







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Garland, TX: What It Costs and How It Holds Up
A chain link fence in Garland usually runs $3,500 to $9,000 for a standard residential yard, depending on linear footage, height, gauge, and whether the line is being replaced or set new. Most residential jobs are finished in two to three days once we’ve marked utilities and pulled the required permits. The wind and hail that roll through North Texas punish anything flimsy, so the frame and footing matter more here than the mesh itself. Call (844) 560-0925 for a free on-site estimate and a written, line-item quote.

How a Chain Link Fence Goes In, Stage by Stage

Fencing looks simple from the street. The reason a chain link line lasts twenty years instead of eight is what happens below grade, and that’s where a Garland job lives or dies. Here’s how we run it, and what you’re deciding at each turn.
Stage 1: Site walk and utility locate
We walk the property line with you, confirm exactly where you want the fence, and mark the layout. Then we call for utility locates before anyone puts a shovel in the ground. In a built-out suburb like Garland, water and gas lines to older homes don’t always run where the plat drawing says they do. This stage takes a day or two of waiting on locates, and it’s the step where you decide dimensions and gate placement.
Stage 2: Demo and prep
If there’s an existing fence, we pull it out, haul off the old posts and panels, and clear the line. On Garland’s older lots, that often means dealing with fence posts set right against a slab edge, overgrown root systems, or a line that has wandered off the property boundary over the decades. This is a half-day to a full day depending on what’s there and how much concrete has to come out.
Stage 3: Holes and setting posts
We auger the post holes to depth, set the terminal posts (corners, ends, gates) in concrete, and let them cure before we hang any fabric. Terminal posts carry the tension of the whole run, so they get set deeper and heavier than line posts. This is the stage where wind rating and footing depth are locked in. You’re not making many decisions here, but you’re paying for the part of the job you’ll never see again.
Stage 4: Framing and fabric
Top rail, tension bands, and the chain link mesh itself go up next. All the tensioning and bracing happens here. How straight the top rail runs and how tightly the fabric is stretched is the difference between a fence that looks built and one that looks assembled. Most residential runs take a day at this stage.
Stage 5: Gates, hardware, and walkthrough
Gates get hung, latches and hinges set, and we do a full walkthrough with you. Gate swing, tension, and alignment are checked against the actual ground, which on older Garland slabs and piers is never perfectly level. Any adjustment happens before we leave. This is your chance to flag anything before final payment and the workmanship review.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link isn’t one product. The spec you pick drives both price and how the fence behaves in a Garland storm season. Here’s what actually matters:
- Height: 4-foot is the standard for keeping pets and kids in. 6-foot is the norm for property definition and security. Going taller means heavier posts and more concrete, and the price steps up noticeably.
- Wire gauge and coating: Residential mesh comes in lighter and heavier gauges. Heavier gauge resists sagging and impact damage. Galvanized mesh is the budget choice; vinyl-coated (usually green or black) costs more but holds color and blends into landscaping. Cheap light-gauge mesh is what you’re replacing in a decade.
- Post and rail weight: The frame is the wind-load story. Heavier terminal posts and rails with proper bracing are what keep a fence standing when a North Texas gust front hits. This is the trade-off most homeowners don’t think about until the fence is already leaning.
- Fabric style: Standard chain link, or a “privacy” configuration with slats woven through. Slats add cost and wind resistance concerns, so if privacy is the priority, that shifts the conversation.
- Gates and accessories: Single walk gates versus double drive gates, self-closing hinges, and whether you want a top rail or a top-tension wire run. Each gate is hardware you’re buying and maintaining.
The honest trade-off: going heavier everywhere costs more up front and saves you a rebuild in a decade. The cheap spec is the one that ends up on the ground after a bad storm.
What a Chain Link Fence Costs in Garland, TX
Typical residential chain link in Garland lands between $3,500 and $9,000. A small yard with a standard 4-foot line and one gate sits at the bottom of that range. A larger lot, 6-foot height, heavier gauge, vinyl coating, and multiple gates push toward the top. What moves the number in practice:

- Linear footage: The single biggest driver. Price scales with total run length.
- Height and gauge: Taller and heavier spec means more steel and more concrete.
- Existing fence removal and concrete: Old posts set in concrete have to come out and get hauled. That’s labor and disposal.
- Terrain and obstructions: Slopes, tree roots, and fences tight against a slab edge add labor.
- Permit scope: Height thresholds and placement rules can trigger a Garland permit, which adds time and cost.
A written estimate should spell out linear footage, height, gauge, coating, post spacing, gate count, demo, and disposal line by line. What typically isn’t included: cutting and removing large trees, repairing a sagging slab the posts would sit against, or moving utilities. We flag those up front so the number you see is the number you pay. Our technicians have up to 12 years of experience on fence runs across Garland.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland is a postwar first-ring suburb, and its whole housing stock went up in one 1950s – 70s build-out. That means we’re almost never fencing a new lot. We’re replacing fences on older single-family lots that are already built out, on 1950s – 70s ranch homes and brick-veneer tract houses across ZIP codes 75040, 75041, and 75042. Older lines have often wandered off the property boundary over decades, and utility placement doesn’t match the plat, so the locate and layout stage earns its keep here.
The expansive North Texas black clay under Garland’s older slabs is the real local variable. It swells and shrinks through the wet-dry cycle, and a fence post set in that soil can shift seasonally in a way it wouldn’t on stable ground. That’s why footing depth and proper concrete matter here. It’s also why the sprawling new-construction suburbs further out on the tollways don’t see the same fence line movement we do in Garland. When you’re already talking structure, homeowners often pair this with ADU Site Prep & Utilities in Garland or broader work, since the same ground conditions come up across both jobs. This is part of a full Fence Installation in Garland picture, and you can see our full Fence Installation service for other fence types. We cover all of Garland and the surrounding area, and on exterior work like this we pair with Door Installation in Garland when a project runs across the whole exterior envelope.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Garland

Most residential chain link fences in Garland are done in two to three days once utility locates are complete and permits are in hand. Small, straightforward yards can finish in two days; larger runs with demo and heavy concrete removal stretch toward three or four. Call (844) 560-0925 to schedule your free estimate.
It depends on height and placement, so you’ll want to confirm with the City of Garland before the line goes in. Taller fences and corner-lot placement are the usual triggers, and if it’s required, we handle the permit as part of the job so it’s inspected and passed. Call us for a free walkthrough and we’ll sort out what your specific lot needs.
A properly spec’d chain link fence with heavy terminal posts, deep concrete footings, and heavier gauge mesh handles typical North Texas wind and hail far better than a light-gauge frame. The footing and frame are the wind-load story, not the mesh. We build to hold, which is why our spec costs more than the cheap frame. Call (844) 560-0925 for an exact quote – estimates are free.
No. We give you a written, line-item quote up front, and the number you see is the number you pay. Surprises like buried concrete or a root-bound line get flagged during the estimate, not after the hole is dug. It’s all covered by our 730-Day Done Right Promise. Call us to get your free estimate.
Workmanship is backed by our 730-Day Done Right Promise, and material warranties come from the manufacturer depending on the gauge and coating you choose. If something’s not done right, we make it right. Call (844) 560-0925 to talk through spec options and get a written estimate.
Get Your Free Chain Link Fence Estimate in Garland
Call (844) 560-0925 to schedule a free on-site estimate for your chain link fence in Garland. We’ll walk the property line, check utility placement, confirm height and gauge against your lot, and hand you a written, line-item quote with no-hassle upfront pricing. A live person answers around the clock. Estimates are free, and there’s $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.












