A Groundwork company - serving Carrollton, TX
A backyard with a new horizontal privacy fence
Chain Link Fence · Garland, TX

Chain Link Fence in Garland - Written Price Per Foot, Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Carrollton
A new black aluminum pool fence with a gate
A new wood side gate with black hardware
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new paver pool deck
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

A chain link fence in Garland usually runs $3,500 to $9,000 for a standard residential yard, depending on linear footage, height, gauge, and whether the line is being replaced or set new. Most residential jobs are finished in two to three days once we’ve marked utilities and pulled the required permits. The wind and hail that roll through North Texas punish anything flimsy, so the frame and footing matter more here than the mesh itself. Call (844) 560-0925 for a free on-site estimate and a written, line-item quote.

Professional construction crew installing a new residential wood fence in Garland, TX

Call (844) 560-0925

A new stained cedar privacy fence

Fencing looks simple from the street. The reason a chain link line lasts twenty years instead of eight is what happens below grade, and that’s where a Garland job lives or dies. Here’s how we run it, and what you’re deciding at each turn.

Stage 1: Site walk and utility locate

We walk the property line with you, confirm exactly where you want the fence, and mark the layout. Then we call for utility locates before anyone puts a shovel in the ground. In a built-out suburb like Garland, water and gas lines to older homes don’t always run where the plat drawing says they do. This stage takes a day or two of waiting on locates, and it’s the step where you decide dimensions and gate placement.

Stage 2: Demo and prep

If there’s an existing fence, we pull it out, haul off the old posts and panels, and clear the line. On Garland’s older lots, that often means dealing with fence posts set right against a slab edge, overgrown root systems, or a line that has wandered off the property boundary over the decades. This is a half-day to a full day depending on what’s there and how much concrete has to come out.

Stage 3: Holes and setting posts

We auger the post holes to depth, set the terminal posts (corners, ends, gates) in concrete, and let them cure before we hang any fabric. Terminal posts carry the tension of the whole run, so they get set deeper and heavier than line posts. This is the stage where wind rating and footing depth are locked in. You’re not making many decisions here, but you’re paying for the part of the job you’ll never see again.

Stage 4: Framing and fabric

Top rail, tension bands, and the chain link mesh itself go up next. All the tensioning and bracing happens here. How straight the top rail runs and how tightly the fabric is stretched is the difference between a fence that looks built and one that looks assembled. Most residential runs take a day at this stage.

Stage 5: Gates, hardware, and walkthrough

Gates get hung, latches and hinges set, and we do a full walkthrough with you. Gate swing, tension, and alignment are checked against the actual ground, which on older Garland slabs and piers is never perfectly level. Any adjustment happens before we leave. This is your chance to flag anything before final payment and the workmanship review.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Chain link isn’t one product. The spec you pick drives both price and how the fence behaves in a Garland storm season. Here’s what actually matters:

  • Height: 4-foot is the standard for keeping pets and kids in. 6-foot is the norm for property definition and security. Going taller means heavier posts and more concrete, and the price steps up noticeably.
  • Wire gauge and coating: Residential mesh comes in lighter and heavier gauges. Heavier gauge resists sagging and impact damage. Galvanized mesh is the budget choice; vinyl-coated (usually green or black) costs more but holds color and blends into landscaping. Cheap light-gauge mesh is what you’re replacing in a decade.
  • Post and rail weight: The frame is the wind-load story. Heavier terminal posts and rails with proper bracing are what keep a fence standing when a North Texas gust front hits. This is the trade-off most homeowners don’t think about until the fence is already leaning.
  • Fabric style: Standard chain link, or a “privacy” configuration with slats woven through. Slats add cost and wind resistance concerns, so if privacy is the priority, that shifts the conversation.
  • Gates and accessories: Single walk gates versus double drive gates, self-closing hinges, and whether you want a top rail or a top-tension wire run. Each gate is hardware you’re buying and maintaining.

The honest trade-off: going heavier everywhere costs more up front and saves you a rebuild in a decade. The cheap spec is the one that ends up on the ground after a bad storm.

Typical residential chain link in Garland lands between $3,500 and $9,000. A small yard with a standard 4-foot line and one gate sits at the bottom of that range. A larger lot, 6-foot height, heavier gauge, vinyl coating, and multiple gates push toward the top. What moves the number in practice:

professional fence installation service in Garland, TX
  • Linear footage: The single biggest driver. Price scales with total run length.
  • Height and gauge: Taller and heavier spec means more steel and more concrete.
  • Existing fence removal and concrete: Old posts set in concrete have to come out and get hauled. That’s labor and disposal.
  • Terrain and obstructions: Slopes, tree roots, and fences tight against a slab edge add labor.
  • Permit scope: Height thresholds and placement rules can trigger a Garland permit, which adds time and cost.

A written estimate should spell out linear footage, height, gauge, coating, post spacing, gate count, demo, and disposal line by line. What typically isn’t included: cutting and removing large trees, repairing a sagging slab the posts would sit against, or moving utilities. We flag those up front so the number you see is the number you pay. Our technicians have up to 12 years of experience on fence runs across Garland.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Garland Homes Specifically Do to This Job

Garland is a postwar first-ring suburb, and its whole housing stock went up in one 1950s – 70s build-out. That means we’re almost never fencing a new lot. We’re replacing fences on older single-family lots that are already built out, on 1950s – 70s ranch homes and brick-veneer tract houses across ZIP codes 75040, 75041, and 75042. Older lines have often wandered off the property boundary over decades, and utility placement doesn’t match the plat, so the locate and layout stage earns its keep here.

The expansive North Texas black clay under Garland’s older slabs is the real local variable. It swells and shrinks through the wet-dry cycle, and a fence post set in that soil can shift seasonally in a way it wouldn’t on stable ground. That’s why footing depth and proper concrete matter here. It’s also why the sprawling new-construction suburbs further out on the tollways don’t see the same fence line movement we do in Garland. When you’re already talking structure, homeowners often pair this with ADU Site Prep & Utilities in Garland or broader work, since the same ground conditions come up across both jobs. This is part of a full Fence Installation in Garland picture, and you can see our full Fence Installation service for other fence types. We cover all of Garland and the surrounding area, and on exterior work like this we pair with Door Installation in Garland when a project runs across the whole exterior envelope.

Serving Garland, TX – Our Local Coverage Area

We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

New architectural shingles with a clean valley

Call (844) 560-0925 to schedule a free on-site estimate for your chain link fence in Garland. We’ll walk the property line, check utility placement, confirm height and gauge against your lot, and hand you a written, line-item quote with no-hassle upfront pricing. A live person answers around the clock. Estimates are free, and there’s $1,000 off projects over $10,000.

Written by the team at Groundwork Construction Co.

Why Garland Chooses Groundwork Construction Co. of Carrollton

We set the standard for chain link fence in Garland.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Garland

Getting your chain link fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your chain link fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chain link fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Garland Customers Say

Trusted by homeowners across Garland and surrounding areas.

★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porch

More services in Garland

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Carrollton

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Carrollton team

A local vetted partner works across Carrollton and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Chain Link Fence in Garland?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Garland.

(844) 560-0925

Request a Free Estimate in Garland

Tell us about your chain link fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch