







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Carrollton, TX
Custom and geometric windows are made to a specific size, shape, or angle instead of pulled from a standard catalog: arched tops, half-rounds, trapezoids, triangles, eyebrow curves, and full custom rectangles that fill a wall exactly. Homeowners in Carrollton call us for these when a stock window leaves odd gaps around a staircase, a two-story entry, a bonus-room gable, or a 1980s ranch with wall sizes that never matched a big-box SKU. If you’re weighing custom shapes against a standard replacement, start with our Windows & Doors page for the full picture, then call Groundwork Construction Co. of Carrollton at (844) 560-0925 for a free estimate.
Here’s what makes us a solid fit for this work: we’re a full-scope construction company, so window openings, framing, and exterior finishes get handled as one job rather than three separate trades pointing at each other. We work with Andersen and Marvin for custom units and line up the rest of the job around them. Every project is covered by our 730-Day Done Right Promise, which means if a mulled miter joint or a sill detail doesn’t hold up, we come back and make it right. Calls are answered by a live person 24/7, and background-checked, uniformed technicians show up on every job.
Key Takeaways
- Custom and geometric windows are built to an exact opening or angle, not trimmed down from a stock size.
- Carrollton’s mix of 1970s-90s housing and newer infill means unusual opening sizes are common, and custom units solve them cleanly.
- Expect a longer lead time than stock (typically 4 to 11 weeks depending on material, shape, and finish) and a range from roughly $850 to $4,000+ per custom unit installed, excluding structural framing.
- We quote the full number upfront so you know the total before work starts, and all projects are backed by our 730-Day Done Right Promise.

When You Need Custom & Geometric Windows
Most people don’t set out to buy a trapezoid window. The house usually asks for one. These are the situations we run into across Carrollton:
- A gable or vaulted ceiling that no rectangle fits. The triangular wall under a roof peak in a Carrollton bonus room or two-story foyer won’t take a stock window without a big blank margin. A shaped unit fills that opening and adds real light.
- A staircase wall with a slanted line. Two-story entries along Josey Lane and in the older sections of town often have a diagonal following the stairs. A custom angled window reads intentional instead of forced.
- An arched or radius top over a front entry. If you’re matching brick or stone arches on a Carrollton home, a half-round or eyebrow window keeps the proportions working.
- Replacing a failed original that no longer matches any catalog. Builders in the 1980s and 90s used all sorts of odd sizes. When one of those windows fails, custom is often the only way to avoid a framing change.
- A remodel that changes the opening. Adding a bay, converting a porch, or reworking an exterior wall means the opening is now something new, and a custom unit meets it exactly.
- Energy and water performance on a tricky wall. East- and west-facing shaped windows in Carrollton take a heavy sun load and spring storm exposure. A custom unit lets us specify the right glass package and flashing detail for that orientation.
Our Custom & Geometric Windows Process
Shaped windows live or die on measurement and water detailing. Our process keeps both tight:
- Free in-home measure and design consult. We template the actual opening and confirm the shape, radius, and pitch. We talk through materials and glass options so you know what you’re choosing before anything is ordered.
- Written quote with upfront pricing. You get the number, line by line, with no surprises later. If the project is over $10,000, the $1,000 off applies, and 0% financing for 18 months is available if you want to spread it out.
- Custom fabrication and scheduling. We order from our brand partners and coordinate fabrication times, then set a window install date with you so you’re not waiting around.
- Install with weather-sealed detailing. Our technicians set the unit plumb and true, flash the sill and head, and tie the exterior in so water sheds the way it should. Background-checked and uniformed on every job.
- Final walkthrough and the 730-Day Done Right Promise. We check operation, seal, and fit together and back the workmanship in writing for the full warranty period.

Custom & Geometric Windows Pricing in Carrollton
Custom and geometric windows in Carrollton typically run $850 to $4,000+ per unit installed, with most single shaped windows landing in the $1,200 to $2,600 range. The number depends on size, shape complexity, material, and glass package. These ranges are honest starting points, not final quotes.
| Item | Typical Range |
|---|---|
| Small shaped or radius unit (single, standard glass) | $850 – $1,500 |
| Mid-size custom rectangle or arch, premium material | $1,500 – $2,600 |
| Large geometric unit, multi-pane, energy glass | $2,600 – $4,000+ |
| Framing or opening modification | $400 – $1,800+ |
| Exterior trim and flashing detail | $250 – $900 |
What affects the price
- Shape complexity. A half-round is simpler to build than a matched-arch group or a multi-lite trapezoid.
- Material. Wood-clad and premium materials cost more than standard vinyl but often fit the look of a Carrollton home better.
- Glass package. Low-E, argon, and impact-rated glass add to the unit price but pay back over years of Texas heat.
- Framing. If the opening has to change to accept the unit, that’s extra labor and materials.
- Access. Second-story and vaulted-ceiling openings take more setup and sometimes equipment.
We price it upfront, the number you see is the number you pay. If you’re planning a larger project alongside this, the $1,000 off projects over $10,000 and 0% financing for 18 months make it easier to do it all at once. Call (844) 560-0925 for a free estimate.
Why Custom Windows Cost More Than Stock in Carrollton
Stock windows are cheap because they’re made in bulk to standard sizes. Custom units are built to your opening, your radius, and your glass spec, so there’s no cutting corners in fabrication and no leftover wall to patch. In Carrollton, that often means less visible filler around the frame and a cleaner look from the street. It also means a longer lead time. We give you a real date instead of a vague “a few weeks” so you can plan around it.
Our material partners include ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru for doors and framing systems that need to match your new window profile. We choose the brand that fits the job, not the other way around.
Matching Shapes to Carrollton Homes
Custom windows look best when the shape belongs to the house. A few local patterns we see:
- Front-entry arches on brick and stone Carrollton homes pair well with half-round or eyebrow units above the door.
- Two-story foyers along the Josey Lane corridor often take a stacked or angled unit that follows the stair.
- Bonus rooms and gable walls in newer infill homes take triangular and trapezoid units that fit the roofline without wasted wall.
We walk the exterior with you during the consult so the shape you pick works with the roof pitch and the trim, not against it. For a wider look at how windows and doors work together on the same house, see our Carrollton service area page.
How Long Do Custom Windows Take to Arrive?
Custom windows typically take four to eleven weeks to arrive in Carrollton, depending on shape, material, and glass. Simple rectangles and half-rounds often come in on the shorter end; complex multi-lite geometric units and premium materials run longer. We schedule the install date once fabrication is confirmed so you’re not guessing.
Energy and Weather Performance for Shaped Windows
A shaped window can be a weak point if it’s not built right. We specify glass packages matched to the wall’s orientation, and we detail the flashing and sill so Carrollton’s spring storms and summer heat don’t find a way in. Choose low-E and argon for east/west walls that take a beating from the sun. Ask us about impact-rated options if you want extra protection against hail.
FAQs – Custom & Geometric Windows
How much do custom and geometric windows cost in Carrollton?
Custom and geometric windows in Carrollton typically run $850 to $4,000+ per unit installed, with most single shaped windows in the $1,200 to $2,600 range. Framing changes and premium glass push it higher. Call (844) 560-0925 for an exact quote, estimates are free.
Can you match a geometric window to my existing arch or angle?
Yes. We template the actual opening and build the unit to that exact shape so it fits your brick or stone arch and roofline. Bring us the measurements or let our technicians measure during the free consult.
How long does installation take?
Most single shaped or custom windows install in a single visit once the unit arrives. Complex openings, second-story walls, or multiple units may take an extra day. We confirm the schedule with you ahead of time.
Is it cheaper to repair or replace a damaged shaped window?
It depends on the damage. A broken pane or worn seal is often repairable; a warped frame or failed sill usually means replacement. We’ll tell you straight which makes sense for the opening. Call (844) 560-0925 to talk it through.
Written by the team at Groundwork Construction Co. of Carrollton, serving Carrollton.
Ready to figure out what your opening needs? Call Groundwork Construction Co. of Carrollton at (844) 560-0925 for a free estimate. We answer live 24/7, quote upfront pricing, and back every custom window with our 730-Day Done Right Promise.


