







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Carrollton: What to Know First
PGT window and door work in Carrollton usually runs $4,500 – $25,000 depending on scope, with most straight window replacements finishing in a single visit and impact installations taking one to three days. We’re an independent PGT service provider – not affiliated with or authorized by PGT – and we quote the full job upfront so the number you see is the number you pay. This page is for Carrollton homeowners who already own PGT windows or doors and want them repaired or replaced by people who know the product line. Call (844) 560-0925 for a free estimate.
How PGT Products Fail – and How We Fix Them
PGT builds solid windows and doors, but the Texas heat and the way these units are installed both leave marks. Here’s what we actually see when we open up a PGT unit in Carrollton.
- WinGuard impact glass with seal failures. The laminated interlayer in WinGuard units is tough, but when the perimeter seal on the IG unit breaks, moisture creeps between the panes and the glass hazes from the edges in. Carrollton’s summer heat cycling accelerates it. We replace the sealed unit with a matching WinGuard assembly rather than swapping to standard glass, which would quietly strip the impact rating.
- Aluminum-frame thermal movement in PGT Aluminum series. Aluminum expands and contracts hard in North Texas. On older PGT aluminum sliders and fixed units, that movement works the corner welds and perimeter caulk loose, and you get water tracking in along the sill. We reset the frame, reflash the sill, and reseal with a flexible joint sealant rated for the temperature swing instead of a rigid bead that cracks again next summer.
- Roller and track wear on PGT sliding glass and patio doors. Slider rollers on PGT doors wear flat and the door starts dragging or jumping the track. The real cause is usually a tired roller assembly plus debris packed into the bottom track, not a bent panel. We replace the rollers with correct-tolerance parts and true the track instead of forcing the door.
- Multi-point hardware drift on PGT hinged and entry doors. Multi-point locking systems go out of adjustment over time and the door stops latching clean. We adjust the strike and keepers and replace worn gears with OEM-spec hardware, because generic hardware throws the door out of alignment and voids the warranty on the door itself.
- Failed glazing tape and gaskets at the frame. PGT units with gasket seals can dry out and allow air and water past the frame edge. We replace the gaskets and re-glaze with the correct tape, which is the difference between a fix that holds for years and one that fails within a season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
Every PGT job follows the same sequence, whether it’s a single failed sealed unit or a full house of impact windows.
- 1
Diagnostics on site. We identify the exact PGT series, measure the unit, and trace the failure to its real cause – seal, frame, hardware, or installation – so we’re not guessing at the fix.
- 2
The parts decision. We tell you straight when OEM parts are the right call and when a quality aftermarket equivalent makes sense, especially on discontinued lines where OEM stock has dried up. On warranty-sensitive components like locking hardware and impact glass, OEM-spec is the default.
- 3
Upfront pricing in writing. Line-item pricing before any work starts. No surprises, no change orders on the number we quoted.
- 4
The work. Background-checked, uniformed technicians handle the repair or replacement. Most jobs are completed in a single visit.
- 5
Testing. Every window and door gets operated, latched, and checked for water tightness and air seal before we call it done.
- 6
The 730-Day Done Right Promise. If it’s not done right, we make it right – for 730 days.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Windows & Doors Costs in Carrollton

These are real ranges for PGT work in the Carrollton market. Impact glass and larger openings run higher, and older homes with frame repair needs land at the top of the range.
| Job | Typical Range in Carrollton |
|---|---|
| Window Replacement (standard PGT units) | $4,500 – $15,000 |
| Impact Window Installation (WinGuard) | $8,000 – $25,000 |
| Single sealed-unit replacement on existing PGT frame | Lower end of the window range, priced per unit |
What moves the price: number and size of openings, impact vs standard glass, whether the frame is sound or needs reset, and whether the units are original to the house. Call (844) 560-0925 for an exact quote – estimates are free, and the price we give you is the price you pay.
Why Carrollton Homeowners Call Groundwork Construction Co. of Carrollton for PGT Work
We’ve been in business since 2014, and our technicians bring up to 12 years of experience on window and door work. Calls are answered by a live person 24/7, so you’re not leaving a voicemail and waiting until Monday. Every PGT job is covered by our 730-Day Done Right Promise and backed by upfront pricing that doesn’t shift once work starts. Alongside PGT, we service the other brands Carrollton homeowners ask about – KraftMaid cabinetry, Kohler fixtures, GAF roofing systems, and Master Halco fencing – so a PGT window job can grow into a full scope under one contractor. From foundation to finish line, built to last, backed in writing.
FAQs

Will repairing my PGT windows void the manufacturer warranty? Not if the work is done right. Using OEM-spec glass and hardware and following PGT’s installation requirements keeps the warranty intact on the unit. Cutting corners – swapping in standard glass or generic locking hardware – is what risks coverage, and that’s why we default to OEM parts on warranty-sensitive components. Call (844) 560-0925 for an exact quote – estimates are free.
Can you still get parts for older PGT windows in Carrollton? Usually yes, but availability depends on the series. Some older PGT lines have limited OEM stock, and for those we source a quality aftermarket equivalent or a matched sealed unit. We tell you on site which path makes sense before we order anything. Call (844) 560-0925 for an exact quote – estimates are free.
Is it better to repair or replace a PGT window? Repair wins when the frame and hardware are sound and only the sealed unit or a roller has failed – that’s the lower-cost path. Replace makes more sense when the frame is failing, seals are gone across the whole unit, or an older window needs to be brought up to impact ratings. We diagnose first, then tell you straight. Call (844) 560-0925 for an exact quote – estimates are free.
How fast can you get out for a PGT window or door problem? We answer calls 24/7 by a live person, and most PGT repairs are scheduled quickly depending on part availability. Straightforward repairs like roller replacement or hardware adjustment are typically done in a single visit. Call (844) 560-0925 to schedule your free estimate.
Do you pull permits for PGT window replacement in Carrollton? Yes. Window replacement often requires permits in Carrollton, and we handle that as part of the job so the work is inspected and documented properly. Call (844) 560-0925 for an exact quote – estimates are free.
Ready to get your PGT windows and doors sorted by people who know the product line? Call Groundwork Construction Co. of Carrollton at (844) 560-0925 for a free estimate and design consult. We’ll walk your openings, trace the real cause of the failure, and give you the number upfront – backed by our 730-Day Done Right Promise. Live answers, 24/7, and financing available at 0% for 18 months.
Written by the team at Groundwork Construction Co. of Carrollton, serving Carrollton and nearby areas.












