – the low end of the $4,000 – $13,000 band. Faster lead times, fewer size options, particleboard boxes on most lines. Fine for a flip or rental. Won’t love a 20-year run in a busy family kitchen.
- Semi-custom (KraftMaid, similar) – where most Garland homeowners land. Plywood boxes, custom sizing, real door styles, four to six week lead. The sweet spot for value against longevity.
- Frameless (European) vs. face-frame – frameless gets you more usable interior space; face-frame hides more install sins in an older room. In a 1960s ranch with an out-of-square kitchen, face-frame is often the forgiving choice.
- Laminate counters – bottom of the $2,000 – $6,500 range. Best budget-per-square-foot, but hot pans and Garland’s summer kitchen heat will test it. Resealing seams isn’t a thing; replacing is.
- Quartz – the most-requested solid surface for our jobs. Non-porous, holds up to Texas humidity swings, doesn’t need sealing. Costs noticeably more per square foot than laminate and still less than most natural stone.
- Granite and natural stone – slab variety is the draw, and every slab is a one-off. Needs periodic sealing and careful seam placement. Good fit if you want visual heft and don’t mind maintenance.
- Butcher block – warmest underfoot, cheap per square foot, and it will show water rings if you don’t keep it oiled. Best for island tops and baking stations, not full kitchen runs.
If the layout is changing, add a plumbing line item and, more often than not, an electrical one. Keeping the sink and range where they are is the single biggest cost saver in this job.

What Cabinets & Countertops Cost in Garland, TX

A full cabinet and countertop replacement in Garland runs $14,000 – $45,000. That’s a wide band on purpose – the spread has everything to do with the five variables below, not with which contractor you call.
- Kitchen size and cabinet run: a compact 10×10 galley sits near $14,000; a 200-square-foot kitchen with an island pushes into the high $30s and beyond.
- Layout changes: keeping the sink and range in place is the cheapest path. Moving them adds plumbing and electrical, often $1,500 – $4,000 in rough-in plus inspection.
- Material grade: stock cabinets and laminate at the low end; semi-custom and quartz in the middle; custom boxes and natural stone at the top.
- Room condition: out-of-square walls, bad floors, or old galvanized plumbing that needs replacing all add prep time and money.
- Permit scope: a like-for-like swap usually doesn’t need a permit; relocating plumbing, moving a wall, or adding electrical does, and the inspection schedule adds a week.
Your written estimate should list cabinets by line and size, countertop material by square foot, install labor, demo and haul-off, and any rough-in trades. It should not bury the backsplash or final plumbing in a “miscellaneous” line. What typically isn’t included: new appliances, the backsplash tile itself (we install it, but you may pick and buy it), and any foundation work the house needs before install. We quote it all line by line, and the number you sign is the number you pay. Our 0% financing for 18 months and $1,000 off projects over $10,000 both apply to this job.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland went up almost entirely in one postwar build-out, so nearly every kitchen we touch is a 1950s – 70s ranch with original framing, original plumbing, and cabinets that have been through more remodels than the tax records show. That matters in three concrete ways. First, the rooms are rarely square – 60-year-old studs settle, and a slab-on-grade ranch here often sits on the expansive black clay that runs under this part of North Texas, so floors move and counters follow. Second, the plumbing and wiring are usually past their service life, and a simple cabinet swap tends to surface a galvanized line or an undersized circuit that has to be fixed before the new boxes go in. Third, permitting here runs through older Garland platting on already-built-out lots, not new-construction review, so plan for a slower, more paper-heavy process if the layout changes. We cover Garland ZIP codes 75049, 75040, 75041, and 75042, and we see this in every one of them. If the kitchen is part of a bigger overhaul, homeowners often pair this with our Kitchen Remodeling in Garland scope, or with a Garage Conversion ADU in Garland when the old garage is where the extra living space is going. We also handle a New Detached ADU in Garland when the plan is a backyard build rather than a gut renovation, and the same crew mindset carries into our Kitchen Remodeling work across the region.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Garland

A full tear-out and replacement runs three to five weeks. The cabinet line and countertop lead times are the pacing items, and custom or natural stone tops add a week or more. Call (844) 560-0925 to get a schedule for your kitchen.
Like-for-like replacement usually doesn’t require one. Moving plumbing, relocating electrical, or taking out a wall does, and we pull those permits and pass the inspections. Call (844) 560-0925 and we’ll tell you what your specific layout needs.
Yes, and it’s the most common and most affordable path. Keeping the sink and range where they are avoids rough-in trades and cuts the job down to cabinets, tops, and finish work. Call (844) 560-0925 if you’re weighing a layout change against the cost.
Full replacement runs $14,000 – $45,000, with cabinets $4,000 – $13,000 and countertops $2,000 – $6,500 on their own. Kitchen size, material grade, and layout changes drive the spread. Call (844) 560-0925 for an exact written quote – estimates are free.
Yes, every install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it follows the cabinets and tops we set in Garland. Call (844) 560-0925 to schedule your estimate.
Get a Free Cabinets & Countertops Estimate in Garland
We’ll come out, measure the actual room, and hand you a written line-item quote for cabinets, countertops, install, demo, and any rough-in trades, so nothing shows up later as a surprise. You’ll know exactly what the job costs and how long it takes before you commit. Call (844) 560-0925 to schedule your free estimate in Garland and we’ll walk your kitchen with you.
Written by the team at Groundwork Construction Co.












