







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Addison, TX: What the Job Actually Involves
Paver driveways in Addison, TX typically cost $7,000 to $18,000 for a residential installation, and most run five to eight working days from demolition to the final sweep of joint sand. The job means tearing out the existing surface, rebuilding a compacted aggregate base sized for North Texas clay, setting the pavers on a bedding layer, cutting in the edges, and locking everything with polymeric sand. Call (844) 560-0925 and we’ll walk your driveway and give you a written, line-item number.
How We Build a Paver Driveway, Stage by Stage

The sequence below is what actually happens on a residential paver job in Addison, not a marketing summary. It’s also the part most homeowners never get explained before they sign, which is exactly why we spell it out.
Day 1 – Layout, demo, and haul-off
We mark the excavation limits with paint and string line so you can see the finished footprint before a blade touches the ground. Then the old surface comes out: concrete, asphalt, gravel, or failed pavers, loaded and hauled the same day. On a standard two-car drive this is a full day. You’ll confirm the finished width and where the car actually parks, because that decides the excavation depth.
Day 2 – Base prep and compaction
We excavate to a depth that accounts for the paver thickness plus a bedding layer plus a base thick enough to carry vehicles. Flexible base goes down in lifts, and each lift gets compacted with a plate or roller before the next one. This is the stage that decides whether your driveway stays flat for a decade, and it’s the stage cheap crews skip. On Addison’s heavy clay, cutting corners here shows up as rutting within two summers.
Day 3 – Grading, drainage, and any flatwork
We set the slope so water leaves the driveway rather than pooling against the garage door or the slab edge. If a new edge restraint, a drain, or a widened apron is part of the scope, it happens now, before any pavers go down. You’ll approve the fall direction (toward the street, a swale, or a drain) here, and this is the last point where changing the layout is cheap.
Days 4 through 6 – Setting and cutting pavers
Bedding sand gets screeded to a consistent depth, then the pavers go down in your chosen pattern. Field pavers are fast; edge cuts, curves, and borders are slow, and that’s where the days go. Expect the crew to run a wet saw most of an afternoon on a driveway with two curves and a border course.
Days 6 through 7 – Joint sand, compaction, and cleanup
Polymeric sand goes into the joints, the surface gets a final compaction pass to seat everything, and we sweep and wash down. We walk the finished driveway with you, point out the expansion joints and edge restraints, and hand over care instructions. You approve the punch list on site, and any touch-up happens before we pack up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Paver selection drives both the look and a meaningful chunk of your budget, so it’s worth understanding the trade-offs before you fall for a photo online.
- Concrete pavers (the default choice): The most durable option for a vehicle surface in North Texas. They resist freeze-thaw cracking, hold color well, and can be pulled and reset if a utility line ever needs digging. Most residential installations land here. Honest trade-off: fewer exotic colors than clay brick, and the base work still costs what it costs.
- Clay brick pavers: Genuine fired clay, rich color, and a look that suits Addison’s older low-rise and mid-century pockets. They cost more per square foot and chip more readily under heavy loads, so they shine on a decorative apron or border rather than a full truck-rated drive.
- Permeable pavers: Open-joint systems that let rain soak in rather than run off. Worth the premium where a driveway slopes toward a garage or where you want to reduce runoff. They need a properly graded aggregate reservoir below, which adds excavation depth and cost.
- Pattern: Running bond and herringbone are the two workhorses. Herringbone locks together better under turning tires and is worth the extra labor on a driveway. Basketweave and ashlar patterns read more decorative and cost a bit more in cutting.
- Color and finish: Tumbled finishes read older and hide tire marks; straight-edged finishes look crisper. Dark charcoal and deep red pavers show every speck of dust in summer sun, while sand and buff tones stay forgiving.
- Brand: Belgard pavers are a common spec for their color consistency and range, and we also work with systems from Cover when a homeowner wants a paver look coordinated with a covered structure. We’ll show you full-size samples on your own driveway, in your own light, before you commit.
What Paver Driveways Cost in Addison, TX

A residential paver driveway in Addison runs $7,000 to $18,000 installed. That’s the honest market range, and it moves for five reasons:
- Square footage: A single-car drive and a long double-wide with a turnaround are two different jobs. Area is the single biggest driver.
- Excavation and haul-off: Old concrete with rebar, root intrusion, or a base that’s failed to subgrade all add days and disposal cost.
- Base and drainage work: A driveway that needs a new drain, a retaining edge, or extra depth over soft clay sits at the high end.
- Paver grade and pattern: Premium clay brick in a cutting-heavy herringbone with a border course costs more than a running bond in standard concrete pavers.
- Permit and inspection scope: If the driveway ties into a public approach or crosses a utility easement, the permit and inspection piece adds coordination time.
A written estimate should list demolition, base depth, square footage, paver selection, edge restraints, sand, and cleanup as separate lines. It should also say what’s excluded: irrigation lines that need rerouting, utility relocations, and any HOA approval submission. We give you a fixed number, not a range that grows. Proudly serving local communities for over 42 years, we’ve learned that the estimate you sign should be the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Addison Driveways Specifically Face
Addison is a small, build-out city of roughly four square miles (ZIP 75001) wrapped by Dallas and Farmers Branch, so residential paver work here tends to land in one of three places: the small pockets of single-family homes on the town’s edges, the condo and townhome communities tucked behind the Belt Line Road and Dallas North Tollway corridors, and rebuilds of 1970s-80s multifamily properties where an aging asphalt or cracked concrete drive needs replacing. Permitting runs through the city’s building department, and because Addison is fully developed with high-traffic commercial neighbors, work along those corridors is often phased and scheduled around business hours and noise windows that wouldn’t apply in a surrounding suburb. The soil is North Texas expansive clay, which means the base design and drainage slope matter more here than in sandier parts of the metro. We regularly see driveways in the older Addison condos settle toward the garage door and hold water, which is the failure that turns a paver driveway into a fix rather than an upgrade. If your project is part of a full Driveway & Pavers in Addison scope, we’ll plan the whole thing as one job.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Paver Driveways in Addison
Most residential paver driveways take five to eight working days, weather permitting. Demo and base prep eat the first three days, and setting, cutting, and sanding fill the rest. Rain days push the schedule, since you can’t compact a wet subgrade. Call (844) 560-0925 and we’ll give you a dated start and finish before you commit.
Often yes, if the work changes a driveway approach at the street or touches a right-of-way or utility easement. Straight replacement of an interior private drive usually moves without a permit. We’ll identify which category your project falls in and pull the permits; the cost is in your written estimate up front.
Sometimes, but it’s rarely the right call in Addison. A paver-over-concrete install only works if the existing slab is sound, level, and drains correctly, and on 1970s-80s slabs that have settled toward the garage, it just transfers the problem upward. When the base holds, we’ll say so and save you money; when it doesn’t, we’ll show you why.

Residential paver driveways in Addison run $7,000 to $18,000 installed, depending on square footage, base condition, paver grade, and pattern. Call (844) 560-0925 for an exact number for your driveway; estimates are free and go over line by line.
Yes. Every paver driveway we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. The number you see on the written estimate is the number you pay, and we back it in writing for two full years after final walkthrough.
Get a Written Paver Driveway Estimate in Addison
We’ll walk your driveway in Addison, check the base and drainage, and hand you a written, line-item estimate for paver driveways at no cost. Calls are answered live, 24/7, by a person who can actually book the visit, and every project is covered by the 730-Day Done Right Promise. Call (844) 560-0925 to schedule your free on-site estimate, or explore our Driveway & Pavers service to see the full scope.
Homeowners in Addison often pair a driveway project with Door Installation in Addison, and some coordinate Cabinets & Countertops in Addison while crews are already scheduled.
Written by the team at Groundwork Construction Co.












