







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete driveways and concrete work in Garland, TX: what it costs and how long it takes
Concrete Driveways & Concrete Work in Garland, TX typically runs $4,500 to $12,000 for a full driveway installation, and most residential pours are finished in two to five working days from demo to the day you can park on it. Replacement of an existing slab usually lands between $5,000 and $14,000 because tear-out and haul-off add to the job. Call (844) 560-0925 for a free on-site estimate with a written, line-item number.

What a concrete job actually looks like, day by day

Concrete is unforgiving. You get one shot at the pour, and everything that happens before the truck arrives decides whether the slab is still flat and crack-free ten years from now. Here’s the real sequence, and where you make decisions.
Stage 1: Site walk and layout (day 1, about an hour)
We measure the run, check where the driveway meets the street apron, and look at drainage. Garland lots are mostly flat, so water has to be pitched somewhere on purpose. This is when you decide width (a single-car run at 10 to 12 feet, a double at 20 to 24 feet) and whether you want a widened approach for a second vehicle. The layout gets marked before anything is cut.
Stage 2: Demo and haul-off (day 1 into day 2)
Old concrete comes out with a breaker and goes into a dumpster. A standard two-car driveway produces several tons of rubble, so haul-off is a real cost line, not a rounding error. On Garland’s older properties we sometimes find a second slab buried under the first, or a root system that has lifted sections. Either one changes the day’s plan and we tell you before we keep going.
Stage 3: Subgrade prep and formwork (day 2, sometimes day 3)
This is the stage nobody sees and the one that matters most. We excavate to depth, compact the base, and set forms to the final grade. Standard residential thickness is 4 inches; driveways that will see a heavy truck or an RV pad go to 5 or 6 inches with rebar rather than mesh. You’ll confirm thickness and reinforcement here, because that’s the single biggest lever on both price and longevity.
Stage 4: Pour, finish, and control joints (day 3 or 4)
The truck arrives, the concrete gets placed and screeded, and the finish goes on. Broom finish is the default for traction. Control joints get cut or tooled at planned intervals so the slab cracks where we want it to, not where it wants to. If you’re adding a border, a stamped band, or a decorative score line, this is the window for it.
Stage 5: Cure and the first drive (day 4 through roughly day 10)
Concrete doesn’t dry, it cures, and it gains strength over time. You can typically walk on it within 24 hours and drive on it after about seven days for a standard slab. We keep traffic off longer in cool, wet weather. Sealing happens after the slab has cured, not the same day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that decide how your Garland driveway holds up
Most of the price swing on a concrete job comes down to a handful of decisions you’ll make before the forms go up. Here’s what each one means in practice.
- Standard broom finish: the workhorse. Good traction, lowest cost, hides tire marks reasonably well. Right answer for most Garland driveways.
- Exposed aggregate: the top layer of paste is washed away to reveal the stone. More texture, more grip, and it ages gracefully. Adds cost and a day of finishing labor.
- Reinforcement: wire mesh is the minimum; rebar on a grid is stronger and worth it for a driveway that carries anything heavy. Skipping reinforcement to save money is a false economy on North Texas clay.
- Thickness: 4 inches for standard cars, 5 to 6 inches for trucks, trailers, or a pad that doubles as a work area. Thicker means more concrete, so it shows up directly in the number.
- Drainage and grading: a slight cross-slope keeps water off the slab and away from the garage. Done wrong, you get ponding and a cracked apron within a couple of seasons.
- Joints and layout: an apron, a widened approach, an expansion joint where the driveway meets the garage slab. Small details that prevent big cracks.
If the concrete work is one piece of a larger exterior plan, it’s worth looking at our Driveway & Pavers in Garland page for how the driveway ties into walks, aprons, and the rest of the hardscape.

What Concrete Driveways & Concrete Work costs in Garland, TX

A concrete driveway installation in Garland runs $4,500 to $12,000. A full driveway replacement, where we tear out the old slab and pour new, comes in at $5,000 to $14,000. Those are honest ranges for this market; the final number depends on five things.
- Square footage: a single-car run and a wide double driveway are not the same job. Length, width, and any turn-around area all scale the concrete volume.
- Existing condition: tear-out, haul-off, and root removal drive replacement costs above a fresh installation. A slab that’s failing because of subgrade movement may need base correction before we pour.
- Reinforcement and thickness: rebar and 5 to 6 inch slabs cost more up front and last longer. We put the choice in writing so you can see the difference.
- Finish and detailing: broom is the base. Exposed aggregate, borders, or decorative scoring add labor and a day.
- Permits and inspection: Garland permitting on an already-built-out lot adds a line item and lead time. We handle the paperwork and pull the permits.
Every estimate is line-item and written. The number you see is the number you pay, and projects over $10,000 get $1,000 off and access to 0% financing for 18 months. Workmanship is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. For the broader exterior picture, see our Driveway & Pavers service.
See the difference
Before
After
Before
After
Before
AfterWhat Garland homes specifically do to this job
Garland is a postwar first-ring suburb, and nearly all of its housing stock went up in one 1950s to 1970s build-out. That changes a concrete job in ways you won’t see in the newer sprawl suburbs further out on the tollways. We’re working on 50- to 70-year-old slabs, brick-veneer ranches, and driveways that have already been patched, re-patched, or widened once by a previous owner. The original concrete was often poured thin by today’s standards, and after decades on North Texas black clay, it has moved. Much of the work here is governed by older Garland permitting and platting on lots that are already built out, so there’s rarely a clean greenfield pour. And because the expansive clay swells and shrinks with every wet-dry cycle, we frequently find the slab out of level before we ever quote concrete. We cover all of Garland, from 75040 and 75041 through 75042 and 75049. If the grading is tied to a larger addition, homeowners often pair this with ADU Site Prep & Utilities in Garland so the site work is planned once. And when a garage door or entry door is part of the exterior refresh, it lines up with Door Installation in Garland. Groundwork serves the whole Garland area, and our technicians bring up to 12 years of experience to every pour.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Concrete Driveways & Concrete Work in Garland

Plan on two to five working days for a standard residential pour, with driving on the slab at about seven days. Prep and demo take the first two days; the pour itself is a single day, weather permitting. Call (844) 560-0925 for a schedule based on your lot.
Most new or replaced driveways and any work that touches the right-of-way or changes grading will need a permit from the city. We pull the permits and pass the inspections as part of the job. Call (844) 560-0925 and we’ll tell you exactly what your property needs.
Usually, yes; a driveway replacement is an exterior job and doesn’t require moving plumbing or structure. The exception is a slab that needs base correction or a utility line running under the approach, which we’ll flag during the site walk. For an exact answer on your lot, call (844) 560-0925.
Driveway installation runs $4,500 to $12,000, and a full replacement lands at $5,000 to $14,000 depending on size, thickness, and reinforcement. Call (844) 560-0925 for a free written estimate; the quote won’t change once work starts.
Every pour is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s two full years on workmanship, well beyond the industry norm. Call (844) 560-0925 to talk through the details before you commit.
Get a free estimate on your Garland concrete job
Call (844) 560-0925 to schedule a free on-site estimate for concrete driveways and concrete work in Garland. A live person answers 24/7, and on the call we’ll gather your address, the size and condition of the existing driveway, and what you want in the new slab. We’ll set a time to walk the lot, then hand you a written, line-item quote within a day or two. Permits pulled, inspections passed, 730-Day Done Right Promise in writing.
Written by the team at Groundwork Construction Co.












