







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Murphy
If you’re in Murphy and your fence is leaning, sagging, or gone after the last hailstorm, you’re in the right place. Groundwork Construction Co. of Carrollton installs wood, vinyl, chain link, and aluminum fencing throughout Murphy’s neighborhoods, and we build every run to handle North Texas wind and hail rather than just to look good on install day. We know the streets here, from the long privacy runs off FM 544 to the corner lots near Murphy Road. Call (844) 560-0925 and a live person picks up, day or night, to set up your free estimate.
Why Groundwork Construction Co. of Carrollton Is Murphy’s Preferred Fence Installation Company

Murphy is a small city, and people here talk. That’s why we do the job the way we said we would, put it in writing, and stand behind it with the 730-Day Done Right Promise. If something isn’t right on a fence we installed, we come back and make it right. That’s not a marketing line; it’s how we keep working in a town where a bad fence run gets noticed fast.
We answer the phone with a live person 24/7, so when a storm takes out a gate on a Sunday night, you’re talking to someone, not leaving a voicemail. Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform. On a property-line fence, that professionalism matters, because a clean, documented installation is what protects you if a neighbor or your insurer ever asks questions.
Upfront pricing means the number on your estimate is the number you pay. No mid-job surprises. We pull the fence permit, verify your platted property corners before we lay anything out, and walk the punch list with you before we call it done. That’s the standard we hold to across Murphy.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Murphy
Most of the fence work we do in Murphy falls into four categories. Here’s how each one plays out on a North Texas lot.
Wood Fence
Cedar privacy fencing is still the go-to for most Murphy backyards, and it’s also the type that takes the hardest hit when hail and high wind roll through. We set posts below the soil-movement zone with proper concrete so the fence holds its line through the wet-dry cycle instead of heaving after a dry summer. Panels are framed and fastened to handle the area’s design wind loads, not just stapled up fast.

Vinyl Fence Installation in Murphy
Vinyl is a smart pick for homeowners near Murphy Road and along the 75094 corridor who want a privacy run that won’t need staining every couple of years. A typical vinyl fence installation in Murphy runs $3,500 – $9,000 depending on linear feet, height, and gate count. We spec panels and posts rated for the local wind speed so the fence stays put instead of bowing in the first big gust.

Chain Link Fence
Chain link still does the job for side yards, pet containment, and property lines where budget and durability matter more than looks. We set galvanized posts to depth and tension the fabric so it stays taut through the seasonal clay movement that throws off shallow-set fences in this part of Collin County.

Aluminum Fence Installation in Murphy
Aluminum ornamental fencing is popular for front-yard and pool enclosures where you want visibility and a clean look. Aluminum fence installation in Murphy runs $4,000 – $10,000, and we use powder-coated systems and wind-rated hardware so gates swing true instead of sagging at the hinges. If you’re matching a neighbor’s existing fence line, we’ll sort out the shared run before any material is ordered.
Trusted Brands We Service in Murphy
We work with a curated set of material partners so you’re choosing quality, not just whatever’s on the shelf. For modern fence and structure packages, that includes systems from Cover and Dvele, whose prefab and panelized components line up well with tight Murphy lots. We don’t claim to stock parts locally; instead, we specify the right material for your run and get it to your property so the crew can set it in one clean pass. On composite and panelized work, that means fewer return trips and a fence built to last, backed in writing by the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Murphy Homes
- Posts set too shallow or without proper concrete. Murphy’s expansive blackland clay swells and shrinks with every wet-dry cycle, so a post that wasn’t set deep enough with real concrete heaves and leans within a season or two. The boards look fine; the footing is the failure.
- Panels and gates without wind-load-rated hardware. Cheap hinges and thin framing fail at the gate during North Texas high-wind and hail events. A gate that snaps off its post takes the whole run out of square.
- Old platted corners nobody checked. Because Murphy was built out almost entirely between the 1980s and 2000s, most fence work here replaces fencing on lots whose property lines were set decades ago. Installers have to locate the platted corners and work from existing lines rather than lay out fresh boundaries, and a mismatch with a neighbor’s run is a common pre-installation negotiation.
- Skipped permits and corner verification. A cheap quote that skips the fence permit and property-corner check leaves you with an unpermitted run. That’s a real problem when you file an insurance claim or sell the house and a survey turns up.
Pricing for Fence Installation in Murphy, TX

Most fence projects in Murphy land in the $3,500 – $9,000 range for a standard residential run, and the biggest swing factors are material, linear footage, height, and gate count. Here’s how the two most common types price out:
| Service | Typical Murphy Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
A fence repaired properly after a storm can be cheaper than a full replacement, but only if the posts are sound. If the footings are heaving, patching boards just buys you a season. We give written, upfront pricing with a line-item estimate and a free project estimate and design consult, so you know what the permit, the concrete, the material, and the labor each cost before you commit. Call (844) 560-0925 for an exact quote; estimates are free.
We Also Serve Cities Near Murphy
Murphy sits close to a handful of cities we work in regularly, so if you’re just over the line we can help. Beyond our Fence Installation work in Murphy, we serve Sachse, Fairview, Plano, and Richardson. If you’re unsure whether your address falls in our coverage, call and we’ll tell you straight.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Murphy

Yes. Residential fence installations in Murphy generally require a permit, and the work should be inspected before final sign-off. A compliant quote includes the permit and the inspection step, so you’re not stuck with an unpermitted run that complicates a claim or a resale survey. Call (844) 560-0925 and we’ll walk you through what your project needs.
A new fence in Murphy should be built and specified to meet the design wind speed for this part of North Texas, with rated panels and hardware rather than standard off-the-shelf fasteners. We size posts, framing, and gate hardware to that standard so your fence holds through high-wind and hail events. Call (844) 560-0925 to talk through ratings for your specific run.
Because Murphy’s expansive clay swells and shrinks with the wet-dry cycle, and a post set too shallow or without proper concrete moves with it. The boards stay straight while the footing heaves, so the failure is really in the ground. Setting posts below the soil-movement zone with adequate concrete is what fixes it. Call (844) 560-0925 for an assessment.
A shared line should be agreed on in writing with the neighbor before any material is ordered or any post is set. On Murphy’s built-out lots, the original platted corners often don’t match a neighbor’s fence run, so a written agreement on the shared line prevents disputes. We verify platted corners first and coordinate the shared scope with you. Call (844) 560-0925 to get started.
A compliant quote includes the fence permit, property-corner verification, posts set to proper depth with concrete, wind-rated panels and hardware, and an inspection sign-off. A cheap quote often skips the permit and the corner check, which leaves you exposed later. Ours is written line-item and upfront, and it’s backed by the 730-Day Done Right Promise. Call (844) 560-0925 for your free estimate.
Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Call (844) 560-0925 to schedule your free estimate.
Written by the team at Groundwork Construction Co.












