







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Allen, TX: What the Job Actually Involves
Paver driveways in Allen, TX typically run $7,000 – $18,000 and take three to five working days on a standard two-car apron, longer if you’re adding a heavy-duty approach to a detached workshop or pulling out an old cracked slab first. You’re getting a base that’s excavated and compacted, a compacted aggregate layer, then real pavers set on a sand bed with edge restraint and polymeric joint sand. Call (844) 560-0925 for a free on-site estimate before you commit to anything.

How We Build a Paver Driveway in Allen, Step by Step

Most homeowners want to know what happens on day one versus day three, so here’s the actual sequence we follow on Allen jobs.
Stage 1 – Site review and layout (day 1, half the morning). We walk the drive with you, check the existing base for settlement, and set the finished grade so water runs away from the slab and the garage door opening, not toward it. This is where you decide the paver field pattern, the border course, and whether you want a color-band accent. Getting the pattern locked now saves a difficult conversation later.
Stage 2 – Demo and excavation (day 1, the rest of the day). Old concrete comes out, or we strip and grade raw soil on a new build. For a standard apron we’re removing roughly 8 to 10 inches of material to make room for base plus bedding. If you’re adding a service drive to a workshop in one of the acreage properties along the western edge of 75013, we calculate depth for heavier vehicle loads, which means a thicker aggregate base and sometimes a deeper excavation.
Stage 3 – Base and compaction (day 2). We lay the aggregate base in lifts and compact each lift with a plate compactor. Skipping lifts is the number-one shortcut we see on cheap driveways, and it’s why they rut in the first wet season. This is the stage you don’t see, and it’s the stage that determines how the driveway behaves in ten years.
Stage 4 – Paver install, edging, and sand (days 3 to 4). Screed the bedding sand, set the field, cut the border, lock the edges with a restraint, then sweep polymeric joint sand into the seams and mist it in. On a larger drive this is a full day of setting and a full day of finishing.
Stage 5 – Cleanup and walkthrough (final half day). We sweep, wash off the dust, and walk you across the finished surface. You get a written acceptance of the layout and finish, and at that point the 730-Day Done Right Promise is on paper for the workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between in Allen
This is where the driveway’s character and its bill live. Here’s the honest read on each.
- Standard concrete pavers (interlocking, 60mm): The workhorse choice. Runs toward the lower end of the $7,000 – $18,000 range for a typical drive, handles freeze-thaw and summer heat cycles well, and lets you replace a single damaged paver instead of patching a slab. Best for most Allen homeowners who want it done once and forgotten.
- Heavier interlocking pavers (80mm) for shop and equipment drives: If the drive is carrying a trailer, a work truck, or a shop approach, we spec the thicker unit and a deeper base. Costs more per square foot but is the right call for a working property where a thin paver would roll.
- Permeable pavers: Open-graded system that lets water through the joints into a stone reservoir below. Sells itself on drainage-sensitive lots and where the County has flagged runoff, but it costs 15 – 25% more than conventional and takes a trained installer to get the base right. Worth it only when drainage is a real problem.
- Color and textured finishes: Tumbled edges, blended charcoals, terracotta tones, and a contrasting border course. Aesthetic money – expect a modest premium over plain gray, and it reads beautifully against Allen’s brick veneer facades.
- Belgard pavers: One of the curated brands we work with. Their catalog covers the patterns and color blends most Allen homes want without going custom-order.
What Paver Driveways Cost in Allen, TX
For a standard residential paver driveway in Allen you’re looking at $7,000 – $18,000 installed. Here’s how that number lands where it does.
Size: A single-car apron versus a wide two-car with a turn-around is the biggest single variable. Square footage drives base material, paver count, and labor.
Existing condition and demo: Removing an old concrete slab adds cost versus grading bare soil. Cracked, heaved concrete on a North Texas clay lot is common, and hauling it off is real work.
Base depth and access: A heavy-duty approach for a shop or work truck means more excavation and aggregate. Tight lots or lots backing to a greenbelt can slow equipment movement and add time.

Material grade: Standard 60mm pavers sit near the low end; thicker 80mm or permeable systems push toward the top. Border courses and accent bands add a small premium.
Drainage and grading corrections: If the existing grade sends water toward your foundation, we correct it – adding a swale or re-sloping – before any pavers go down. This is where Allen’s clay soils matter most.
A written estimate from us is line-itemed: excavation, base, pavers, edging, joint sand, disposal, and labor, each with its price. It doesn’t include landscaping repair or fence relocation if those are needed, and we flag that up front so there are no change orders later. It’s part of a larger Driveway & Pavers in Allen project if you’re also adding a walkway or patio in the same pass.
See the difference
Before
After
Before
After
Before
AfterWhat Allen’s Homes and Clay Do to a Paver Driveway
Allen’s building stock matters here. The town was rural until the late 1980s and 1990s, then exploded as a Collin County suburb, so most of the housing sits in a single construction wave roughly 1990 – 2015. That means a lot of the concrete drives we’re replacing are now 25 to 30 years old and have done their first, sometimes second, round of cracking. We’re not patching a 60-year-old drive in an inner-ring neighborhood; we’re doing first-cycle replacement on the same age of subdivision stock all over 75013 and 75002, which is why we see the same failure patterns. The expansive black clay under slab foundations is the culprit – it swells in spring and shrinks hard by August, so a drive that looked flat in March heaves into a stair-step by fall. A properly base-built paver drive flexes with that movement instead of cracking against it, which is the practical argument for the material here. We cover the full Allen area, from the older ranch properties near the west side toward the Exchange Parkway townhome infill, and the depth and drainage spec changes with the lot. If you’re already planning a broader landscape project, our full Driveway & Pavers service covers patios and walkways in the same pour.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Paver Driveways in Allen

Most Allen paver driveways finish in three to five working days, including demo, base, install, and cleanup. Larger drives or heavy-duty shop approaches can run a day longer for the deeper excavation; the estimate pins the schedule before you sign.
Many residential driveway replacements in Allen don’t require a permit beyond HOA approval, though the exact answer depends on your lot and whether you’re widening the drive. We confirm what’s needed for your address before work starts and handle the paperwork; call (844) 560-0925 for the specifics on your property.
Overlay is possible only if the old concrete is sound and the grade has room for the extra height, which is uncommon on Allen’s clay-heaved drives. In most cases removing the concrete and building a proper base is the right answer, and the price reflects which way your job goes.
Expect $7,000 – $18,000 installed for a standard residential paver driveway in Allen, with the range driven by square footage, base depth, material grade, and demo. Call (844) 560-0925 for an exact quote – the on-site estimate is free.
All paver driveway work is covered by the 730-Day Done Right Promise – if the workmanship isn’t right, we make it right, in writing. That covers installation and base, separate from any product warranty on the pavers themselves.
If the paver work is only part of a bigger upgrade, Allen homeowners often pair this with Door Installation in Allen or Cabinets & Countertops in Allen to handle the whole project with one contractor.
Get a Free Paver Driveway Estimate in Allen
Call (844) 560-0925 and a live person answers any hour of any day – no voicemail, no waiting. We’ll schedule a free on-site estimate at your Allen property, measure the drive, walk the grade with you, and hand you a written line-item quote with no surprises. 0% financing for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












