







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Highland Park, TX: What the Job Actually Involves
A chain link fence in Highland Park, TX typically runs $3,500 – $9,000 for a residential run, and most jobs are measured, permitted through the Town of Highland Park, and installed within two to three weeks of the estimate. We handle the survey, the town’s plan review, the posts, and the gates. To line up a free on-site measurement, call (844) 560-0925 and we’ll schedule a walk of your property.

How We Build a Chain Link Fence Here, Stage by Stage

Every job follows the same five stages. Here’s the real sequence, so you know exactly what to expect and where your decisions fall.
Stage 1: Site walk and control-line survey (day 1). We locate the property line against the plat and figure out where the fence can sit without crossing into a neighbor’s land or a town setback. In a fully built-out enclave like this, lines don’t get argued about later, so we confirm them before anything else. You decide the fence run and gate locations at this stage.
Stage 2: Permit application (days 2 – 10, on the town’s clock). We submit to the Town of Highland Park’s own permitting office, not Dallas. Expect town plan review to move at its own pace. You don’t have to do anything here except sign the application we prepare.
Stage 3: Layout and marking (day of install, morning). We mark posts with paint, call in utility locates where the run crosses buried lines, and confirm the gate swing clears your driveway apron and any existing landscaping. Layout takes a few hours on a typical residential run.
Stage 4: Setting posts and framing (day 1 of install). Terminal posts, line posts, and corner posts go in first, set in concrete and plumbed. You choose line-post spacing and post diameter when we quote; those two numbers control how much the fence sways under wind and load.
Stage 5: Stretching mesh, hanging gates, final walk (day 2 of install). We tension the fabric, hang and adjust gates, install the top rail and tension bands, then walk the whole fence with you. Any gate sag or tension adjustment gets handled on the spot. Most residential runs finish in two working days once the material is staged.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link isn’t one product. The choices below are the ones that move price and longevity on a Highland Park property.
- Galvanized vs. vinyl-coated mesh. Standard galvanized steel is the value pick and holds up fine in North Texas. Vinyl-coated (usually black or green) runs roughly 15 – 25% more and blends far better against landscaping and brick. On the architecturally significant homes here, coated mesh is usually the right call.
- Post diameter and gauge. Residential runs typically use 1-5/8″ line posts with a heavier terminal post at corners and gates. Thicker walls and larger-diameter terminals cost more but resist the wind sway that comes with tall runs on open lots.
- Fence height. Four feet is standard; five and six feet are common where privacy or pets are the driver. Height adds material cost and, past a certain height, can pull in additional town review.
- Gate type and hardware. Walk gates with self-closing hinges cost more than a basic swing gate but matter near a driveway. Drive gates, whether single or double, are a real cost driver and should be quoted separately so the numbers stay clear.
- Top rail and tension system. A top rail with proper tension bands and a bottom tension wire is what keeps mesh from sagging. Skipping it saves a little upfront and costs you a decade of droop.
Brands like Cover and Dvele come up when homeowners are pairing fence work with a prefab or accessory structure on the same lot. The fence itself is most often specified by gauge and coating, not by brand.
What a Chain Link Fence Costs in Highland Park, TX
Plan on $3,500 – $9,000 for a residential chain link fence in Highland Park, with the low end being a shorter galvanized run and the high end being a longer vinyl-coated run with drive gates. What pushes you toward the high end:

- Linear footage and gate count. Length is the single biggest variable. A long boundary run with two or three gates lands near the top of the range.
- Coating and gauge. Vinyl coating and heavier post walls add material cost.
- Terrain and access. High-water-table spots, slopes, or tight alley access (more on that below) can add labor.
- Removal of an existing fence. Tear-out and disposal is quoted as a line item, not folded into a vague lump.
- Permit and survey scope. Town review and any required survey work go in the written estimate.
Our written estimates are line-item and itemized: mesh, posts, gates, hardware, removal, and permits each show a number, and the number you see is the number you pay. What’s typically not included and will be called out separately: utility relocation, landscaping repair after install, and any survey the town requires beyond our control-line check. No-hassle upfront pricing means no change orders for work we already quoted.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Do to This Job
Highland Park is its own permitting world. The town runs its own municipal plan review, zoning, and inspection regime rather than Dallas codes, and it enforces lot-coverage and impervious-cover limits plus strict tree-preservation rules. That means a chain link run near a heritage tree or a lot line can trigger a re-survey and re-plan mid-project, so we build in that possibility from the start. The housing stock makes it real: 1910s – 1930s Tudor, Colonial, Mediterranean, and Prairie homes sit on tight lots, and the teardown-rebuilds and additions happening on streets like Beverly and Armstrong are alley-accessed with almost no room for material staging. We sequence deliveries tightly for exactly that reason. Add North Texas clay soils and the wet-dry heave that comes with them, and post footings need to be set deep and concrete-poured rather than surface-anchored. On pier-and-beam properties we check the surrounding grade before layout. If your project is part of a full Fence Installation in Highland Park scope, we coordinate the chain link phase with the rest of the exterior work.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Highland Park

Most residential chain link fences in Highland Park finish in two working days on site once material is staged, with two to three weeks total end-to-end when you include town plan review and permit issuance. The install itself is fast; the town’s review clock is the part that sets the schedule. Call (844) 560-0925 for a timeline based on your specific run.
Yes. Fence work in Highland Park goes through the Town of Highland Park’s own permitting and plan review rather than Dallas, and height, setback, and lot-coverage rules all factor in. We prepare and submit the application for you and coordinate the inspection. Call (844) 560-0925 and we’ll walk through what your property will need.
In most cases yes. Post holes are set at specific intervals and we call in utility locates before layout, so we can route around buried lines and existing structures. Where a run genuinely conflicts with a utility or a tree root zone, we plan post spacing around it rather than through it. Call (844) 560-0925 to schedule the site walk that confirms it.
Expect $3,500 – $9,000 for a typical residential run in Highland Park, and the per-foot figure depends heavily on coating, gauge, height, and gate count. A shorter galvanized run prices far lower than a long vinyl-coated boundary with drive gates. Call (844) 560-0925 for a line-item written estimate – the on-site estimate is free.
Every chain link fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on install, gate hang, and tension. If a gate sags or mesh loosens within that window, we return and correct it. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform.
Homeowners often pair fence work with ADU Site Prep & Utilities in Highland Park or Door Installation in Highland Park when a bigger exterior project is underway. Our Fence Installation service covers the full range of fencing if you’re weighing chain link against another material, and you can see every job we handle across Highland Park on the service-area page.
Get a Free Chain Link Fence Estimate in Highland Park
Call (844) 560-0925 to schedule a free on-site estimate for your chain link fence. We’ll walk the property, confirm the run and gate locations, and hand you a line-item written quote covering mesh, posts, gates, removal, and the Town of Highland Park permit. No pressure and no surprises. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.












