







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Farmers Branch, TX: What You’re Actually Signing Up For
Most paver driveways in Farmers Branch run $7,000 to $18,000, take three to six working days from demo to sealer, and hold up far better than concrete on this city’s black-clay soil. The range is wide because a narrow infill lot on a 1950s ranch and a corner property in the newer subdivisions are two different jobs. Call (844) 560-0925 and we’ll get an estimator on site for a free, line-item quote.

Stage by Stage: How a Paver Driveways Job Actually Goes

We don’t hand you a brochure and disappear. Here’s the real sequence, with the durations and the decisions that land on your side of the table.
Stage 1, site walk and layout (day 0). We measure the drive and the apron, check the slope away from the garage, and probe the base. On 75234 lots this is where we find the surprises: a 60-year-old concrete slab that’s heaved, an old walkway buried two inches down, or a drainage swale that’s been fighting the garage for decades. You get a written quote with the paver type, base depth and edging spelled out. That conversation usually takes an hour.
Stage 2, demo and haul-off (days 1 – 2). The old surface comes out, along with any failed base material. This is where tight-lot staging matters. Older Farmers Branch streets have alley access and mature trees, so we plan the dumpster and the paver pallets before the crew arrives, not after. Expect noise and a driveway you can’t park on for the duration.
Stage 3, excavation and base build (days 2 – 4). This is the part nobody sees and the part that decides whether the driveway lasts. We excavate to depth, lay and compact the aggregate base in lifts, and set the edge restraint. On this soil we run a deeper base than you’d need on stable ground. Your one decision here is base depth versus budget, and we’ll show you the trade-off in writing.
Stage 4, bedding, lay and cuts (days 4 – 5). Sand bedding goes down, then the pavers go in the pattern you picked. Border courses and cuts around the apron and walkway junctions get set by hand. You confirm the pattern and the border detail at the start of this stage, before anything is bedded.
Stage 5, compaction and sealer (day 5 – 6). We compact and sweep, then apply the sealer and joint sand. You walk the finished surface with us and sign off. Any cracked paver or failed cut gets replaced before we leave, backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Move the Needle
We’ll walk you through the options at the estimate. Here’s the honest trade-off on each:
- Concrete pavers vs. clay brick. Concrete pavers are the workhorse, hold color well and take the freeze-thaw and clay movement without cracking. Clay brick costs more and grows a patina, but it’s heavier, pricier and slower to set. For most Farmers Branch driveways the concrete paver wins on value.
- Base depth. A standard base handles most cars. A deeper base with a geotextile layer is the insurance policy on this expanding clay. It adds cost but cuts the chance you’re re-leveling in five years.
- Pattern. Herringbone and running bond are the two most common. Herringbone locks tighter under tire traffic. A simple border course adds a finished edge for a small upcharge.
- Sealer. Matte or glossy, and how often you reapply. Sealer protects color and speeds cleanup, but it’s a maintenance item.
- Edge restraint. Concrete curb versus hidden edge. The curb is visible and built to hold; the hidden edge is cleaner but needs the base to be perfect.
What Paver Driveways Cost in Farmers Branch, TX
Plan on $7,000 to $18,000 for a full paver driveway in Farmers Branch, installed and sealed. Here’s what pushes a job toward either end:

- Square footage. A single-car apron is at the bottom; a wide drive to a detached workshop is at the top.
- Existing condition. A heaved slab or failed base means more demo and more haul-off.
- Base depth and drainage. Any correction needed on this clay soil adds material and labor.
- Paver type and pattern. Clay brick or a complex pattern with many cuts costs more than a standard concrete paver in running bond.
- Access and staging. A tight infill lot with trees and alley access takes more planning than an open lot.
A written estimate spells out demo, base, edging, pavers, cuts, compaction and sealer. It does not cover unforeseen utility relocation or major drainage redesign; if we find either, you’ll get a change order to approve in writing before we touch it. Upfront pricing, no surprises. Call (844) 560-0925 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Do to This Job
Farmers Branch is built out, so paver driveway work here is almost always a tear-out and rebuild rather than a greenfield install. We’re regularly on the older streets in 75234, where the original 1950s and ’60s ranches are being replaced or expanded, often in narrow infill lots where the crews on both sides are managing active demo-and-rebuild sites. That means tight staging, tree protection and alley access are part of every quote, not an afterthought. Add North Texas black-clay soil that swells and shrinks with every wet-dry cycle, and the base build becomes the whole ballgame. The City of Farmers Branch permitting and inspection process has to be handled precisely, and homeowners inside the loop expect exactly that. If the driveway is part of a full Driveway & Pavers in Farmers Branch project, we scope the whole thing up front.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Farmers Branch

Most paver driveways in Farmers Branch take three to six working days, weather depending. Demo and haul-off run one to two days, base build two to three, laying and cuts a day or two, and sealing a final day. Rain on this clay soil can push the base stage, so we build a cushion into the schedule and keep you posted. Call (844) 560-0925 and we’ll give you a realistic window for your property.
Often yes, depending on scope and whether the driveway footprint, drainage or approach changes. We handle the City of Farmers Branch permitting and inspection paperwork and walk you through what’s required before work starts. If your project touches the approach or grading, expect inspection. Call (844) 560-0925 and we’ll tell you what your job needs.
In most cases yes, we keep excavation inside the driveway footprint. On tighter infill lots we plan access and staging carefully. If the base work uncovers a drainage or utility issue that needs more, you approve it in writing first. Call (844) 560-0925 for a free on-site look.
Paver driveways in Farmers Branch run $7,000 to $18,000 installed and sealed, driven by size, base depth and paver choice. The number you see on your written quote is the number you pay; any change order gets your signature first. Call (844) 560-0925 for an exact quote.
Every paver driveways project we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, not damage from vehicles or neglect. We also source pavers from established brands including Belgard. Call (844) 560-0925 with questions about coverage.
Get Your Free Paver Driveways Estimate in Farmers Branch
If you’re ready to price a paver driveway in Farmers Branch, call (844) 560-0925. A live person answers around the clock, and we’ll schedule a free on-site estimate at a time that works. You’ll get a written, line-item quote with the base depth and paver type spelled out, plus our 0% financing for 18 months and $1,000 off projects over $10,000 if they fit. We connect you with experienced, background-checked technicians who do the work and stand behind it.
Written by the team at Groundwork Construction Co.












