







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in University Park, TX: What It Takes and What It Costs
Interior door installation in University Park typically runs $350 – $900 per door installed, while exterior entry and security door installation runs $1,200 – $3,500 depending on the frame condition, hardware grade, and whether the opening needs reframing. Most standard interior doors go in during a single day; entry doors usually take one to two days once the frame is prepped. Call (844) 560-0925 for a free on-site estimate, and we’ll give you a line-item number before anything gets ordered.

How We Run a Door Installation Job, Start to Finish

Door installation in a built-out enclave like University Park is mostly a sequencing problem. The house is occupied, the side yards are narrow, and there’s no room to stage materials on the lawn while the neighbor’s crew is pouring a slab next door. Here’s how the work actually moves.
Stage 1: Measure and walk the openings (day 1, about 60 minutes)
We measure every rough opening, check plumb and square, and note whether the existing frame is true. On a 1920s brick bungalow in the 75225 ZIP, frames are almost never square – settling on blackland clay sees to that. This visit is where you decide slab versus prehung, and whether you’re keeping the existing casing or replacing it.
Stage 2: Order and confirm (3 to 10 business days)
Standard interior slabs and prehung units land in about a week. Custom sizes, matching period profiles for a Tudor cottage, or a security entry door with a rolling-code opener push the lead time to two or three weeks. You approve the final spec list here, including hinge finish and lockset.
Stage 3: Demo and prep (half a day)
Old door and casing come out, the rough opening gets cleaned and shimmed flat, and any rot in the jamb or sill gets cut back and replaced. On exterior doors this is where we check the threshold and flashing, because a door that leaks usually had a bad sill long before it had a bad door.
Stage 4: Set, shim, and hang (the bulk of the job)
The unit gets set, shimmed plumb, and fastened. Interior doors get hung and checked for swing and latch alignment. Exterior units get foam, weatherstrip, and a hardware install – deadbolt, strike plate, and the smart or rolling-code lockset if you’ve chosen one.
Stage 5: Trim, finish, and walkthrough (half a day)
Casing goes back, nail holes get filled, and we walk the job with you. Every door gets opened and closed in front of you. If a latch drags or a strike needs adjustment, it gets fixed on the spot, backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Door Installation
Most of the decisions that shape a door installation in University Park come down to five choices. Here’s the honest trade-off on each.
- Prehung vs. slab. Prehung units come with the frame and are faster to install, which keeps labor down. Slabs are cheaper material but demand a true existing frame – worth it only when the casing is period-original and you want to keep it.
- Solid core vs. hollow core (interior). Hollow core runs $150 – $350 installed and suits closets and low-traffic rooms. Solid core runs $350 – $700 and kills sound transfer, which matters in the tight two-story additions common on these narrow lots.
- Steel vs. fiberglass entry. Steel holds a deadbolt well and runs $1,200 – $2,400 installed; fiberglass resists North Texas heat and hail dents better at $1,600 – $3,000. Both hold up under the summer sun that bakes west-facing doors here.
- Hardware and openers. A basic lockset is included in most quotes. Rolling-code remotes and smart deadbolts add $150 – $450 and are the choice most security-minded homeowners here make.
- Finish and profile. Paint-grade poplar keeps cost down; stain-grade oak or a period revival profile matching the original 1930s trim adds material and finishing time.
What Door Installation Costs in University Park, TX
Door installation in University Park runs $350 – $900 per interior door and $1,200 – $3,500 for a standard exterior entry door, installed. Five things push a job toward the low or high end of that range:

- Opening condition. A square, sound frame keeps you near $350 per interior door. Rotted jambs, out-of-plumb headers, or a rough opening that needs reframing add $200 – $600 per opening.
- Material grade. Hollow core sits at the bottom; solid core, steel, and fiberglass climb from there.
- Hardware. Basic knobs are cheap. Rolling-code remotes, smart deadbolts, and multi-point security hardware add real cost but real function.
- Structural or trim changes. Widening an opening, adding a header, or matching period casing is a different scope than a straight swap and gets priced separately.
- Permit scope. A like-for-like swap usually doesn’t require one; new openings or structural changes do, and that permit and inspection time lands in the quote.
Our written estimates list the door, hardware, labor, trim, and disposal as separate line items, with no-hassle upfront pricing – the number you see is the number you pay. What’s typically not included: painting or staining beyond a touch-up, and any structural work discovered once the old frame comes out. We flag those before we proceed, never after.
See the difference
Before
After
Before
After
Before
AfterWhat University Park Homes Specifically Do to a Door Installation
University Park is a built-out, landlocked Park Cities enclave where the only way to build is teardown and rebuild, so construction here lives under lot-coverage, setback, and height-limit review through HPARC – not greenfield subdivision rules. That reality shapes a door job in ways it wouldn’t in a newer suburb. Lots are often just 50 feet wide with zero-lot-line-style tight side yards, so staging materials and getting a unit through to the opening means working around parked cars, narrow driveways, and neighbors mid-renovation on either side. Original housing stock is 1920s – 1950s brick bungalows, Tudor cottages, and period revival homes, and the frames in those houses are rarely plumb – blackland clay moves with every wet-dry cycle, and a door that stuck last spring may swing free by August. Around the SMU-area streets, the dense tree canopy keeps exterior doors shaded and damp longer, which is where we see sill rot and sticking entry doors first. We routinely handle door installation across University Park in the 75225 ZIP, and we’re familiar with the access constraints that come with working between million-dollar homes on tight lots.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Door Installation in University Park

A single interior door installs in about two to three hours, and a full set of interior doors in one day. Exterior entry doors take one to two days once the frame is prepped. Call (844) 560-0925 for a scheduling window that fits your timeline.
A like-for-like door replacement in University Park usually doesn’t require a permit. New openings, widened doorways, or any structural header work do, and the town’s review adds time to the schedule. We’ll tell you up front whether your job falls into permit territory.
Yes. Straight swaps and same-size replacements – the vast majority of door installation jobs we run in University Park – don’t touch plumbing, electrical, or structure. Widening an opening is a separate scope, and we price it that way so there are no surprises.
A steel or fiberglass security entry door with a rolling-code smart deadbolt runs $1,600 – $3,500 installed in University Park, depending on the hardware and frame condition. Call (844) 560-0925 for an exact quote – estimates are free.
Every door installation we complete is backed by our 730-Day Done Right Promise – if it’s not hung right, we make it right. Manufacturers’ warranties on the door and hardware apply alongside it. Ask for the written terms at your estimate.
If your door installation is part of a bigger exterior refresh, homeowners often pair this with a full Windows & Doors in University Park scope, and a closed-in garage project is a natural fit alongside a Garage Conversion ADU in University Park. Some also bring the interior finish in line at the same time with Cabinets & Countertops in University Park. You can see our broader Windows & Doors service for the full picture, and we cover the whole of University Park with on-site estimates.
Get a Free Door Installation Estimate in University Park
Call (844) 560-0925 for a free on-site estimate on door installation in University Park. We’ll measure the openings, walk you through prehung versus slab and steel versus fiberglass, and hand you a written line-item quote with no-hassle upfront pricing. Calls are answered by a live person, 24/7. Estimates are free, and 0% financing for 18 months is available if you’re pairing doors with a larger project.
Written by the team at Groundwork Construction Co.












