







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Farmers Branch, TX: What the Job Really Costs and How Long It Takes
Cabinets & countertops in Farmers Branch run $14,000 – $45,000 for a full tear-out and replacement, and most jobs are finished in two to four weeks from demo to final caulk. The countertop template and install alone add three to seven working days because every slab is cut after the cabinets are set. Call (844) 560-0925 and we’ll walk your kitchen, measure, and put real numbers on paper.

The Build Sequence We Follow on Cabinets & Countertops

Order matters more than any other single thing on this job. Get the sequence wrong and you’re tearing out brand-new stone because a cabinet was racked a quarter inch. Here’s how it runs.
Stage 1: Measure and order (days 1 – 3)
We take field measurements of every wall, check for out-of-square corners and floor level, and confirm appliance openings. You’ll decide box construction, door style, finish, and whether you’re staying with the current footprint or shifting anything. Cabinet orders go in now. Lead times on semi-custom boxes run three to six weeks, so this is the long pole in the schedule and the reason we won’t quote a date before you’ve signed off on the layout.
Stage 2: Demo and prep (days 1 – 2 on site)
Old cabinets and countertops come out, usually in a single day with two techs. The second day is prep: patching drywall behind the uppers, checking the shutoffs under the sink, and leveling the floor where it’s drifted. In older Farmers Branch ranches this is where we find soft subfloor near the sink or a wall that’s out of plumb by more than an inch. You’ll decide then whether to correct it or shim it; correcting costs more and shows in the final cabinet reveal.
Stage 3: Cabinet set (days 3 – 5)
Base cabinets get set, shimmed, and screwed to studs, then uppers go in. This is where the kitchen starts looking like a kitchen. You’ll confirm hardware placement before we drill, because after the holes are in, that decision is permanent.
Stage 4: Template and slab install (days 6 – 12)
A fabricator templates the finished cabinet tops, cuts the slab, and returns in three to seven days to set it. Sink cutouts and faucet holes are done at the shop. You’ll pick the slab edge profile and confirm the sink before template day, not after.
Stage 5: Finish work (days 12 – 18)
Plumbing reconnects, dishwasher and disposal go back in, toe kick and filler panels close the gaps, and caulk lines get run. We do a light walkthrough with you and hand over the warranty paperwork. Inspections, where the scope requires them, get scheduled before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Nobody picks between “good” and “bad” cabinets. You pick between boxes, fronts, finishes, tops, and hardware, and each one has a real trade-off.
- Stock vs. semi-custom boxes. Stock sizes ship fast and cost less but leave filler strips at the wall. Semi-custom lets us close those gaps and is what most Farmers Branch buyers land on when they’re keeping the original footprint.
- Plywood vs. particleboard box construction. Plywood handles moisture and re-screwing better around a sink; particleboard is cheaper and fine on dry walls. We’ll tell you where each belongs rather than upselling every box.
- Painted MDF vs. solid wood fronts. Paint gives you a clean modern face and hides well; solid wood takes dings better and can be refinished later. Painted fronts need touch-up at the toe kick within a few years.
- Quartz vs. granite vs. butcher block. Quartz is non-porous and uniform; granite is natural and needs sealing once a year; butcher block is warm and cheap but wants oiling and doesn’t love a wet sink. Quartz from a name mill like Cambria is the default in most of our Farmers Branch kitchens.
- Undermount vs. drop-in sink. Undermount looks cleaner and makes counter wiping easy, but it’s glued and clamped to the stone and needs a solid cabinet base. Drop-in is simpler to swap later.
- Soft-close and drawer organizers. Cheap add-on, big daily difference. Worth the money on every drawer you’ll open 15 times a day.
What Cabinets & Countertops Costs in Farmers Branch, TX
Plan on $14,000 – $45,000 for cabinets and countertops together, with a full kitchen remodel in Farmers Branch landing in that same $14,000 – $45,000 band when the scope is cabinets and tops only. Here’s how the line items break out.
| Line item | Range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Five things push you to the low or high end of that range. Footage and cabinet count come first. Next is existing condition: a level floor and plumb walls keep you low; a soft subfloor or out-of-square corner moves you up. Third is whether we’re moving plumbing or electrical, which adds a trade and a permit. Fourth is material grade, including that quartz tops and semi-custom boxes land higher than stock and laminate. Fifth is whether the job is part of a full kitchen remodel or a like-for-like swap.

A written estimate includes demo, disposal, cabinet set, countertop template and install, and finish plumbing. It does not include moving a gas line, new appliances, or repairing a foundation issue found mid-job unless we’ve written it in. You see the number before we lift a hammer. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Job
Farmers Branch is nearly built out, so almost every kitchen we touch is a remodel-of-existing, not new construction. That changes the job. The 1950s and 1960s ranches in ZIP 75234 were framed with narrower wall runs and put the sink under a window on an exterior wall, which means moving a sink or range often means chasing plumbing through a slab or opening a wall. On the older streets, the original one-story homes are being torn down and two-story infills squeezed onto the same lot, which makes alley access and tight-lot staging part of the schedule. And because the City of Farmers Branch runs its own permitting and inspection process, we pull permits and pass inspections with precision rather than guessing. The black-clay soil under this part of North Texas moves with wet and dry cycles, so before cabinets go down we check floor level and shim or correct rather than assuming a flat slab. We cover the whole city, and the Farmers Branch service page lays out the neighborhoods we work.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Farmers Branch

Expect two to four weeks from demo to final caulk, with the countertop template and install adding three to seven working days in the middle. Cabinet lead times of three to six weeks sit in front of that, so the planning window is usually six to ten weeks. Call (844) 560-0925 and we’ll map the schedule for your kitchen.
A straight like-for-like swap usually doesn’t need one, but anything that moves plumbing, electrical, or a gas line does. The City of Farmers Branch requires permits for those trades, and we pull them and pass the inspections for you. We’ll tell you on the walkthrough exactly what your scope triggers.
Yes. As long as the sink and faucet stay put, there’s no plumbing move, and the job stays in the $14,000 – $45,000 range. Moving the sink or range is what adds cost and schedule, because that’s when we’re opening a wall or the slab. Bring us a sketch and we’ll price both versions so you can see the difference.
Quartz is the most common pick for the mid-century ranches here because the older slab foundations aren’t perfectly level and quartz installs clean and consistent. Granite is a solid alternative if you want natural variation and don’t mind annual sealing. Laminate is the budget path. Call (844) 560-0925 for an exact quote on your slab choice.
Every job we do is covered by our 730-Day Done Right Promise: if it’s not right, we make it right. That backs the workmanship for two full years, well past the point where settling clay or a slab seam would show. Manufacturers’ warranty on the cabinets and stone runs separately and we hand you the paperwork at the final walkthrough.
Homeowners often pair this job with a Garage Conversion ADU in Farmers Branch when they’re squeezing a rental kitchenette in, or roll it into Kitchen Remodeling in Farmers Branch when the scope reaches beyond cabinets and tops. We also do full-scope work through our Kitchen Remodeling service, and add a New Detached ADU in Farmers Branch when the same lot gets a second structure. Builders like Cover and Boxabl make modular garages and studios we sometimes integrate.
Get a Free Cabinets & Countertops Estimate in Farmers Branch
Call (844) 560-0925 and a live person answers, any hour, any day. Tell us what you’re planning and we’ll set a free on-site estimate: we measure the kitchen, check floor level and shutoffs, confirm the scope, and hand you a written line-item price with no surprises. You’ll know what your cabinets and countertops cost before you commit a dollar. Upfront pricing, no guesswork, and the 730-Day Done Right Promise in writing.
Written by the team at Groundwork Construction Co.












