







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Dallas, TX: What the Job Involves
Concrete driveways and concrete work in Dallas typically run $4,500 – $12,000 for a new driveway pour, with most single-drive residential jobs landing in the $6,000 – $9,000 range. Plan on two to five days on site from demo to cure, and don’t park on the new slab for at least seven days after the pour. The number that matters most here is the one you get in writing before we break ground. Call (844) 560-0925 and we’ll schedule a free on-site estimate at your Dallas property.

How We Pour a Dallas Concrete Driveway, Start to Finish

Concrete work rewards patience up front. The pour itself is fast; the prep and curing are where a driveway earns its first ten years. Here’s the real sequence we follow on a Dallas job, with the decisions you’ll be making along the way.
Stage 1: Site walk and layout (day 1, roughly 1 – 2 hours)
We measure the existing drive, confirm slope and drainage away from the house, and locate the utility lines before anything is cut. You’ll decide on width (a standard single lane is 10 – 12 feet, a double is 20 – 24), the apron where the drive meets the street, and whether you want any expansion joint pattern. On Dallas lots with tight side yards, we also confirm the turn radius now so nobody’s scraping a mirror later.
Stage 2: Demolition and haul-off (day 1 – 2, half a day to a full day)
Old concrete gets broken out and hauled away by the truckload. That demo and disposal is a real cost driver, especially on 1950s shallow-slab ranch properties where the original drive was poured thick. You don’t have to be on site for this stage; it’s the noisiest part of the job.
Stage 3: Subgrade prep and form setting (day 2, one full day)
This is the stage that separates a driveway that lasts from one that cracks in two years. We compact the subgrade, build up a proper base where needed, set wooden forms to the agreed grade, and add rebar or wire mesh reinforcement. You’ll sign off on the final grade before the pour, because once the concrete goes in, that decision is locked.
Stage 4: The pour and finish (day 3, roughly half a day)
Concrete arrives by truck and gets screeded, floated, and finished. You’ll choose the surface texture here: a brushed broom finish for grip on a Texas slope, a smooth trowel if the look matters more than traction, or an exposed aggregate for grip and texture in one pass. Control joints get cut within the first 24 hours to direct where the slab cracks, because every slab cracks somewhere and joints decide where.
Stage 5: Curing (7 days before you drive on it)
Fresh concrete keeps gaining strength for weeks, but the first seven days decide most of it. We keep it damp during the hottest Dallas afternoons so it cures slowly instead of shrinking fast, and we walk you through the cure timeline. Keep vehicles off for seven days and heavy trucks off for longer. This is the one stage a homeowner can genuinely wreck by being impatient.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Dallas Concrete Job
Concrete isn’t one product. The choices below are the ones that actually change how a Dallas driveway looks, drains, and holds up, plus what each one costs you.
- Standard broom finish: The reliable default for driveways. Great grip, hides minor surface irregularities, and keeps your budget in the low-to-mid range. It suits most Dallas homes.
- Exposed aggregate: We wash the surface before it sets to reveal the stone underneath. More traction, more texture, and a slightly higher cost per square foot. A good match for older Oak Cliff properties that want character.
- Smooth trowel finish: The cleanest look, common on newer infill builds. It’s slicker when wet, so we’ll steer you away from it on any sloped drive.
- Reinforcement: rebar vs. wire mesh: Rebar costs a little more up front and holds the slab together better across Dallas’s shrink-swell clay. Wire mesh is the budget option and works on lightly used drives.
- Slab thickness: Standard residential driveways run 4 to 5 inches; anything a heavy truck will sit on should go thicker. The difference is real money, so decide based on what actually parks there.
- Width and turnaround apron: Going from a single lane to a double, or adding a turn pad, is the biggest single line item. Worth it on a property where a wide driveway genuinely changes daily life.
What Concrete Driveways & Concrete Work Costs in Dallas, TX
Most Dallas concrete driveway jobs land between $4,500 and $12,000, with a full driveway replacement running $5,000 – $14,000 once demo and haul-off are included. Where you fall in that band comes down to five things:

- Square footage: The obvious driver. A short single-lane drive is far cheaper than a long double.
- Existing condition and demo: Thick old concrete, tight access, or a slab poured over debris all add labor and haul-away cost.
- Reinforcement and thickness: Rebar and a thicker slab protect against Dallas’s clay movement but add material cost.
- Finish: A broom finish is the value pick; exposed aggregate and decorative work push the number up.
- Drainage and grading scope: If the drive has to tie into a new swale or French drain to move stormwater away from the house, that’s a separate line item.
A written estimate from Groundwork Construction Co. spells out the square footage, thickness, reinforcement, finish, demo, and disposal as separate lines, with upfront pricing so the number you see is the number you pay. What it typically won’t include: landscaping repair around the edges, moving a fence or gate, or relocating buried utilities if the locate turns up a surprise. We’ll flag any of those before work starts, not after. The whole thing is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas Homes Specifically Do to Concrete Work
Dallas construction is defined by expansive black-clay soil, and that clay changes how we approach every slab here. After a dry Texas summer, the clay under a driveway shrinks and cracks open, then the fall rains swell it back; that cycle is why we build thicker, reinforce harder, and grade for drainage on Dallas jobs in a way contractors in sandier or rockier Texas metros simply don’t have to. The city’s booming infill and teardown-rebuild market makes the tension sharper: 1920s – 40s pier-and-beam bungalows now sit beside brand-new townhomes on the same unstable ground. We work across the full build range, from those older homes to 1950s – 70s shallow-slab ranches. Before a pour on a Dallas driveway, we confirm the grading sheds water away from the house, because flash-flood-prone drainage will find every low spot. If your project is part of a full Driveway & Pavers in Dallas scope, we’ll coordinate that with you up front.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Concrete Driveways & Concrete Work in Dallas

Plan on two to five days of on-site work, then seven days of curing before you drive on the slab. Demo, prep, and forms usually take one to three days; the pour itself takes a half day. Call (844) 560-0925 for a schedule based on your specific Dallas project.
Often yes, particularly when the work involves grading, drainage, or any change to how stormwater leaves the property. The rules depend on the scope, and we’ll confirm what your job needs during the estimate. Groundwork pulls the required permits and stands by the inspections. Call us and we’ll walk you through it for your address.
Concrete driveway installation in Dallas runs $4,500 – $12,000, and a full replacement runs $5,000 – $14,000. The spread comes down to square footage, demo, reinforcement, finish, and drainage. Call (844) 560-0925 for an exact quote, and estimates are free.
No. We work from a written line-item estimate and an upfront price, so the number you sign is the number you pay. If we find something genuinely hidden, like old concrete poured over debris or a utility line where the locate said it wasn’t, we’ll stop and get your approval before a dollar gets added. Call (844) 560-0925 to get the estimate started.
Every concrete job we do is backed by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to the pour, the finish, and the grading. Call (844) 560-0925 to talk through the details on your Dallas driveway.
Get Your Free Concrete Estimate in Dallas
If your Dallas driveway is cracked, heaved, or just plain tired, the first step is a free on-site estimate. Call (844) 560-0925 and we’ll set a time to walk your property, measure the square footage, and put a line-item price in writing. Calls are answered by a live person 24/7, so you won’t be stuck in a voicemail queue. Many Dallas homeowners pair this with Door Installation in Dallas or ADU Site Prep & Utilities in Dallas while we’re already on site, and we’re glad to quote both together. Learn more about our Driveway & Pavers service, or explore everything we do across Dallas.
Written by the team at Groundwork Construction Co.












