







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Sachse, TX: What to Expect
Concrete driveways and concrete work in Sachse typically run $4,500 – $12,000 for a new driveway pour, with most standard two-car jobs landing near $6,500 – $8,500. A straightforward pour takes 2 – 4 days from demo to cure, though clay-soil prep and extended curing add time. Call (844) 560-0925 for a free on-site estimate with a written, line-item quote.

How a Concrete Driveway Gets Built Here, Stage by Stage

Concrete isn’t poured in a day and forgotten. The work that determines whether your driveway survives Sachse’s clay is almost entirely underground. Here’s the sequence we follow, and what you’ll need to decide at each point.
Stage 1: Site review and layout (day 1, half day)
We walk the existing driveway or bare ground, check slope and drainage away from the slab, and confirm where the pour meets the garage apron and street. You decide the driveway width (typically 10 – 12 feet for a single-car approach, 16 – 20 feet for a two-car), the finish texture, and whether you want a border or exposed-aggregate accent. Nothing gets demoed until you sign off on the layout.
Stage 2: Demolition and haul-off (day 1 – 2, 4 – 8 hours)
Old concrete or failing asphalt comes out with a breaker and gets hauled off-site. This is the noisy stage. If we find soft subgrade, root intrusion, or an old utility line running under the footprint, you hear about it before we proceed. Surprises here are common on 1990s Sachse builds where original tree roots have crept under the slab.
Stage 3: Subgrade prep and base (day 2, 4 – 6 hours)
We excavate 6 – 8 inches, compact the subgrade, and lay a compacted crushed-stone base. Because Blackland Prairie clay swells and shrinks, base thickness and proper compaction matter more here than on sand. You decide whether to add a moisture barrier or a thicker base for heavier vehicles or RVs. This is the stage you cannot inspect later, so we encourage you to watch it.
Stage 4: Forming, reinforcement, and joints (day 2 – 3, 4 – 6 hours)
Forms go up, rebar or wire mesh goes in, and we cut control joints to direct cracking. For a typical Sachse driveway we set joints every 8 – 10 feet and add expansion joints at the garage apron and street. You approve reinforcement choice (mesh is standard; rebar costs more and suits heavier loads).
Stage 5: Pour, finish, and cure (day 3, plus 5 – 7 days cure)
The pour itself is a few hours. Finishing and edging follow, then curing. You’ll keep vehicles off for roughly 5 – 7 days and heavy loads off longer. We give you a cure schedule in writing. Get caught out with rain and the finish changes; our crews watch the forecast and stage the pour accordingly. Every job is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Standard gray broom finish – the default. Durable, low-slip, the least expensive. Suits most Sachse subdivisions where HOA rules prefer a clean neutral look.
- Exposed aggregate – washed to reveal the stone. More texture and grip, hides tire marks well, adds roughly 10 – 15% to the cost. Popular on driveways with a visible slope.
- Stamped or colored concrete – a paver-style look without the joint maintenance of pavers. More labor, higher cost, and the finish can wear unevenly in high-traffic spots.
- Reinforcement: mesh vs. rebar – wire mesh is the baseline; rebar adds cost but holds up better under heavy trucks or shifting clay.
- Base and drainage – thicker compacted base plus a moisture barrier costs more up front and reduces the cracking risk that comes from soil movement.
- Width and apron – a wider driveway or extended apron meeting the street raises square footage and cost proportionally.
If the driveway is part of a full Driveway & Pavers in Sachse project with a front walkway or fresh approach, we scope the whole thing in one written estimate so the numbers line up.
What Concrete Driveways & Concrete Work Costs in Sachse, TX
Expect $4,500 – $12,000 for a new concrete driveway pour in Sachse, and $5,000 – $14,000 for a full replacement where old concrete is removed first. Concrete work beyond the driveway (aprons, pads, steps) is quoted by the square foot and added to the same estimate.
Five things push a Sachse job toward the low or high end:

- Square footage – the single biggest lever. A short single-car approach sits near the bottom; a long two-car driveway with an apron climbs fast.
- Existing condition and demo – replacing a cracked original slab means breaking out and hauling, which adds labor and disposal.
- Subgrade surprises – soft clay, roots, or an old utility line under the footprint raise prep cost.
- Material grade – stamped, colored, or exposed-aggregate finishes cost more than a broom finish; rebar over mesh adds to the per-yard price.
- Permit scope – if the job touches the right-of-way or utility connections, the permit adds a line item and a little lead time.
A written estimate from us lists the square footage, base depth, reinforcement, finish, joints, haul-off, and permit line separately. It typically does not include landscaping repair around the edges, fence or gate regrading, or drainage correction elsewhere on the lot unless we’ve scoped it. Upfront pricing, no surprises: the number you see is the number you pay, and 0% financing for 18 months is available, plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse Homes Specifically Do to This Job
Sachse sits on Blackland Prairie clay, and that clay is why most of the concrete calls we get here start with the same complaint: a driveway that cracked within a few years. The soil swells when it’s wet and shrinks when it dries, and North Texas swings between heavy spring storms and summer drought. A pour with thin base and no control joints will move with that clay and crack; the fix is compaction, a proper base, and joints set at the right intervals. That’s the detail out-of-town crews skip.
The housing stock shapes the work too. Most of Sachse in ZIP 75048 is 1990s – 2010s brick-and-frame on slab foundations, with a smaller core of older ranch homes along the original town grid off 5th Street. On the newer subdivisions, original driveways are reaching the age where cracks and settled slabs show up; on the older grid, we’re often replacing a driveway that was poured decades ago. Before any pour, check your HOA’s rules on finish and color, and confirm whether the work touches the street right-of-way, which triggers a city permit and inspection. We cover all of Sachse and pull the permits where they’re required. Our crews are background-checked and arrive in uniform. For the wider paving scope, see our Driveway & Pavers service.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Sachse

A standard concrete driveway in Sachse takes 2 – 4 days of active work, plus 5 – 7 days of curing before you drive on it. Demo, prep, and the pour happen in that window; cure time depends on weather and thickness. Call (844) 560-0925 and we’ll give you a realistic schedule for your lot.
You need a permit when the work touches the right-of-way or public infrastructure, and some HOA and city rules apply based on what the driveway connects to. A simple replacement inside your own property line often doesn’t require one. We confirm the requirement before we start and pull the permits when they’re needed.
Sometimes, yes, when the existing slab is sound and the height works out, an overlay is possible, but most Sachse clay-soil failures start underneath, so an overlay just hides the problem. In most cases we recommend full removal and a fresh pour. We’ll tell you which applies after we look at the subgrade.
New concrete driveway installation runs $4,500 – $12,000 in Sachse, and a full replacement runs $5,000 – $14,000. Finish choice, square footage, and subgrade condition are the biggest variables. Call (844) 560-0925 for an exact quote; estimates are free.
Yes. Every concrete job we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. A written quote spells out what’s covered and how long. Ask us to walk you through it before you sign.
Get a Free Concrete Estimate in Sachse
Tell us the driveway size and what’s failing, and we’ll schedule a free on-site estimate in Sachse. We measure, check the subgrade, and hand you a written line-item quote with the base depth, reinforcement, finish, and permit line shown separately. Questions before then? Call (844) 560-0925 and a live person answers, any hour. If your project also touches a structure, homeowners often pair this with ADU Site Prep & Utilities in Sachse or Door Installation in Sachse.
Written by the team at Groundwork Construction Co.












