







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Driveway Sealing Costs in Carrollton, TX (And Why August Is a Bad Time to Do It)
Driveway sealing in Carrollton runs $250 to $700 for a typical residential driveway, with most local jobs landing in the $350 to $550 range depending on square footage, surface condition, and whether cracks and expansion joints need attention first. Call (844) 560-0925 for a written, upfront quote before you schedule anything. One warning before you book: the cheapest quote you get in July or August is often money thrown away. Here’s why.

The asphalt sealers and concrete sealers sold to Carrollton homeowners all specify an application window of 50°F to 90°F surface temperature. In a Carrollton August, concrete and asphalt routinely hit 140°F to 160°F on a sunny afternoon. Sealer applied above 90°F flashes off too fast to bond, cures with trapped solvent, and starts peeling or tracking within a season. We’ve seen it happen on slab driveways across the Ranchwood and Rosemeade subdivisions. You paid once. Now you’re paying again in the spring.

Why the Calendar Matters More Than the Sealer Brand in Carrollton
Sealing a driveway in North Texas isn’t a yearly maintenance item the way it is in Ohio or Virginia. It’s a chemistry problem tied to temperature and moisture.
The optimal windows here are March through early May, and late September through early November. That’s when surface temps sit in the 70s and low 80s, humidity is moderate, and the 24-hour cure window won’t get interrupted by a pop-up storm. Most budget sealing companies won’t tell you this because their business model is spray-and-go, 12 months a year. When you call, ask the scheduler point-blank: “What surface temperature do you need for the sealer to bond?” If they can’t answer that, hang up.
Here’s what the local conditions look like in practice:
- Spring storms carry road salts, grit, and municipal debris off the streets and down your driveway, and anything left on an unsealed surface accelerates oxidation and etching.
- North Texas UV intensity breaks down asphalt binder faster here than in most of the country, which is why our driveways go gray and chalky years before the same surface would in a cooler climate.
- Expansive clay soils under almost every Carrollton slab move with the wet-dry cycle, opening hairline cracks at the slab edges and around expansion joints that have to be filled before any sealer goes down.
- Original 1960s and 1970s driveways from Carrollton’s postwar building boom are often at the end of their service life, and no coat of sealer fixes a crumbling base.
Concrete vs. Asphalt: The Sealer Chemistry Most Companies Skip
Half the driveways in Carrollton are concrete, half are asphalt, and the two surfaces need entirely different sealers. This distinction gets lost when a company shows up with one 55-gallon drum and treats every job the same.
For concrete slab driveways – which is what most Carrollton homes have – a film-forming acrylic sealer is usually the wrong answer. It looks glossy for six months, then peels. The reason: slab-on-grade concrete needs to transmit moisture vapor from the ground below. A film-forming sealer traps that vapor under the film, and when the vapor pressure builds up, the coating lifts. If your neighbor’s driveway is peeling off in sheets, that’s usually why.
The right chemistry for Carrollton concrete is a penetrating silane-siloxane sealer. It soaks into the pores of the slab, reacts with the free lime in the concrete, and lines the capillary walls from the inside. No film to peel, no trapped moisture, no vapor problem. Water beads up on the surface and runs off. We specify penetrating sealers on every Carrollton concrete driveway for exactly this reason, and we use Quikrete and Sakrete repair products for the crack filling and joint work that comes before sealing.
For asphalt, a quality acrylic or coal-tar-free emulsion sealer is the correct choice, but the prep work matters. Cracks get blown clean and filled with hot-pour rubber, oil spots get primed, and the edges get built up by hand, not sprayed with a wand pointed vaguely at the curb.


What Sealing Actually Costs in Carrollton
Written pricing is the whole point of this page, so here are the real line-item numbers we use for Carrollton projects. These are the same ranges we quote over the phone before we ever send someone out.
| Service | Price Range |
|---|---|
| Driveway sealing (residential) | $250-$700 |
| Crack filling / joint resealing (add-on) | Quoted on-site, no surprise charges |
| Driveway replacement (if sealing isn’t enough) | $5,000-$14,000 |
| Concrete driveway installation | $4,500-$12,000 |
| Asphalt driveway paving | $3,500-$9,000 |
| Paver driveway installation | $7,000-$18,000 |
Surface prep, cracks, and expansion joint reseating are baked into the quote – not tagged on after the truck arrives. If you notice cracking or sealer failure the day after a hailstorm, we answer the phone 24/7 with a live person. You don’t wait until Monday morning to find out whether your warranty covers it. Every sealing project we do is covered by the 730-Day Done Right Promise – if the sealer fails, we come back.
If the driveway is more than 20 years old and cracked through the base, sealing is throwing good money after bad. Replacement lives in the $5,000-$14,000 range, and paver installation is $7,000-$18,000. When sealing won’t get you another decade, we say so plainly during the free estimate and walk you through what the alternative costs – no high-pressure pitch. If paver work is on your radar, our Driveway & Pavers in Carrollton service covers the design side, and our other work is outlined on the home page.
What a Proper Sealing Job Looks Like on a Carrollton Driveway
Here’s the sequence our crews follow, and it’s a fair checklist to hold any sealing company to.
- Surface check. We measure square footage, check for efflorescence, oil stains, and hairline cracks, and note the driveway’s age and slab construction.
- Clean and degrease. Pressure washing to remove grit, followed by a degreaser on oil spots – sealer won’t bond to oil.
- Crack and joint work. Hot-pour or polyurethane filler on every crack, and reseating any failed expansion joints. This is where cut-rate jobs fall apart.
- Cure and dry. A full 24 to 48 hours of dry time for concrete before any penetrating sealer goes on. Rushing this step is the number-one cause of sealer failure we see.
- Application. Two light coats, back-brushed into the surface, never sprayed and left. Spray-and-go drives uneven coverage and puddles at the slab edges.
- Walkthrough. A final look at the finish and a written cure timeline – 24 hours before foot traffic, 48 to 72 hours before vehicles, longer if it rains.
Our technicians arrive in uniform and are background-checked, and our calls are answered 24/7 by a real person, not a voicemail. Our technicians have up to 12 years of experience on driveways, patios, and hardscape work across North Texas. When we stage a job around alley access – a real constraint in Carrollton’s older ranch-home subdivisions, where dumpsters and concrete trucks have to fit the same alley that the neighbors use – we plan it before we get there.
FAQs
Driveway sealing in Carrollton costs $250 to $700 for a typical residential driveway, with most jobs in the $350 to $550 range. The price depends on square footage, surface condition, and whether cracks or expansion joints need repair first. Call (844) 560-0925 for an exact quote – estimates are free and written.
Usually not, and that’s the honest answer. Most sealers need surface temperatures below 90°F, and Carrollton concrete and asphalt regularly hit 140°F or higher on a summer afternoon. Applying sealer above that temperature causes flashing, peeling, and premature failure. We schedule Carrollton sealing jobs from March through early May and late September through early November, when surface temps cooperate.
Sealing is much cheaper at $250-$700 versus $5,000-$14,000 for a replacement, but only if the driveway base is still sound. A slab with structural cracks through the base or crumbling edges won’t be saved by sealer. During the free estimate, we tell you plainly which category you’re in. Call (844) 560-0925 to book a look.
We use a penetrating silane-siloxane sealer on Carrollton concrete slabs. Film-forming acrylics trap the moisture vapor that a slab-on-grade driveway needs to release, which is why so many driveways in this climate peel within a season. Penetrating sealers bond into the concrete itself, so there’s no film to fail.
Get a Written Sealing Quote Before the Weather Turns
The window between now and the next cool, dry stretch of Carrollton weather is short, and a proper sealing job takes planning. We give you written, upfront pricing for sealing as a standalone service or as part of a bigger exterior project – no hidden add-ons for prep or crack repair. Book a free project estimate and design consult today. Call (844) 560-0925 – a real person answers, day or night – and lock in a slot before the surface temperature window closes.
Written by the team at Groundwork Construction Co. of Carrollton, serving Carrollton, TX.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong












