







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Addison, TX: What It Takes and What It Costs
Door installation in Addison, TX usually runs $850 to $3,400 per exterior door installed, with most single-door jobs finished in one day and multi-door or frame-repair work stretching to two or three. Addison’s wind and hail exposure means the door you pick has to be rated, sealed, and hung square, not just pretty. Call (844) 560-0925 for a free on-site estimate and a written, line-item quote.

How our Addison door installation process actually runs

Doors look simple until you pull one out of a 1980s wall and find rot, a racked frame, or a rough opening that’s an inch out of square. Here’s how we sequence it so the surprises get priced before the work starts, not after.
- 1
Day 1, measure and inspect (about 45 minutes). We check the rough opening, the header, the sill pan, and how the existing frame ties into the wall. On Addison’s older low-rise and multifamily stock, this is where we usually find failing sill flashing or a frame that’s been swelling for years. You get the findings and the written estimate the same visit.
- 2
The order window (10 to 21 days). Standard Therma-Tru exterior doors land in about two weeks. Impact-rated or non-standard sizes can run three to six weeks. You pick the slab, the finish, the hardware, and the swing at this stage, because once it’s ordered, changes cost money.
- 3
Day of removal and prep (2 to 3 hours). We pull the old door, cut back any rotten framing, replace the sill pan, and flash the rough opening. Prep is the part nobody sees and the part that decides whether the door leaks in a spring storm.
- 4
Setting and sealing (2 to 4 hours). The new unit gets shimmed, plumbed, and anchored, then sealed with a proper flashing system and low-expansion foam. We check the reveal gaps all the way around before the trim goes on.
- 5
Trim, hardware, and final check (1 to 2 hours). Casing, lockset, deadbolt alignment, threshold seal, and a water test at the sill. We walk the door with you, show you the latch adjustment, and hand over the warranty paperwork.
A standard single exterior door is a one-day job. A front entry with sidelights, a set of French doors, or a replacement that turns into frame repair can stretch to two or three days. We tell you which one you’re getting before we start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll choose between
Most of the decisions get made in the first week, and they’re the ones that drive the price. Here’s the honest breakdown.
- Fiberglass vs. steel vs. wood. Fiberglass (Therma-Tru is the name most homeowners recognize) holds up best in North Texas heat and won’t dent like steel or swell like wood. Steel is the budget choice but dents and rusts at the edges. Wood looks the best and needs re-finishing every few years against our sun. For an Addison front door facing west, fiberglass wins most of the time.
- Impact-rated vs. standard. Impact-rated units add roughly 20 to 40 percent to the door cost but give you real protection against hail and wind-driven debris. If you’re already thinking about the envelope, pair this with impact glazing on your Windows & Doors in Addison scope.
- Swing vs. slab and sizing. Standard 36-inch entries are the cheapest and easiest. Custom widths, arched tops, and sidelights add cost fast. A pre-hung unit is cheaper to install than a slab that has to be fitted to an existing frame.
- Hardware and finish. Basic builder-grade locksets are fine. Upgrade to a keyed deadbolt, a multi-point lock, or a smart lock and add a few hundred dollars. Finish matters here too: our UV load chews through cheap paint in a couple of seasons.
- Patio and sliding units. These overlap with the broader Windows & Doors work we do, and we’ll tell you when a slider is the better answer than a hinged pair.
What door installation costs in Addison, TX

Addison door installation lands between $850 and $3,400 per door for a standard exterior replacement, with most jobs clustering in the $1,200 to $2,200 range. Here’s the line-item view so you can see where the number comes from.
| Line item | Typical range |
|---|---|
| Standard exterior door (fiberglass or steel, installed) | $850 – $1,800 |
| Impact-rated or premium entry door | $1,600 – $3,400 |
| French or double door set | $2,200 – $4,500 |
| Frame, sill, or rot repair | $250 – $900 |
| Hardware and lock upgrade | $120 – $500 |
What pushes a job to the high end: non-standard sizing, an impact rating, significant rot or a racked frame, a relocation (moving a door means framing, drywall, and finish work), and a permit if the opening changes. What keeps it low: a same-size swap into a healthy frame with standard hardware.
Every written estimate we hand you is line-item and upfront. The number you see is the number you pay, with no change orders sneaking in mid-job. What’s typically not included: painting or staining the new door after install, and any structural repair found after demo, which we price separately and in writing before we touch it. Call (844) 560-0925 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Addison homes and buildings specifically do to this job
Addison is roughly four square miles of built-out commercial and restaurant property inside ZIP 75001, and that shape changes what door work looks like here. Most of what we install isn’t a suburban front door; it’s entry and service doors on 1970s to 1990s low-rise offices, restaurant and bar build-outs along Belt Line Road and the Dallas North Tollway corridors, and apartment and condo renovation. New single-family subdivisions barely exist inside town limits, so the work skews toward occupied buildings that have to stay open while we install.

That means permits are typically commercial tenant-improvement or meeting-and-inspection permits, and the job has to be phased around neighbors and patio service, often working against late-night noise and traffic limits that don’t apply in Carrollton or Farmers Branch. North Texas spring hail and wind-driven rain punish old entry doors and failing sill flashing first, and we see more post-storm door and frame damage on Belt Line frontages than anywhere else. If the scope grows into full envelope work, homeowners and owners often pair it with Cabinets & Countertops in Addison on a restaurant refresh, or with a Garage Conversion ADU in Addison when a back entry door becomes part of an added living space. We cover all of Addison and the surrounding corridor.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions about door installation in Addison

A standard single exterior door takes one day, start to finish, once the door is on site. Order lead time is the real wait: about two weeks for a standard Therma-Tru unit and three to six weeks for impact-rated or custom sizes. Multi-door jobs or frame repairs can add a day or two. Call (844) 560-0925 for a timeline on your specific door.
You need a permit whenever the opening, framing, or structural path changes; a same-size replacement in an existing opening generally does not require one. Commercial and multifamily work in Addison almost always runs through a permit and inspection. We pull the permits and pass the inspections, and we’ll tell you upfront which category your job falls into.
Yes. A same-size replacement swaps into the existing rough opening with no plumbing or structural changes, which is why it stays in the lower price range. Moving a door or widening an opening means framing, drywall, and finish work, and that’s a different job with a different price. We scope it clearly before work starts.
Impact-rated exterior doors typically run $1,600 to $3,400 installed, roughly 20 to 40 percent more than a standard unit. The premium buys wind and hail protection that matters during a North Texas storm season. Call (844) 560-0925 for an exact quote – estimates are free.
Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space and it applies in writing, not just in conversation. Manufacturing coverage on the door itself comes from the brand partner.
Get a free door installation estimate in Addison
If a door in your Addison building is sticking, swelling, letting water in, or just past its storm-season prime, we’ll come measure it, show you the realistic options, and hand you a written line-item estimate. Call (844) 560-0925 and a live person answers, day or night. We’ll book a site visit, check the frame and flashing, and price it clearly before any work begins.
Written by the team at Groundwork Construction Co.












