







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Richardson, TX: What You’re Actually Getting
Paver driveways in Richardson, TX run $7,000 – $18,000 for most single-family homes, and a typical job takes 4 – 7 working days from demolition to the final sweep of polymeric sand. That includes excavation of the old surface, a compacted aggregate base, edge restraint, and the pavers themselves. Most Richardson projects land in the $9,000 – $13,000 range once you account for the base depth our clay demands. Call (844) 560-0925 for a free on-site estimate.

From First Cut to Final Sweep: How a Paver Driveway Goes In

Paver work is mostly base work. The pavers are the visible 20%; the other 80% is what keeps them flat and locked for decades. Here’s the sequence we follow, with realistic timing for a two-car Richardson driveway of roughly 400 – 600 square feet.
Day 1: Layout, Saw-Cut, and Haul-Off
We mark utilities, set the driveway’s edges, and saw-cut the existing slab or asphalt at the new boundary. Demo and haul-off take a full day for a typical slab. By late afternoon you’ll have a bare, graded subgrade. You decide here whether the new driveway expands the footprint (wider apron, extra bay) or matches the old outline – changing the footprint adds about $1,000 – $2,500 for the additional excavation and base.
Day 2: Excavation to Depth and Subgrade Compaction
Richardson sits on expansive blackland clay that swells and shrinks with the seasons, so we dig deeper than a Frisco or Murphy crew would on newer fill. Plan for 8 – 10 inches of excavated depth: 6 – 8 inches of compacted flexible base, plus bedding sand. A plate compactor runs over the subgrade in lifts. This is the day you’ll hear the most noise.
Day 3 – 4: Base Install and Edge Restraint
Crushed limestone base goes in 2 – 3 inch lifts, each watered and compacted. We set the edge restraint – a concrete or steel curb that keeps pavers from spreading under tire load – and screed the bedding sand. Your decision point: paver pattern and layout. Herringbone is the strongest under vehicle traffic; running bond and basketweave look cleaner under a front-facing garage but need tighter edge restraint on a driveway.
Day 5 – 6: Paver Placement and Cuts
Pavers go down from the garage outward, with cuts at the edges and around any curves. A 400-square-foot driveway takes a two-person crew about two full days of placement. You’ll walk the layout as it goes in – this is your last easy chance to change a border course or accent band.
Day 7: Polymeric Sand, Compaction, and Final Cleanup
We sweep polymeric sand into the joints, mist it to activate the binder, and run a final plate compactor over the surface. The driveway is drivable the same evening but stays off heavy loads for 24 hours while the sand sets. You get a walkthrough and a written warranty in hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Paver driveways aren’t a single product – the material and grade you pick change both the price and how the surface behaves through a decade of North Texas heat and clay movement.
- Concrete pavers (interlocking): The most common choice for Richardson driveways. Dense, colorfast through the full thickness, and about $8 – $14 per square foot installed. Under 8,000-pound loads they hold up well; individual pavers can be lifted and reset if the base ever shifts.
- Clay brick pavers: The premium option at roughly $12 – $20 per square foot installed. Classic look, but brick is more brittle under freeze-thaw and can chip if a heavy truck crosses at an angle.
- Permeable pavers: Open-graded joints let water drain through instead of running to the street. Worth considering if your lot has drainage issues – and increasingly requested on Richardson rebuild lots where new impervious-surface rules apply.
- Paver thickness: 2⅜-inch pavers suit foot traffic and light driveways; 2¾-inch or 3-inch is what we recommend for a driveway that sees an SUV or truck daily.
- Color and finish: Standard colors run $1 – $2 less per square foot than premium tumbled or blended finishes. Honest trade-off: premium finishes hide tire marks and clay dust better.
What Paver Driveways Cost in Richardson, TX
Paver driveway installation in Richardson runs $7,000 – $18,000, with the middle of that band – around $12,000 – being the most common outcome for a standard two-car drive.
Five variables push you toward the low or high end:

- Square footage. A 300-square-foot driveway lands near $7,000; a 700-square-foot drive with a turnaround runs $15,000 – $18,000.
- Base depth and subgrade condition. If the old slab is cracked and the clay has heaved, we remove more material and add base – roughly $1,500 – $3,000 extra on a compromised subgrade.
- Access and haul-off. Tight lots on the older 75080 blocks may need a smaller machine and hand-carry of base material, adding $800 – $1,500.
- Paver grade and thickness. Standard 2⅜-inch concrete pavers sit at the bottom of the range; clay brick or permeable systems at the top.
- Drainage and grading scope. Adding a channel drain or regrading toward the street can add $1,000 – $2,500.
Your written estimate itemizes excavation, base, edge restraint, pavers, sand, and haul-off, so you can see exactly what each line costs. It also lists what’s not included: irrigation line relocation, gas line marking, and any structural repair under a garage apron. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Richardson Homes Specifically Do to This Job
Richardson’s building stock is a different animal than what a crew sees in Plano or Frisco. The 75080 and 75081 ZIPs were built out largely in the 1950s – 70s around the Collins Radio and Texas Instruments corridor, so most of what we tear out on a paver driveway job is original 4-inch concrete slabs poured 50-plus years ago on clay that has moved every summer since. Those slabs are often cracked at the expansion joints and heaved at the apron, which means we’re digging deeper base than the new-build crews working greenfield tracts a few miles north.
The teardown-rebuild pattern across the older core matters too. New construction sits right beside original 1960s ranch homes on lots subdivided decades ago, and drainage between neighbors can be tight. Before we lay a single paver, we look at where water actually runs off your lot and confirm the new surface won’t push it onto a neighbor’s drive or into your garage sill. Hail and spring storms also matter: a paver driveway survives a hailstorm better than asphalt or stamped concrete, which is one reason we install a lot of them in the 75082 ZIPs around the Campbell Road corridor after storm season.
When a paver driveway is part of a full Driveway & Pavers in Richardson project that includes a front walkway or patio, we sequence the work so the base and drainage are planned once. And if your taste runs less traditional, homeowners often pair this with Cabinets & Countertops in Richardson when they’re refreshing the front-entry look at the same time. For broader exterior work, our Door Installation in Richardson team covers garage and entry doors on the same visit.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Richardson

Most paver driveways in Richardson take 4 – 7 working days from demolition to final compaction. A standard two-car, 400-square-foot drive lands at five to six days. Adding a turnaround or drainage channel pushes it to seven. Call (844) 560-0925 to schedule your free estimate.
Replacing an existing driveway in kind usually doesn’t require a permit, but expanding the driveway footprint, crossing a public sidewalk or right-of-way, or changing the curb cut does. Harris County-adjacent rules don’t apply here – Richardson’s permitting process is city-specific and tied to frontage and right-of-way impact. We check the requirements for your specific address during the estimate. Call (844) 560-0925 and we’ll walk you through it.
Yes, with the right base depth. Richardson’s blackland clay moves seasonally, so we excavate 8 – 10 inches deep and compact crushed limestone base in lifts; that’s the difference between a driveway that stays flat for 20 years and one that shifts in two. Call (844) 560-0925 for a site assessment.
Paver driveway installation in Richardson runs $7,000 – $18,000, with a typical two-car driveway landing around $9,000 – $13,000. Square footage, base condition, paver grade, and drainage scope drive the final number. Call (844) 560-0925 for an exact written quote – estimates are free.
Every paver driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship and installation defects for two full years. Call (844) 560-0925 to review the warranty terms before you commit.
Get a Free Paver Driveway Estimate in Richardson
We’ll walk your driveway, measure the footprint, check the subgrade and drainage, and hand you a written line-item estimate the same visit – at no cost and no obligation. Call (844) 560-0925 and a live person answers, any time. If your project grows beyond the driveway, our Driveway & Pavers service covers the wider scope, and we serve Richardson and the surrounding North Texas area.
Written by the team at Groundwork Construction Co.












