







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Garland, TX: What You’re Actually Buying
Paver driveways in Garland, TX run $7,000 – $18,000 for a typical two-car drive, and most jobs take 4 to 7 working days from demo to final joint sand. The scope is a full excavation and rebuild: tear out the old slab or surface, compact a graded base, set the pavers on a sand bed, then cut, edge-restrain and seal. Call (844) 560-0925 to schedule a free on-site estimate – we measure the drive, check the base and give you a written line-item quote.

The Process, Stage by Stage

Paver work lives or dies on what’s under it, so the first day is almost all base work, not stone.
Stage 1: Site walk and layout (about an hour, day 1)
We mark the drive’s edges, confirm the slope away from the garage slab and the street, and locate the utility lines before anything gets cut. You’ll decide the paver pattern and border color here – that decision drives the whole material order, so it happens before we dig.
Stage 2: Demo and haul-off (day 1 into day 2)
Old concrete or asphalt comes out, along with any failed base underneath. On Garland’s older lots, this is also where we find out how much of the existing base is salvageable. Expect dumpsters on-site and a full day of noise.
Stage 3: Excavation, grading and base compaction (days 2 – 3)
We excavate to depth, lay and compact the aggregate base in lifts, then check grade with a laser. This is the stage that keeps your driveway from settling in three years. Nothing gets covered until the base passes inspection on compaction and slope.
Stage 4: Paver setting, cutting and edge restraint (days 3 – 5)
Pavers go down in the pattern you chose, field cuts run along the edges, and a restrained edge locks the field in place. This is where the driveway starts to look like the rendering.
Stage 5: Joint sand, cleanup and final walkthrough (days 5 – 7)
Polymeric joint sand goes in, the surface gets swept and compacted, and we walk the finished drive with you. You sign off only when the grade, the cuts and the finish all read right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the budget and the look get decided in two conversations: which paver, and which base system. Here’s the honest version of each option.
- Concrete pavers (interlocking): The workhorse for Garland drives. Dense, freeze-tolerant, and the one material that lets you lift and reset a section without replacing the whole drive. Expect the middle-to-upper end of the $7,000 – $18,000 range.
- Clay brick pavers: Warmer color, strong curb appeal on a brick-veneer ranch, and it ages well. Heavier, slower to install, and it lands near the top of the range.
- Permeable pavers: Worth considering where runoff puddles at the apron. They cost 10 – 20% more than standard concrete pavers but handle heavy rain far better.
- Base depth and compaction: The single biggest quality lever. A shallow base is cheap and fails in a couple of seasons; a properly compacted deep base is why the drive stays flat.
- Edging and border: A restrained border holds the field together and looks finished. Skip it, and edges wander within a couple of years.
What Paver Driveways Costs in Garland, TX
Paver driveway installation in Garland runs $7,000 – $18,000 for most homes, and a driveway replacement with pavers typically lands $5,000 – $14,000 depending on size and base condition. The number is driven by a handful of real variables:

- Square footage: A single-car drive and a long double drive differ by thousands before any material upgrade.
- Existing base condition: A failed slab means full excavation and haul-off; a sound surface can sometimes be prepped instead.
- Material grade: Concrete pavers sit at the low-to-mid end, clay brick and permeable systems push toward the top.
- Site access: Tight lots and long runs mean more manual handling and slower days.
- Drainage and grading: Correcting slope or adding a French drain adds scope and cost, but skipping it is a guarantee of pooling.
A written estimate should spell out square footage, base depth, paver brand and color, edge restraint, joint sand and haul-off. What’s often left out elsewhere: drainage correction, utility locating, and disposal fees. We put all three in writing. For the wider scope, this work is usually part of a full Driveway & Pavers in Garland plan, and homeowners often pair this with Cabinets & Countertops in Garland while the crews are already on-site.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland is a postwar first-ring suburb, and its housing stock went up in a single 1950s – 70s build-out. That means most of our paver driveway work here is a rebuild on an already-built-out lot, not a fresh install on new ground. The old drive is usually a cracked slab that has already taken decades of North Texas black-clay movement. That expansive clay swells and shrinks with the wet-dry cycle, and it doesn’t stop at the foundation – it eats driveways too, which is why so many Garland drives show heaved panels and dips near the apron. On the older slab-on-grade ranches in the 75040 and 75041 ZIPs, base prep is where the money goes, and a proper deep compacted base is what keeps the new pavers flat. Hail and high summer heat also stress the surface and the seal. We cover the whole city, from the brick-veneer streets off Broadway to the ranch blocks near the 75042 corridor – see our Garland service area page for the full picture.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Garland

Most paver driveways in Garland take 4 to 7 working days, weather permitting. Demo and base work take the first two to three days; setting, cutting and joint sand fill the rest. Rain pushes the schedule, especially at the compaction stage. Call (844) 560-0925 and we’ll give you a realistic start and finish date for your drive.
Garland typically requires a right-of-way or driveway permit when the work touches the curb, apron or street approach, and we handle that filing for you. Interior drive work on your own lot often doesn’t need one, but the rules depend on the lot and the plat. We confirm what applies to your address before we start. Call (844) 560-0925 for a free estimate and permit check.
Only when the existing base is sound and the grade allows it; most Garland drives fail that test. A cracked, heaved or poorly drained slab has to go, because pavers laid over a failing base will mirror those failures within a season or two. We’ll tell you straight at the estimate whether an overlay is viable or a full rebuild is the honest call.
Paver driveways in Garland cost $7,000 – $18,000, with driveway replacement with pavers typically $5,000 – $14,000. The final number moves with square footage, base condition, paver type and drainage. Every quote is line-item and upfront, with $1,000 off projects over $10,000 and 0% financing for 18 months available. Call (844) 560-0925 for an exact quote – estimates are free.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship, base prep and setting. Paver manufacturer warranties stack on top for the material itself. Call (844) 560-0925 to talk through coverage for your drive.
Get a Free Paver Driveway Estimate in Garland
We’ll come out, measure the drive, check the base and grade, and hand you a written line-item estimate for paver driveways in Garland – no pressure and no vague numbers. Call (844) 560-0925 and a live person answers any hour; we’ll book your free on-site estimate at a time that works. You can also pair this with Door Installation in Garland or our Driveway & Pavers service. Upfront pricing, no surprises.
Written by the team at Groundwork Construction Co.












