







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Garland, TX: What It Takes and What It Costs
Door installation in Garland typically runs $450 to $1,400 per exterior door and $250 to $650 per interior door, with most single-door projects finished in one day and multi-door jobs spread across two to four. Entry door replacement with a prehung unit, frame repair and hardware swap lands in the $900 to $2,200 range. Call (844) 560-0925 for a free on-site estimate on your specific openings.

How We Run a Door Installation Project, Start to Finish

Door work looks simple from the driveway. The framing behind the trim is where it gets interesting, especially in older Garland homes. Here’s the actual sequence we follow.
Stage 1: Measure and confirm (day of estimate)
We measure the rough opening, check the frame for plumb and square, and look at the threshold and sill for rot or settling. You decide the door style, material and hardware at this stage, because lead times on custom sizes run two to four weeks while standard sizes are often in stock. This walkthrough takes about 45 minutes per door.
Stage 2: Prep and demo (day one, 1 – 2 hours per door)
The old slab and frame come out, and we inspect what’s behind it. On 1950s – 70s Garland ranches, that inspection regularly turns up rotted sill plates, cracked jack studs or old newspaper stuffed as shimming. We show you what we find before we fix it, with a number attached.
Stage 3: Frame correction and flashing (day one, 1 – 3 hours)
If the opening is out of square, we sister the framing and reset the rough opening. New flashing and a sill pan go in before the door does. On exterior doors this is the step that keeps water out for the next 20 years, and it’s the step cheap installers skip.
Stage 4: Set, shim and seal (day one, 2 – 3 hours per door)
The door goes into the opening, gets shimmed at the hinges and lock side, and we check for even reveals and a clean swing. Insulation goes into the gap, then interior and exterior trim. You confirm the swing direction and hardware placement before we close it up.
Stage 5: Finish and walkthrough (day two to four)
Caulk, paint touch-up and weatherstripping finish the job. Most interior doors stop here on day one. Exterior doors get a final water test at the threshold and a full walkthrough where you operate the door yourself and sign off. Any adjustment in the first 730 days falls under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
Picking a door comes down to four decisions, and each one moves the price. Here’s the honest trade-off on each.
- Steel entry doors: $450 – $1,200 installed. Tough, low maintenance, and they hold up to North Texas sun. Dents rather than scratches, and a cheap steel door can rust at the bottom edge in humid stretches. Suits most Garland front entries.
- Fiberglass entry doors: $700 – $1,800. Takes paint and stain like wood, won’t dent or rust, and holds up best in hail-prone areas. The trade-off is the higher upfront number.
- Solid wood doors: $900 – $2,500. Beautiful grain and easy to refinish, but they need re-sealing every two to three years in our heat and can warp if the entry isn’t covered. Best for covered porches.
- Hollow-core interior doors: $250 – $500. Light, cheap and fine for closets or a guest room. They block almost no sound, so skip them for bedrooms or a home office.
- Solid-core interior doors: $400 – $650. Noticeably quieter and heavier in the hand. Worth the upgrade for bedrooms and bathrooms.
- Hardware and finish: $60 – $400 per door. A quality lockset and deadbolt matter more than the door brand on an entry. We install Grohe hardware where it fits the budget.
What Door Installation Costs in Garland, TX
Door installation in Garland runs $250 – $650 for an interior door and $450 – $1,400 for an exterior entry, with premium entry systems reaching $2,200. Here’s what pushes a job from the low end to the high end:
- Size and type: standard 32″ to 36″ openings sit at the low end; oversize, arched or custom-fabricated openings add $300 – $800.
- Frame condition: rotted sill plates or out-of-square framing adds $150 – $600 per opening in labor and materials.
- Relocating the opening: moving a door to a new location means framing, drywall and header work, adding $700 – $2,000.
- Material grade: hollow-core to solid-core, or steel to fiberglass, is the biggest single swing in the number.
- Permit scope: a straight door swap usually needs no permit, but a new exterior opening or moved wall may require one.
Your written estimate lists the door, hardware, labor, trim and disposal line by line. It doesn’t include drywall patching beyond the immediate opening, paint on the surrounding wall, or structural repairs found after demo, which we price before touching anything. No-hassle upfront pricing means the number you see is the number you pay. Call (844) 560-0925 for an exact quote.

See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland was built out almost entirely in the 1950s – 70s, so nearly all the door work here is renovation on older single-family ranches and brick-veneer tract homes rather than new construction. That changes the job. Original door frames from that era were often shimmed with scrap and the openings have moved with the slab over 60-plus years, especially over North Texas black-clay soil that swells and shrinks with the wet-dry cycle. We check plumb before we ever order a door.
Foundation movement is the recurring story across this city. On slab-on-grade homes in the 75040 and 75041 ZIP codes, we regularly find a door that sticks in summer and frees up in winter, which is the foundation talking, not the door. If the leveling issue is serious, we tell you, because a new door installed over a moving slab will bind again. Where leveling has already been done, door replacement is often the final cleanup step. The windows and doors in Garland homes this age tend to wear together, so if you’re replacing several openings at once, it’s worth looking at our Windows & Doors in Garland page for the full scope. Homeowners often pair this job with Cabinets & Countertops in Garland when a kitchen refresh opens up a blocked doorway, or with a Garage Conversion ADU in Garland where a new exterior door is required for the living space.
Older Garland permitting and platting on built-out lots can add a step when the work changes the building envelope. We pull permits where required and pass inspections before the job closes.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Garland

Most door installation in Garland takes one day for a single door and two to four days for a full house of interior doors. Exterior entries with frame repair may spill into a second day. Call (844) 560-0925 to schedule a free estimate and confirm timing for your openings.
A straight swap of an existing door in the same opening usually needs no permit in Garland. A new exterior opening, a relocated door or a change to a load-bearing wall does require one. We handle the permit process and inspection where it applies.
Yes, most door replacements stay within the existing opening and touch no plumbing or structure. Moving a door to a new location is the exception and involves framing. We tell you which category your job falls into at the estimate.
No, the price on your written estimate is the price you pay for the scope listed. If we open the wall and find rot or failed framing, we stop, show you, and get your approval on a separate number before continuing.
Every door installation is covered by our 730-Day Done Right Promise. If an install settles, binds or leaks within that window, we make it right. Manufacturer warranties on the door and hardware come on top of that.
Get a Free Door Installation Estimate in Garland
If your Garland home needs a door replaced or a whole run of openings updated, call (844) 560-0925 for a free on-site estimate. We’ll measure the openings, check the framing, show you material options and hand you a written line-item number. Calls are answered by a live person, and our technicians have up to 12 years of experience on jobs like yours. Estimates are free, and there’s a $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.












