







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Allen, TX: What It Costs and How Long It Takes
Asphalt driveway paving in Allen runs $3,500 – $9,000 for a standard residential drive, and resurfacing an existing one usually lands at the low end of that band. Most Allen jobs are done in a single visit for the resurfacing itself, with a short cure window afterward before you park on it. Call (844) 560-0925 for a free on-site estimate and we’ll tell you whether your drive needs a full rebuild or just a new surface course.

How We Do This Job, Start to Finish

Asphalt work has a rhythm to it, and knowing it up front keeps you from guessing what’s happening on your property. Here’s the sequence we run on Allen properties, with what you decide and when.
1. Site assessment and drainage check (day 1, about an hour)
We walk the drive and look at slope, crown, and where water runs off during a storm. On acreage and long service drives around Allen, this matters more than people expect – a drive that pools water will fail early no matter how good the asphalt is. You get a written line-item quote with the surface options priced separately, so you can compare a full rebuild against a resurface without a sales pitch.
2. Removal and base prep (day 1, three to six hours)
For a full rebuild, we remove the failed asphalt, regrade the base, and compact it in lifts. For resurfacing, we clean, mill or level the worst high spots, and fill cracks and depressions before anything new goes down. Base is where most of the money and most of the longevity live on a long drive. Skipping it is why cheap driveways fail in three years.
3. Grading and drainage correction (day 1, one to two hours)
We reset the crown so water sheds to the edges instead of sitting on the surface. On Allen’s clay, water trapped against the slab or a garage apron is a real problem, and we’ll flag it while we’re there. You approve any drainage add-ons – a swale, a culvert, a regraded shoulder – before we proceed.
4. Paving and compaction (day 1, two to four hours)
Hot-mix asphalt goes down at the right temperature and gets rolled in passes to density. For a reseal or a thin overlay, this is the whole job. For a full rebuild, this is the final surface course over a cured base. You’ll see the edges, transitions, and apron meet the garage cleanly before we leave.
5. Cure and handoff (days 2 – 7, mostly waiting)
You stay off the drive at least 24 – 48 hours, and heavier vehicles wait longer. We do a final walkthrough, hand you the written warranty, and note anything worth watching over the first season. The 730-Day Done Right Promise covers workmanship, so if something settles or cracks prematurely, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Nobody has a true “asphalt” choice – it’s the surface course that varies. Here’s the honest trade-off on each.
- Hot-mix asphalt over a new base: the full rebuild. Best long-term result, highest cost, holds up well in North Texas heat and clay movement if the base is done right. Suits failing drives and long service drives.
- Overlay over an existing sound surface: a new course over good asphalt. Cheaper, faster, and a good fit when the base is intact. Doesn’t fix underlying drainage or base failures.
- Sealcoat and skin resurfacing: a thin protective layer on a drive that’s still structurally solid. Keeps water out and buys years, but it won’t hide real cracks or a heaved slab.
- Asphalt vs. concrete edge aprons: many Allen homeowners keep asphalt for the drive and concrete for the apron and transitions. It looks sharp and adds durability where tires scrub hardest. We price both halves separately.
If your project is part of a larger Driveway & Pavers in Allen scope, we’ll line up the trades so you’re not coordinating two contractors.

What Asphalt Driveways & Resurfacing Costs in Allen, TX

For Allen residential work, asphalt driveway paving runs $3,500 – $9,000. Resurfacing a sound drive typically falls at the lower end; a full rebuild on a long service drive pushes toward the top. Here’s what actually moves the number:
- Square footage and length: a long rural service drive costs more simply because it’s more material and more rolling passes.
- Base condition: failed base means removal and rebuild, not overlay. That’s the biggest swing in the quote.
- Drainage work: a culvert, swale, or regrade adds cost but prevents a repeat failure.
- Access and grading: tight turns and slope changes slow the crew down.
- Surface grade: a thicker, hotter-mix surface course costs more and lasts longer.
Your written estimate lists what’s included – prep, material, compaction, cleanup – and what isn’t, like drainage add-ons or fence relocation. Upfront pricing, no surprises: the number you see is the number you pay. We also offer 0% financing for 18 months, and $1,000 off projects over $10,000, which matters on rebuilds and long drives.
See the difference
Before
After
Before
After
Before
AfterWhat Allen Homes Specifically Do to This Job
Allen grew from a rural town into a Collin County suburb in the late 1980s and 90s, so most of its subdivision stock sits in a narrow build era. That means many of the drives we see in 75013 and 75002 are hitting their first true replacement window at once – not a patchwork of 60-year-old fixes. The expansive black clay under those slabs is the other factor. A drive that looks flat in a wet spring can heave and crack by August, and water pooling against the garage apron speeds that up. We see it constantly around the US-75 and Exchange Parkway corridors where newer townhomes and infill sit on the same soils. On acreage properties, the long service drive to a detached shop is usually where the first failure shows up. If a drainage correction is on the table, that’s often part of a full Driveway & Pavers plan. Homeowners often pair a fresh drive with Chain Link Fence in Allen along the property line, and with ADU Site Prep & Utilities in Allen when a detached structure is going in. We cover the full Allen area, from the established subdivisions to the newer infill.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in Allen

Most resurfacing jobs are done in a single visit, with cure time before you park. A full rebuild on a long drive can stretch across two or more days depending on base prep. Call (844) 560-0925 for a firm timeline once we’ve seen the site.
Often yes, depending on whether the work touches a public right-of-way, a sidewalk, or drainage. We’ll tell you at the estimate whether your specific scope needs one and walk you through it. Estimates are free, so it costs nothing to ask.
Yes, when the base underneath is still sound. Overlays and sealcoats are the right call on a structurally solid drive and a waste of money on a failing one. We test for that before quoting. Call (844) 560-0925 to find out which side of the line your drive is on.
Paving runs $3,500 – $9,000 for a standard residential drive, with resurfacing at the low end and a full rebuild on a long drive at the top. Your exact price depends on square footage, base condition, and drainage. Call (844) 560-0925 for an exact quote – estimates are free.
Every job is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s two full years on our workmanship, in writing. Call (844) 560-0925 to schedule a free on-site estimate and see the terms up front.
Schedule Your Free Allen Estimate
If your asphalt drive is cracking, heaving, or just past its useful life, a free on-site estimate is the fastest way to know what you’re really dealing with. Call (844) 560-0925 and a live person answers, day or night. We’ll walk the property, check the base and drainage, and hand you a written line-item quote – no pressure, no surprises. Estimates are free.
Written by the team at Groundwork Construction Co.












