







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in University Park, TX: What It Costs and How Fast It Goes In
A chain link fence in University Park, TX typically runs $3,500 to $9,000 installed, depending on linear footage, height, gauge, and how tight the side-yard access is on your lot. Most residential jobs are measured in a single visit and built in one to three days once the layout is marked and the utilities are located. Call (844) 560-0925 and we’ll set up a free on-site estimate and walk the property line with you.

How a Chain Link Fence Goes Up Here, Start to Finish

Every job follows the same sequence. What changes is how much of it happens in a narrow side yard with your neighbor’s kitchen window twelve feet away.
Stage 1: Measure and mark (day of estimate, 30 to 45 minutes)
We pull the platted lot lines and walk the fence route with you, flagging the corners, gate posts, and any point where the fence will sit within a foot or two of an existing structure. On a 50-foot-wide University Park lot, the side-yard run is where the decisions happen, so this is the stage where you tell us whether you want the line tight to the property boundary or pulled in for maintenance access. You’ll know the linear footage and the footage breakdown by gate before we leave.
Stage 2: Utility locate and permit (2 to 5 business days)
We call for the locate on buried lines before anyone touches a shovel. If your run needs a permit under the town’s fence and structure rules, we handle the submittal. Homeowners who want the fence built during a specific week should expect this window to be the schedule driver, not the build itself.
Stage 3: Demo and layout (half a day)
Old fence comes out, posts are set out on string lines at the exact spacing, and we confirm the gate swing with you in person before any concrete is poured. Gate swing is the single decision most homeowners change their mind about, so we settle it here rather than after the posts are in the ground.
Stage 4: Post setting and cure (1 day plus cure time)
Line posts and terminal posts go in with concrete at each hole. Terminal posts at corners, ends, and gates get larger footings and heavier concrete because they carry the tension of the whole run. Set concrete needs to cure before we pull fabric, which is why a two-day job often books across three calendar days.
Stage 5: Fabric, rails, gates, and walkthrough (half to one day)
Top rail, tension bands, fabric, and gate hardware go on, then we tension the run and check every gate for latch and swing. You walk the line with us at the end. Any sag, any post out of plumb, any gate that drags gets corrected before we call the job done. All of it is covered under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Chain Link Fence
Chain link isn’t one product. The spec sheet below is where the price spread lives.
- Gauge of the fabric and the pipe. Eleven-gauge fabric and heavier wall pipe cost more and hold their shape through a North Texas hail season far better than the lighter residential-grade material. On a fence that borders an alley or a busy side street, the heavier gauge is the one worth paying for.
- Height. Four-foot and five-foot runs are the common residential spec. Six-foot adds material cost and, more importantly here, changes how the fence reads from the street on a narrow lot.
- Coating. Galvanized is the baseline and the least expensive. Vinyl-coated chain link holds color, resists the rust bloom that shows up on galvanized after a few wet-dry cycles, and blends better against brick and landscaping. Coated runs typically add a meaningful percentage to the material line.
- Gate style and hardware. Walk gates with self-closing hinges and a keyed latch are the standard for a side yard that opens to a driveway. Double drive gates cost more because of the heavier frame and the additional terminal posts they require.
- Top rail and tension structure. A full top rail with brace bands and tension bars keeps the fabric from sagging over time. Skipping the top rail saves money up front and costs you a wavy fence in three years.
- Privacy add-ons. Slats or windscreen inserts give you visual screening without changing the fence frame. Worth it on a lot where the neighbor’s second story looks straight down into your side yard.
What a Chain Link Fence Costs in University Park, TX
Residential chain link fencing in University Park lands between $3,500 and $9,000 for a typical lot. The low end fits a straightforward side-and-rear run on a clean property line. The high end covers longer footage, six-foot height, coated fabric, multiple gates, and the access coordination that tight Park Cities lots demand.
Here’s what pushes a job from one end of that range to the other:

- Linear footage and gate count. The single biggest driver. Every gate adds terminal posts, heavier hardware, and additional labor.
- Side-yard clearance and staging. On lots where the only access is a 36-inch gap between houses, material has to be hand-carried and the dumpster or spoil pile goes on the street. That coordination with the town adds time and cost.
- Existing fence and obstructions. Concrete footings from an old fence, tree roots in the run, and buried irrigation all add demo and relocation work.
- Material grade. Gauge, coating, and pipe wall thickness move the material line by a wide margin on the same footage.
- Permit scope. Height and placement relative to the property line determine whether the town wants a review before the build.
Our written estimates are line-item: footage, posts, gates, hardware, demo, and permit line if one applies. Upfront pricing, no surprises, and nothing gets added mid-job without your sign-off.
See the difference
Before
After
Before
After
Before
AfterWhat University Park Homes Specifically Do to This Job
University Park is a built-out, landlocked Park Cities enclave, and that shapes fencing more than most homeowners expect. Lots in the 75225 ZIP often run only 50 feet wide with zero-lot-line-style tight side yards, so a chain link fence here is less about open acreage and more about squeezing a clean run through a gap between two occupied homes. Staging, dumpster placement, and equipment access routinely spill onto the street and get coordinated with the town before we start. Side-yard setback and lot-coverage limits, not the building code, are what actually decide where the fence line can sit.
The housing stock tells the rest of the story. Original 1920s-to-1950s brick bungalows, Tudor cottages, and period revival homes sit next to a steady stream of teardown-rebuild custom homes and second-story additions. When you’re fencing next to a rebuild, the neighbor’s contractor may be staging in the same narrow gap, and that gets sorted in the schedule, not on the day of. The blackland clay under North Texas yards expands and contracts with wet-dry cycles, which is why post footings here get set deep and poured solid rather than skimped. If your fencing is part of a full Fence Installation in University Park, we coordinate the whole run at once. Homeowners rebuilding or reworking a structure often pair this with ADU Site Prep & Utilities in University Park or a Door Installation in University Park so site access is handled in one pass.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in University Park

Most residential chain link fences in University Park take one to three days of on-site work once posts are set and cured, with the utility locate and any permit review adding two to five business days before that. The build itself is fast; the front-end paperwork is what sets the calendar. Call (844) 560-0925 for a free estimate and a realistic schedule for your lot.
Fence height and placement relative to the property line determine whether the town requires a permit review, and tight lots near setback lines are the ones most likely to need it. We check the requirement for your specific address during the estimate and handle the submittal if one applies. Call (844) 560-0925 and we’ll tell you what your property needs.
Usually yes. Post holes are typically ten inches wide, and we hand-dig or relocate irrigation lines around the run rather than trenching the whole yard. Tree roots in the path get worked around where the layout allows. Call (844) 560-0925 and we’ll walk the line with you before any digging starts.
A typical residential chain link fence in University Park runs $3,500 to $9,000 installed. Footage, height, gauge, coating, and gate count move the number within that range, and side-yard access on narrow lots adds labor. Call (844) 560-0925 for an exact quote – estimates are free and line-item.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on posts, tension, and gate hardware for the full term. Call (844) 560-0925 to schedule your free estimate.
Get a Free Chain Link Fence Estimate in University Park
Call (844) 560-0925 and we’ll schedule a free on-site estimate for your chain link fence in University Park. We measure the run, check the property line, flag any permit or setback question, and leave you with a written line-item quote. Calls are answered by a live person, 24/7. Our technicians have up to 12 years of experience, and every project is covered by the 730-Day Done Right Promise. See our Fence Installation service for the full scope, and check the University Park service area page to confirm coverage.
Written by the team at Groundwork Construction Co.












