







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Allen, TX: What It Costs and How Long It Takes
Concrete driveways and concrete work in Allen typically run $4,500 to $12,000 for a full driveway installation, and most residential pours take 2 to 4 days from demo to the day you can park on it. A replacement where the old slab gets torn out lands in the $5,000 to $14,000 range. The variables that move that number most are square footage, how much old concrete has to come out, and whether the subgrade needs correction. Call (844) 560-0925 for a free on-site estimate and a written line-item quote.

How We Sequence Concrete Driveways & Concrete Work in Allen
Concrete is unforgiving of shortcuts. The pour is the shortest part of the job; the prep underneath is where the driveway either lasts thirty years or cracks in the first two. Here’s the order we work in.
- Day 1 – Walkthrough, layout and utility locate. We confirm the width, slope and tie-in to the garage apron, then call in the 811 utility locate before anyone touches a saw. Missing a sprinkler main or a gas stub here is the most expensive mistake on the job.
- Day 1-2 – Demolition and haul-off. Old slab comes out by saw and skid-steer, loaded and hauled the same day. A standard two-car drive takes four to six hours with a clean crew. You decide here whether the old base material stays (if it’s sound) or gets replaced.
- Day 2 – Subgrade prep and forming. We cut down to virgin clay where the old base is compromised, compact in lifts, and set forms to a minimum 2% slope away from the structure. This is the stage Allen’s expansive clay makes the most difference: a slab poured over soft, wet fill will heave within a season.
- Day 3 – Rebar, vapor barrier and inspection. #3 or #4 rebar on a grid, a 6-mil vapor barrier underneath, and a pre-pour inspection before concrete arrives. This is when you confirm the finish (broom, exposed aggregate, saw-cut joints) and the joint layout.
- Day 3-4 – Pour, finish and cure. Concrete goes down as a single pour, gets floated and finished, and joints get cut within 24 hours. You can walk on it in about a day and drive on it in seven. Full cure takes 28 days, but that’s behind the scenes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before We Pour
Concrete isn’t one product. The finish and reinforcement you choose changes both the cost and how the drive handles North Texas weather.
- Plain broom finish vs. exposed aggregate. Broom is the workhorse – cheapest, best traction, easiest to maintain, and it hides minor surface wear. Exposed aggregate costs roughly 15-25% more but reads as a design feature and stays cooler underfoot.
- Standard gray vs. integral color. Adding integral color runs about $1 to $3 per square foot more. It’s the practical choice if you want an upgrade that doesn’t add a maintenance cycle.
- 4-inch vs. 5-6 inch slab thickness. Most residential drives are poured 4 inches. If you regularly park a heavy truck, an RV, or you’re widening the apron, going to 5 or 6 inches with tighter rebar spacing costs more but prevents the edge failures we see on thicker-vehicle drives.
- Control joint layout. Saw-cut joints need to land every 8-10 feet and at every inside corner. Getting this right is free at the pour stage and expensive to fix later – poorly laid out joints are where most Allen driveways crack.
- Drainage approach. A proper slope away from the garage is non-negotiable. Where the grade won’t cooperate, a channel drain or a small culvert adds cost but prevents water pooling against the slab and the foundation.
What Concrete Driveways & Concrete Work Cost in Allen, TX

For planning purposes: a standard two-car concrete driveway installation in Allen runs $4,500 to $12,000. A full replacement where the old slab is demoed and hauled is $5,000 to $14,000. Here’s what pushes a job toward the low or high end:
- Square footage. A standard 20×20 two-car drive sits around 400 square feet. A 3-car drive or one that runs back to a detached garage can be 700-900 square feet, which alone moves the price $2,000-$4,000.
- Demolition and haul-off. Tearing out old concrete adds $1,500 to $3,500 depending on thickness and access. If a fence has to come down or a gate has to come off to get equipment in, that adds time.
- Subgrade correction. Allen’s expansive clay sometimes needs over-excavation and re-compaction, or a lime-stabilized base. That’s the biggest variable most contractors don’t mention until they’re on site – we quote it upfront.
- Finish upgrades. Exposed aggregate, integral color, or a stamped border (if you’re running a stamped pattern on a walk, we handle that separately) each add to the base number.
- Permit and inspection scope. New driveways and driveway widenings in Allen require proper right-of-way and drainage considerations; the permit and inspection line item gets built into your written quote, not tacked on later.
Our written estimate is a line-item quote: demo, haul, prep, rebar, vapor barrier, concrete, finish, joints, cleanup. The number you see is the number you pay, backed by 0% financing for 18 months and $1,000 off projects over $10,000. If your concrete work is part of a full Driveway & Pavers in Allen scope, we’ll quote it as a single project.
See the difference
Before
After
Before
After
Before
AfterWhat Allen Homes Specifically Do to Concrete Work
Allen grew from a small rural town into a Collin County suburb starting in the late 1980s, and most of its housing stock landed in a narrow band between roughly 1990 and 2015. That means a large share of the driveways we see here are original pours now hitting 25 to 30 years old – first-cycle replacement work, not patching. Between the expansive black clay underneath and the wet-dry cycle, driveways that looked fine in a wet spring often show heaving cracks, spalling, or settled slabs by August. We see this constantly in the master-planned subdivisions off Exchange Parkway and along the US-75 corridor in 75013, and in the older neighborhoods around 75002. Foundation and drainage correction is a normal part of the conversation here. Homeowners frequently pair a driveway replacement with drainage correction, and homeowners often pair this with ADU Site Prep & Utilities in Allen when a detached unit is going in and the drive needs to extend to it. Whether you’re in one of the newer townhome infill projects or a 1990s brick-veneer single-family, we cover Allen end to end.

Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Allen

Most residential concrete driveways in Allen take 2 to 4 working days from demo to pour-and-finish, plus a 7-day wait before you drive on it. Larger drives, tear-outs with tough access, or subgrade corrections can push it to 5 days. Call (844) 560-0925 for a timeline based on your actual property.
New driveway construction and driveway widenings that touch the right-of-way typically require a permit in Allen, and we pull it and coordinate the inspection before the pour. We don’t ask you to navigate the city’s permit counter – it’s built into your written quote. Call (844) 560-0925 to confirm what your specific project needs.
Occasionally, if the existing slab is structurally sound and the new pour can go over it with a proper bonding layer – but on the 25-30 year old Allen slabs we typically see, tear-out is almost always the right call. Pouring over failing concrete just transfers the crack pattern to the new surface. We’ll tell you honestly which you’re looking at, and the estimate is free.
A broom finish over a properly prepped, rebar-reinforced slab with well-placed control joints holds up best in Allen’s climate. Exposed aggregate and integral color are both good upgrades that don’t add a maintenance cycle. What matters more than finish is the subgrade and slope – get that wrong and no finish saves it.
Every concrete driveway and concrete pour we do in Allen is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s a written two-year workmanship guarantee, one of the longest in the residential construction space, and our technicians bring up to 12 years of experience to the pour. Call (844) 560-0925 for details.
Get a Free Concrete Estimate in Allen
If you’re pricing a concrete driveway in Allen, start with a free on-site estimate. We’ll walk the driveway, check the subgrade and slope, and hand you a written line-item quote with no surprise change orders. Call (844) 560-0925 – a live person answers around the clock, not a voicemail box, and we’ll book your estimate on the call. Our Driveway & Pavers team handles the whole scope if the project grows into walks, a patio, or a Door Installation in Allen while the crew is out. Groundwork Construction Co. brings background-checked, uniformed technicians to every job and stands behind the work with the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












